Hyperlite Baseline Wakeboard

Shaun Murray and Greg Nelson agree that a solid foundation greatly increases a rider's learning curve. Hyperlite's Baseline is shaped specifically for creating that base and solid foundation. The Baseline has a wider overall profile built atop a continuous rocker, delivering a smooth carving board that gets more pop off the wake due to its increased surface area. The variable edge design is forgiving between the inserts but then sharpens towards the tip and tail to provide the strong edge hold necessary for generating speed into the wake. The Hyperlite Baseline is simple and both Murray and Nelson believe that less is more in their shared shaping philosophy. The center of the base is clean, clean water flow creates a smooth ride and softer landings, the dual tunnels easily allow water to enter and exit at the Baseline's tip and tail. Take it from two legends, the Baseline is the board for your wakeboard adventure.

Biolite Core: The secret recipe Hyperlite has been perfecting since day one. This core material is the gold standard in the industry and used throughout Hyperlite's line. Bio 3 is their lightest and most durable formula to date. Monocoque Construction: Integrating the top glass and the bottom glass into one. Generating a more durable board on side impacts to prevent delamination. Layered Glass: Hyperlite's fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year. Continuous Rocker: The rocker line that started it all. Speed and fluid predictable pop truly define this rocker. Designed to carry great speed into the wake with minimal drag, a Continuous rocker generates a longer trajectory with similar pop every time.

Variable Edge Design: Edge shapes that differ from tip to tail, most commonly shifting to sharper edges near tip & tail from a more forgiving, rounded or beveled shape under stance. Dual Fin Positioning: Fins closer to the tail provide more edge hold and the forward fin position delivers a looser feel. M6 Inserts: Delivers a more secure fit of the bolts to the inserts, improving bolt retention keeping binding hardware locked down. Minimum Swing Weight Profile: Thinning of the tip/tail profile for an effortless feel while spinning flat and during inverts. Two wake artists, legends & HOF inductees designing a wakeboard for all ability levels, Shaun Murray and Greg Nelson.

The Hyperlite Baseline is available in four models depending on the rider's weight range. The 131 board measures (L x W) 51.6" x 16.75" (131cm x 42.5cm), with a total surface area of 790" (2,007cm), has a tip/tail width of 11.1" (28.2cm), with an abrupt continuous 2.2" (5.6cm) rocker height, 4-fin set up of 0.8" (2cm), stance options of 21.5" to 25.5" (54.6cm to 64.77cm), a weight range of up to 155 lbs. (70.3kg), and a hole pattern offset of 6" (15.25cm). The 136 board measures (L x W) 53.5" x 17" (136cm x 43.2cm), with a total surface area of 835" (2,261cm), has a tip/tail width of 11.25" (28.58.cm), with an abrupt continuous 2.35" (6cm) rocker height, 4-fin set up of 0.8" (2cm), stance options of 22.5" to 26.5" (57.2cm to 67.3cm), a weight range of 125 lbs. to 175 lbs. (56.7 kg to 79.38kg), and a hole pattern offset of 6" (15.25cm). The 141 board measures (L x W) 55.5" x 17.2" (136cm x 43.69cm), with a total surface area of 880" (2,235cm), has a tip/tail width of 11.4" (28.96cm), with an abrupt continuous 2.5" (6.35cm) rocker height, 4-fin set up of 0.8" (2cm), stance options of 22.5" to 26.5" (57.2cm to 67.3cm), a weight range of 160 lbs. to 210 lbs. (72.57 kg to 95.25kg), and a hole pattern offset of 6" (15.25cm). The 146 board measures (L x W) 57.48" x 17.4" (146cm x 44.2cm), with a total surface area of 905" (2,299cm), has a tip/tail width of 11.5" (29.2cm), with an abrupt continuous 2.55" (6.48cm) rocker height, 4-fin set up of 0.8" (2cm), stance options of 23.5" to 26.5" (59.7cm to 67.3cm), a weight range of 190 lbs. (86.2kg), and up, and a hole pattern offset of 6" (15.25cm).