


See Options
Need help? Ask our experts.
Review Summary
2019-02-12T05:18:18
I own 3 XT1/XT2 reg sets in DIN for side mount and recreational diving! All parts are interchangeable. They are tough and easy breathin'!
COURTLAND R.
2018-12-04T09:44:04
Great breather, parts are easy to find
Michael M.
2018-07-11T16:47:37
Great at a shallower depth, once you start hitting a bit deeper it feels a bit more strenuous, but was still plenty breathable at 110 feet.
Michael N.
2018-06-07T10:10:24
This is an excellent value considering all the features, Definitely one of the best. While there are many regulators that have the same features, turret, sealed, etc... It has one thing that in my mind make it stand out a little bit. It has an additional retaining ring holding the diaphragm in, allowing the front cover to be removed for cleaning/inspection with out the the innards falling out. Overall, one of the best.
Joseph A.
2017-12-10T05:02:43
I won this set up from Dive Rite at a Leisure Pro sponsored event at Dutch Springs. I recently Nov 2017 took this regulator set with me to the Cayman Island to try it out. Pros: Great Price MSRP is $629. Mine was free. Breathes great and effortlessly. On a swim through, we exited on a wall at 113' and I needed to open up the adjustment control valve knob to increase flow Nitrox. Cons: Weight. A bit heavy for travel. Made in China so do not expect the same quality as Atomic, Mares, and Scubapro. Have the unit serviced only by a Dive Rite service center. I have 10 open water dives and 4 quarry dives on this set. All warm water dives. Would I recommend this set up for cold water? No The XT AOW Regulator is worn a bit differently than standard recreational regulators, the XT AOW Regulator places the primary regulator on a longer hose that is stowed neatly under the divers arm. The primary regulator is typically the regulator an out of air diver will reach for in an emergency and the longer hose allows both divers comfort during descent. The secondary second stage is stowed on a necklace where it can be easily reached by the donating diver. XT1 First Stage XT2 Second Stage, Black cover XT2 Second Stage, Yellow cover 40-inch LP hose 22-inch LP hose Right angle regulator adapter Regulator necklace 2-inch SPG with 24-inch hose Small swivel bolt snap Hose clip retainer Reg bag
MICHAEL S.
2016-05-06T21:38:48
its a simple design, might even share parts and design with HOG, but it works, and works well. it can be used in cold or warm water, it has a control valve and good bang for the buck. when buying make sure authorized dealer/repairer near by. you want someone who knows what they are doing and has the parts, i found those things to be lacking in my area leading to long and tedious repair times. Also had it break due to inexperience and negligence when repair was attempted by a non dive rite knowledgeable tech. its made of plastic not heavy metals, cheaper to make and break. Easy to use and works well. good reg and not paying arm and leg for features like control valve and ability to work in all waters cold and warm.
Przemek J.
Pneumatically Balanced Diaphragm
Five 3/8-24 UNF
Two 7/16-20 UNF/ISO263)
Yes, Venturi Dive/Pre-Dive Switch
Yes, Up to 40% Oxygen
Pneumatically Balanced Downstream Valve
First Stage:
Black Chrome Plated Marine Brass
Stainless Steel
Rubber
Second Stage:
Case & Cover: ABS Plastic
Internal Components: Teflon Coated Chromed Brass & Stainless Steel
3/8"
28" (71cm)
8796420027780
Dive Rite Regulators
By COURTLAND R.
I own 3 XT1/XT2 reg sets in DIN for side mount and recreational diving! All parts are interchangeable. They are tough and easy breathin'!
Easy Breather
By Michael M.
Great breather, parts are easy to find
Dive Rite's XT Regulator introduces a new era of regulator performance with its advanced, patented design, earning high praise from Mike Ward of Dive Lab. With a work of breathing under 1.0 J/l, it competes with top regulators in the market. The XT1 first-stage regulator features five 3/8" threaded low-pressure ports for optimal hose routing, catering to back mount technical divers seeking a streamlined setup. One top turret LP port is designed for safety and convenience, with a slightly convex and slotted surface to accommodate an 11/16" wrench. The regulator also has two high-pressure ports angled at 90 degrees from the DIN/Yoke fitting for perfect hose routing.
Pending CE EN 250 certification for cold water use, the balanced diaphragm, black chrome-plated marine brass first stage is environmentally sealed. This prevents internal parts from being exposed to contaminants like salt, sand, or chlorine, which can cause corrosion and reduce performance. The XT1's secondary environmental diaphragm membrane seals the spring chamber, offering additional corrosion resistance and cold water protection. The pneumatically balanced design ensures consistent gas pressure regardless of depth or tank pressure.
The second stage regulator features an ergonomic dive/pre-dive Venturi lever, easily adjustable with gloves, and prevents free flow. It uses a pneumatically balanced downstream valve for better performance at depth. The durable, impact-resistant ABS plastic housing and cover are paired with a chromed brass adjustment knob and barrel tube. Stainless-steel spring and lever, as well as Teflon-coated internal parts, make it cold-water ready. The XT Regulator comes with a 28" low-pressure hose, is Nitrox ready, and includes an owner's manual.
http://www.diverite.com/service/warrantypolicy/
800-495-1046
Best Price Guaranteed + 5% OFF
Submit a price match
30/90 FREE Returns
Worry-free returns
Sell your Used Gear
Get started in 3 easy steps