Atomic Aquatics Safe Second Inflator (SS1), Titanium

When you learned to dive, you were taught specific skills to make you safe and comfortable underwater and at the surface. One of those skills was Buoyancy Control. Once you start diving for fun you use your BCD constantly thru-out the dive. Your octopus or alternate air source on the other hand is never used unless there is an emergency out of air situation. Reacting properly in an out of air emergency can make the difference between a safe dive and a tragedy. If your Octopus & BCD Inflator Device are combined, you will always know where to find it in an emergency.

The SS1 takes the concept to new levels of convenience, reliability & performance. It contains a high flow 2'nd stage that performs like many high performances second stages. It will deliver air to a diver at depth with minimal effort. It is very stable and not prone to unnecessary free-flow or leakage from water movement while swimming, or during entries or exits. The inflator/deflator is easy to operate with soft-surfaced buttons placed where they can be easily operated with one hand.

The SS1 features a quick disconnect not only on the low-pressure hose, but the BCD hose as well. The adapters that fit the SS1 to the BCD are connected to the SS1 with a threaded collar that can be easily unscrewed to detach it completely from the BCD. Now you can carry or store the SS1 with your primary regulator and gauges (patent pending).

The SS1 combines the functions of the inflator and octopus regulator into a single unit. This reduces the overall bulk and weight of your dive gear; eliminates hoses, and places your back up regulator in a fixed, familiar location. This time proven concept is a convenient and efficient alternative to the dedicated octopus second stage. Reduce your rig by one hose with the high- performance Atomic Aquatics SS1. The high-flow, low-pressure disconnect is interchangeable with many other models yet smaller size and lighter in weight. Large oversized and ergonomically shaped buttons are easy to find for pneumatic or oral inflation and deflation. They are easy to distinguish and faced with soft tactile rubber surfaces.

The elliptically shaped body of the SS1 lies flat against the BCD keeping it out-of-the-way and reducing drag. Seat wear is the first cause of regulator leaks and performance degradation. The stainless steel dynamic orifice is pressure energized and only- contacts the rubber seat when in use. Equipped with a titanium lever this high strength metal part is the link to your air supply and will never fail due to rust or corrosion. The integrated purge cover is a one-piece flexible cover allows purge of the regulator when depressed anywhere on the cover surface.

The SS1 has titanium inflation/deflation stem, demand valve body, stainless steel orifice and springs and a titanium and 316-grade stainless steel quick disconnect. The mouthpiece and diaphragm are silicone rubber and the SS1 body is manufactured from fiberglass reinforced nylon. The SS1 is a dependable downstream demand valve design. The SS1 weighs 6.3 oz. (180 g) without the hose and the hose also weighs 6.7 oz. (190 g) and measures 28" (71cm) in length.