Thunderbird 80 cu. ft Neutrally Buoyant Tank with Pro Valve

The Thunderbird Aluminum SCUBA tanks are durable, reliable, and visually appealing. The tank is manufactured from the industry standard lightweight, high-strength aluminum 6061-T6 alloy. The Neutrally Buoyant 80 cubic foot has an ample air capacity and better buoyancy characteristics in comparison to a standard 80 cylinder. The 80 cubic foot bottle has a 3300 psi (228 bar) service pressure rating, a capacity of 76.2 cu. ft. (10 liters), is negative 4.1 lbs. (1.9 kg) when full and is positive 0.8 lbs. (0.4 kg) at 500 psi (35 bars). Cylinder weighs 33.4 lbs. (15.2 kg) when empty, and measures (Dia. x L) 7.25" x 25.4" (184mm x 645mm). Aluminum cylinders unlike steel cylinders don't rust, they oxidize. The oxidization of aluminum forms a protective coat that hinders the continuation of corrosion making aluminum cylinders less likely to be condemned due to excessive corrosion. When shipped the tanks valves will be removed and the tank will require re-inspection before being filled.
Note:
All Thunderbird Aluminum cylinders are nitrox ready up to 40% and meet certificated specifications of the US Department of Transportation (DOT) with DOT-3AL specification and Transport Canada Safety and Security (TC) with TC-3ALM specifications. Purchasers should check with other country requirements to know if the cylinders are certified for use in that country.

Thunderbird's Valves are designed and manufactured for long life and heavy use. The Thermo by Thunderbird Pro Valve is no exception. Valve is made of marine grade brass with triple bright chrome plating for long life protection in salt water. Precision machined from high tension brass and chrome plated valve stems for years of service and corrosion free operation. The high-pressure seat is nylon. The Pro Valve will accommodate both Yoke and DIN regulators with its removable 230 bar (3,336 psi) DIN insert which can be removed using a 1/4" hex key wrench.

Easy grip soft rubber hand wheel with stainless steel insert ensures long life and large ribs make turning handle easy even when wearing gloves. Valve bonnets are copper crush washer sealed. Valve is equipped with a one-piece safety plug, has a 5/32" hex wrench dip tube for positive retention and 3/4" x 14 NPSM inlet threads which fit nearly all DOT aluminum and modern steel cylinders. All this and more makes this the valve of choice for the serious diver. The valve has a 3300 (228 bars) service pressure. Valve is Nitrox compatible up to 40%.