Scuba Diving Tanks & Scuba Diving Valves
Save 5% Every Day† with the Scuba.com Edge Card. Learn More
Catalina 63 Cubic Foot Aluminum Tank with Pro Valve
SKU: AQUTA63
(2)- 63 cu ft Aluminum Tank: Reliable scuba gear.
- 3000 PSI Catalina Tank: Ensures ample air supply.
- Convertible Valve: Adaptable scuba tank valve type.
- Nitrox Ready: Up to 40% oxygen compatibility.
- Durable Aluminum Tank: Lightweight, 26.9 lbs empty.
- Scuba Tank: Negative buoyancy for underwater stability.
Aqua Foam Tank Holder for 2 to 3 Cylinders
SKU: AQUFTH2MFR: TA22
(5)- Secure scuba cylinder transport with EVA flex foam.
- Protect tanks from corrosion in car, truck, or boat.
- Reliable tank holder fits up to 3 stacked cylinders.
- Durable scuba tank accessory ensures safe transport.
- Easy to use: Secures 2-3 cylinders effortlessly.
- Poly line adds extra durability for scuba gear.
Highland by XS Scuba Stainless Steel Cylinder Bands
SKU: XSSSSTB
(1)- Durable stainless steel cylinder bands by XS Scuba.
- Ensures reliable tank security for scuba diving gear.
- Fusion welded bands protect cylinder finish.
- 10-Gauge steel plates add strength and durability.
- Passivated & polished for corrosion resistance.
- Compatible with standard scuba tanks and valves.
Sherwood High Pressure Panel Line Valve with Bleed
SKU: SWDPLVBMFR: HLV-3
(1)- Sherwood valve: Reliable high-pressure gas control.
- Forged brass valve body ensures durability, safety.
- 6,000 psi (414 bar) working pressure scuba valve.
- Bleed valve offers ease of use, controlled venting.
- Tested to 24,000 psi: Maximum safety, reliability.
- High flow rate valve for efficient cylinder fills.
Roll-Control 48" (122 cm) Aluminum Track Railing (TA-81)
SKU: RCSTA81MFR: TA81 7065
(15)- Durable anodized aluminum track railing system.
- Ensures reliable mounting for dive tank accessories.
- Compatible with Roll-Control tank accessories.
- Simplifies tank handling; easy to use design.
- Corrosion-resistant for lasting performance.
- 48" (122cm) aluminum track for secure setup.
XS Scuba Plug Set Delrin
SKU: XSSPSDMFR: AC914
(1)- Delrin plugs protect regulator inlet fitting.
- 9/16-18 threads ensure compatibility, positive seal.
- Machined Delrin plastic offers corrosion resistance.
- LP port plugs for low-pressure hose protection.
- Durable XS Scuba plugs extend gear lifespan.
- Easy grip design for secure, simple installation.
Aqua DIN Valve Male Plug
SKU: AQUDDPMFR: A140
(8)- Delrin plastic ensures ultimate corrosion resistance.
- Secure seal with included O-ring for DIN valve plug.
- DIN valve male plug fits standard scuba tank valves.
- Durable design with easy grip for simple operation.
- High-pressure rated plug for reliable tank protection.
- Attachment lanyard keeps valve plug secure and handy.
XS Scuba Combo Filler
SKU: XSSCFMFR: AC975
(1)- XS Scuba Combo Filler: Durable chromed brass build.
- LP design ensures safe use below 200 psi (13.79 bars).
- Quick connect feature for ease of use and efficiency.
- Inflate tubes with Schrader valves using this combo filler.
- Reliable tank accessory for stem valve inflation needs.
- Corrosion-resistant materials extend product lifespan.
Tank to Tank Equalizer with Pressure Gauge
SKU: AQUTT
(11)- Equalize scuba tanks safely with this HP equalizer.
- Marine-grade brass fittings ensure lasting durability.
- 34" tank equalizer for easy, reliable air transfer.
- Pressure gauge reads up to 5000 psi/350 bars.
- Compatible with HP scuba tanks for air equalization.
- One-year warranty included for peace of mind.
Faber Low Pressure Steel Tank
SKU: FBRLP
(18)- Durable steel tank: Chromium Molybdenum build.
- Multiple sizes: 50CF, 85CF, 95CF, 108CF & 120CF tanks.
- Reliable valve: Convertible, marine-grade chromed brass.
- Low pressure steel tank: 2640 psi, 10% overfill.
- Nitrox ready: Up to 40% for enriched air fills.
- Corrosion resistance: Zinc, epoxy & polyurethane.
In Stock
Blue Steel Inline Re-Breather Valve
SKU: FBRRV
(1)- Chrome plated brass valve ensures durability.
- DIN 200 bar outlet valve for reliable performance.
- Oxygen compatible valve; Nitrox ready for safety.
- 3/4" NPSM thread size valve offers ease of use.
- Blue Steel re-breather valve with high flow rate.
- Corrosion-resistant valve for extended scuba use.
XS Scuba Tank Banger
SKU: XSSTKBGMFR: AC450
(2)- XS Scuba Tank Banger: Loud underwater signaling.
- Durable tank banger for clear communication.
- Easy hand-pull activation; simple tank accessory.
- Enhances scuba diving safety with clear signals.
- Corrosion-resistant materials ensure long life.
- Compact & portable tank accessory for any dive.
Spare-Air Deluxe Holster
SKU: SXLRPMFR: 973
(10)- Secure Spare Air holster with durable fabric build.
- Quick-release buckles ensure fast tank deployment.
- Hook & loop fastener provides a snug, safe fit.
- Compatible with most Spare Air tank sizes.
- Corrosion-resistant materials for lasting use.
- Easy-to-use design for swift access underwater.
Catalina 53 Cubic Foot Aluminum Tank with Pro Valve
SKU: AQUTA53BRMFR: AC0053BRSSVC48P
(2)- Catalina 53 cu ft Aluminum Tank: Reliable scuba gear.
- 3000 PSI scuba tank with convertible pro valve included.
- Lightweight aluminum tank: Only 25.1 lbs for easy diving.
- Nitrox ready: Up to 40% oxygen compatibility ensured.
- Durable aluminum scuba tank with lifetime limited warranty.
- Negative buoyancy: -3.8 lbs when full for stable dives.
Innovative Scuba Rubber Dust Cap
SKU: AQUSRDCMFR: RB1212
(3)- Protect regulator with durable rubber dust cap.
- Yoke regulator dust cap: universal compatibility.
- Shields first stage from corrosion and damage.
- Easy installation: loop attaches under yoke screw.
- Ensures regulator safety; extends equipment life.
- Affordable scuba gear: essential tank accessory.
Hollis Double Mounting Plates (set of two)
SKU: HLSDMPMFR: 208.1034
(1)- Durable stainless steel for twin cylinder setups.
- Enhances scuba tank stability and corrosion resistance.
- Compatible with Hollis backplates for secure mounting.
- Ensures reliable scuba gear performance underwater.
- Designed for industry-standard tank band compatibility.
- Provides safe and easy double tank mounting solution.
Faber High Pressure Steel Tank
SKU: FBRHP
(73)- Durable steel tank: High-pressure, up to 3442 psi.
- Multiple sizes: 23 cu ft to 149 cu ft steel tank options.
- Convertible valve: Yoke/DIN valve, Nitrox ready to 40%.
- Corrosion-resistant: Zinc-sprayed, epoxy-coated steel tank.
- Chrome-Moly steel: Deep-drawn for superior tank strength.
- Includes tank boot: Protect your Faber steel scuba tank.
XS Scuba Deluxe K Valve
SKU: XSSDKVMFR: VX100-30A-VI
(4)- Durable chromed brass K valve for scuba tanks.
- Reliable yoke valve ensures secure tank connection.
- 3/4"-14 NPSM thread fits standard scuba cylinders.
- Teflon-coated brass seat enhances valve longevity.
- XS Scuba deluxe K valve with dip tube included.
- Easy to use valve for safe & controlled air flow.
XS Scuba, Paint Ball Quick Disconnect Adapter
SKU: XSSPBQDAMFR: AC392
(1)- HP Quick Disconnect: Durable stainless steel build.
- 1/4" NPT Male Threads: Standard, easy tank connection.
- Paint Ball QD Adapter: Spare or replacement part.
- Stainless Steel Adapter: Corrosion-resistant material.
- Tank Accessory: Ensures safe, reliable performance.
- XS Scuba Adapter: High-pressure system compatible.
Faber 23 HP Steel Tank with Inline Re-Breather Valve
SKU: PCK23RV
(1)- High-Pressure Steel Tank: 3442 psi (237 bar) capacity.
- 23 cu ft Faber Tank: Compact, lightweight design at 8.6 lbs.
- Durable Steel Tank: Corrosion-resistant, zinc-sprayed finish.
- Reliable Valve: Marine-grade chromed brass construction.
- Nitrox Ready Tank: Up to 40% for enriched air diving.
- Compact Scuba Tank: 3.94" diameter, 19.5" height.
XS Scuba Standard Fill Checker
SKU: XSSTPCMFR: AC360
(1)- Accurately check scuba tank pressures to 5000 psi.
- Chrome-plated brass ensures corrosion resistance.
- Stainless steel gauge case offers lasting durability.
- Yoke fitting provides secure, easy valve connection.
- Marine-grade materials enhance scuba gear safety.
- Integrated bleed valve allows for safe pressure release.
XS Scuba, Scuba to Paint Ball Filler Adapter
SKU: XSSPBFMFR: AC390
(2)- Durable chromed brass adapter ensures long life.
- High-pressure scuba to paintball fill adapter, 5000 PSI.
- Quick connect feature offers ease of use, HP or LP.
- Stainless steel build resists corrosion effectively.
- Certified safe scuba tank to paintball adapter kit.
- Compatible with standard scuba tank valves easily.
XS Scuba Standard Cam Bands
SKU: XSSTB
(21)- Secure your cylinder with durable nylon cam bands.
- Stainless steel buckle ensures reliable tank attachment.
- Compatible with standard & pony scuba cylinder diameters.
- High-strength webbing resists corrosion in saltwater.
- Hook & loop fastener offers ease of use and security.
- Essential scuba gear accessory for safe tank handling.
GMC SCBA to Scuba Adapter
SKU: AQU45010MFR: 45010
(18)- Durable chromed brass adapter ensures long life.
- Converts SCBA tanks to standard scuba yoke valves.
- Rated to 3200 psi for high-pressure scuba tanks.
- CGA 346/347 adapter fits fill station whips easily.
- Enhances scuba tank compatibility and versatility.
- Ensures safe and reliable scuba tank connections.