Hollis SM75 Sidemount Regulator Package

- Hollis Side-Mount SMS 75 Complete -
The Hollis Side-Mount SMS75 is an evolution from years of side-mount development, which started with the SMS100. The Hollis Side-Mount System is a product that has been copied, modified and a benchmark for technical side-mount for years. Even more popular has been the lightweight SMS50 line. These two have taken side-mount mainstream and the building blocks this new harness. While it caters more to hardcore cave divers, SMS75 was created to handle all environments. Proper trim is key in side-mount diving and the wing is designed with a trapezoid shape to promote horizontal diving with increased lift towards the hips where it's needed most, and without modification. The SMS75 will also support rear mounted tanks with cam slots for single tank and grommets at 11" (27.9cm) for banded doubles and reversible inflator positions.

The SMS75 Side-Mount System Harness comes equipped with stainless-steel D-rings on the shoulder straps with 4-pre-bent for accessory attachment. The harness has adjustable shoulder and sternum straps equipped with squeeze-style side-release buckles for easy donning and doffing. The Hollis SMS75 Harness has a stainless-steel latch-style waist buckle with adjustable crotch strap. The crotch strap is equipped with an additional stainless-steel D-rings for attachment of accessory or scooter. All hardware is manufactured from 316-marine-grade stainless-steel.

The Hollis SMS75 Side-Mount System with inflator mechanism(s) and overpressure-relief/dump valve, is a 360° elastic bungee system (removable) wing that provides 35 lbs. (15.88 kg) of lift capacity. Bladder has a centrally located inflator mechanism elbow(s) to avoid tank valve/regulator interference, lower left pull dump/overpressure relief valve and the inflator system is made from durable impact resistant plastic with a corrugated rubber hose. The internal components and inlet quick-disconnect nipple are made from chrome plated brass. The SMS75 Side-Mount System is equipped with upper and lower cam band slots for single cylinder mounting.

This bulletproof constructed wing is manufactured using 1000-Denier Cordura nylon with a polyurethane lamination outer shell & 15mm urethane internal bladder. The SMS75 Side-Mount System is streamlined designed for reduced drag and passing through confined spaces. The SMS75 Side-Mount System comes with a low pressure 3/8" threaded quick-disconnect hose, owner's manual, and rigging kit that Includes: Tank bungees, stainless-steel cam bands, stainless-steel bolt snaps and nylon line.

- Hollis DC7 500SE Regulator with Maxflex Hose -
Introducing the Hollis Gear DC7 Regulator, a high-performance system that combines an over-balanced diaphragm first stage with a servo-controlled second stage for exceptional airflow and precision. This regulator is designed to meet the strict CE standard for cold-water performance, and its environmentally sealed first stage ensures the delicate internal parts remain protected from contaminants like salt, sand, and chlorine.

The DC7 First Stage Regulator features a secondary diaphragm that completely seals the main spring cavity, providing excellent resistance to freezing or corrosion in icy or contaminated waters. Crafted from marine-grade brass with a black anodized finish, this DIN 300 bar (4350 psi) first stage offers four low-pressure (LP) and two high-pressure (HP) ports for optimal hose routing in both back-mount and side-mount configurations. Nitrox compatible up to 40%, this regulator requires less maintenance than models that expose internal mechanisms to contaminants.

The 500SE Second Stage utilizes a servo-controlled valve in a side exhaust configuration to deliver unparalleled performance for both air and tri-mix divers. Its innovative design ensures a gentle inhale activates the valve, providing increased airflow through multiple ports. This pneumatically balanced regulator features a large soft purge cover for easy clearing, a patented orthodontic mouthpiece for comfort, and can be configured for left or right positioning without any upside-down issues.

Designed with recreational divers and underwater photographers in mind, the side exhaust configuration keeps bubbles away from the face. Constructed from durable materials like Delrin plastics, rubber, stainless steel, and chrome-plated brass, the DC7 500SE Regulator comes standard with a 30-inch Maxflex hose for enhanced flexibility and reduced jaw fatigue.

- Hollis Pressure Gauge Brass Module w/o Boot -
The Hollis Brass Pressure Gauge is a solid and compact brass SPG. This rugged and easy-to-read gauge works great as a primary or even backup pressure gauge for the beginner to the most advanced technical diver. Gauge has a luminescent face for easy reading in low light or night diving conditions. Pressure gauge module has a durable tempered glass scratch resistant lens.

Gauge is oxygen cleaned with an air-spool equipped with Viton O-rings, so its oxygen compatible to 100% O2. Gauge is available imperial or metric with a pressure readout of 0 to 5,000 psi or 0 to 360 bars. The Gauge has a red color-coded readout of 0 to 700 psi (50 bars) for safety reserve air. The gauge housing is manufactured from chrome plated brass with an accurate bourdon tube mechanism. Gauge measures 2" (50.8 mm) in diameter. For gauge boot see SKU: HLSPGBO.

Warranty Information
This product has a limited warranty of 24 months.

- Hollis Low Pressure Maxflex Hose -
Improve the flexibility, lower the total weight and add extreme comfort when diving with Hollis Gear's MaxFlex Hose. The MaxFlex Hose is a lightweight, flexible, braided hose designed to outperform and outlive traditional rubber hoses. Hose has durable chrome plated corrosion resistant fittings. The first-stage end fitting has 3/8" threads for standard first stage regulator LP ports. Hose is available in multiple lengths and color choices. The hose lengths range from 22" to 36" (55.88cm to 91.44cm) with the 36" (91.44cm) hose available in black or yellow.

- Hollis Low Pressure Hose -
You have a Hollis Regulator and want the right length hose for your needs. Hollis has you covered with 6-different hose lengths of 22" (55.9cm), 30" (76.2cm), 36" (91.4cm), 40" (101.6cm), 60" (152.4cm) and 84" 213.4 cm). The 36" (91.4cm) is also available in yellow for use with an octopus regulator. Need a short hose for a safety-stop or stage bottle? Maybe your primary regulator hose seems too short or too long, Hollis has the hose you need. The Hollis Low Pressure (LP) Hose is a durable braided with rubber jacket hose design. Hose has corrosion resistant chrome plated brass fittings with a standard 3/8" male threaded end for attachment to your first stage regulators LP port.

- Hollis High Pressure Hose -
You have a Hollis Submersible Pressure Gauge (SPG) see SKU: HLSPGM and need just the right length Hose for your set-up. Do you need a short hose for use with a stage bottle or a full-length hose for your primary regulator? Whatever your need is Hollis has a hose to match those needs. Hose is available in 6" (15cm), 9" (23cm), 24" (61cm) and 28" (71cm) lengths. Hose is a durable braided with rubber jacket hose and comes equipped with corrosion resistant chrome plated brass fittings. Hose has a 7/16" male threaded end for attachment to your first stage regulators high pressure port. Hose is complete with O-rings, so it's ready for hook-up out-of-the-box.

Warranty Information
This product has a limited warranty of 12 months.
http://www.hollis.com/support/warranty
510-729-5110

- Scubapro S-Tek Bungee Regulator Necklace -
The Scubapro S-Tek Bungee Regulator Necklace is derived from technical divers that had a need to keep their back-up regulator close when needed. The regulator necklace is a great way to keep your octopus' regulator close and always ready for quick deployment. Necklace is made of quality bungee cord material. This flexible necklace large loop fits around the diver's neck and the smaller loop fits under the mouthpiece clip of any regulator second stage and when worn will keep that safe-second ready when needed.

Warranty Information
This product has a limited warranty of 12 months.
https://www.scubapro.com/scubapro-warranty
800-467-2822