Used Zeagle Octo-Z II Yellow

SKU: US31204

This item is no longer available.

Here are Similar Octopus:

Recommended Items

Overview
Compare
Specs
Q&A

Questions & Answers

JOSEPH E : In years past, this item used an inflator hose with the same size coupling as the original bcd inflator, but more recent models require the larger, bulkier coupling... why the change? and can it be purchased with the smaller male attachment, like it used to be?JOE S : This requires a larger inflator because it is a breathable gas. It has always had the larger connection as long as I can remember. you should not Downgrade this because it may not deliver enough gas to breath in an emergency.
matt h : compatable with my Zeagle Scout?ANTHONY G : Yes, its just a standard hose fitting.Kayla O : should be, to check see if the existing inflater unscrews by hand then octo-z just screws on to the hose
Shopper : Why Did You Choose This?BERIT C : free with BCD purchaseTRAVIS B : Previous experience with productJIM B : I know it very well.PHILIP P : I own a Zeagle BCD with an integrated 2nd stage. The 2nd stage is getting old and needs to be replaced.WILLIAM L : To put on my new Zeagle Covert to complete my carry on dive bag. Simple to install as it just screws on the inflator hose.

Zeagle Octo-Z II Yellow Item# 31204 Specifications

  • 2'nd Stage Type

    Downstream Demand Valve

  • Materials

    Flexible & Ridged Thermoplastics
    Elastomeric Polymers & Silicone Rubber
    Zirconium Plated Inlet Tube
    O-Rings Buna-N

  • Hose Thread

    3/8"

  • Hose Length

    27" (69cm)

  • Total Weight

    8 oz. (213 g) w/o Hose

About Zeagle Octo-Z II Yellow Item# 31204

Zeagle's regulators are US made, built under strict controls for quality in our own factory, using state of the art equipment and procedures. Your regulator is one of your most important pieces of gear. No matter what kind of diving you do, you can do it better with Zeagle.

The Octo-Z II Inflator replaces the conventional BC power inflator and second stage octopus by combining the functions of both into a single unit. When you're taught how to dive you are given practice in buoyancy control more than any other skill. Once you start to dive every time you go underwater, fin the reef, or surface you use buoyancy control. All this time your octopus second stage regulator hangs un-used and out of mind.

When a real life out-of-air situation occurs, the stress and anxiety mounts, and you find yourself fumbling for a piece of equipment you never use the Octopus! Combining your inflator devise (that you use on every dive) with your Octopus Regulator assures your ability to react properly when an out-of-air emergency occurs. Be a safe diver with the Octo-Z Breathable Inflator.

The Octo-Z II is a dependable downstream demand valve design breathable inflator. The Octo-Z II has a balanced inflator valve design and is manufactured from brass, flexible and ridged thermoplastics, elastomeric polymers and silicone rubber. The breathable inflator weighs 8 oz. (213 g) without the hose, providing a lightweight and compact alternative to having both a standard inflator mechanism and a separate octopus regulator.

The high-flow inflator hose is 27" (69cm) in length with 3/8" threads. The Octo-Z II is also equipped with a threaded coupling that allows you to attach the end of the BC corrugated hose to a garden hose for easy and effective rinsing of the BCD's air bladder. This feature also allows you to disconnect the Octo-Z II for storage with your primary regulator. The combining of the alternate air source and inflator mechanism also eliminates a hose and streamlines your profile when diving. The Octo-Z II comes with a comprehensive owner's manual.