Scuba Halo Onyx Value Pro Package

- Zeagle Halo BCD -
Designed for the serious recreational diver who is looking for a fully-featured BC the Zeagle Halo unisex has arrived. The world's first and only jacket style BC with the patented Ripcord System - the easiest and most reliable weight release system and Personal Fit System (PFS) in the shoulders for versatility and comfort. The PFS allows for a Custom-Fit and lets you change out specific sections of the BC.This fully featured BC comes with an adjustable and compensating cummerbund, two large zippered accessory pockets and seven stainless steel D-rings for all your accessories comprised of 5 x 1.5" (3.8cm) and 2 x 1" (1.54cm) D-rings. Built to last the Halo is made from 1000 denier with a urethane bladder material, radio frequency (RF) welded seams and the pocket, shoulder, harness, cummerbund mix of 1680D heavy duty, and 420/polyurethane (PU) material.

The new and improved Ripcord Weight Release System with new ergonomic handle design has a 20 lbs (9kg) maximum releasable weight capacity with custom made weight pouches and 10 lbs (4.54kg) non-releasable trim weight pockets. Dual knife mount positioning and dual retractor mount (left and right) pocket. Adjustable tank band and tank positioning strap for easy attachment to the tank and a carry handle for convenient transport. Buoyancy control is made easy with the right shoulder and rear right overpressure relief/pull dump valves and Zeagle's BX Power Inflator System with 3/8" threaded quick-disconnect low pressure hose. The BX power inflator makes preventative maintenance easy with its threaded lower mechanism that allows the attachment of a garden hose for fast and easy inner bladder rinsing. The BX is also connected to a pull dump valve for rapid deflation.

The Halo is equipped with a comfort harness with lumbar support and adjustable inflator retainer. The BCD provides 32 lbs (14.5kg) of lift and has a dry weight of 8.2 lbs (3.76kg). Getting the perfect fit is enhanced with the BCD's torso adjustable shoulder straps, adjustable sternum and waist straps. All straps are equipped with squeeze-style side-release buckles for quick and easy donning and doffing. The package is made in the USA.


- Zeagle Envoy II Yoke Regulator -
The Zeagle Envoy II Yoke stands out in its price range, boasting perfect simulator scores even under demanding conditions. With exceptional in-water performance, Zeagle's US-made regulators are crafted with meticulous quality control in their own factory. Enhance your diving experience with Zeagle, one of the most vital pieces of gear in your arsenal.

The Envoy II first stage regulator features an internal structure that enables direct airflow, providing remarkable performance. Its conical precision stainless steel high-pressure valve and advanced polymer seat ensure enhanced reliability, service life, and responsiveness at all breathing rates. The balanced diaphragm design offers years of corrosion-free service with high-performance porting.

The chrome-plated marine brass first stage regulator boasts a balanced diaphragm design, inherently environmentally sealed. This protects delicate internal parts from contaminants like salt, sand, chlorine, and pool acids that can cause corrosion and mineral deposits, affecting performance. The first stage regulator houses 5 low-pressure (LP) ports with 3/8"-24 UNF thread and 2 high-pressure (HP) ports with 7/16"-20 UNF thread.

- Zeagle Envoy II Octopus -
The economical Zeagle Envoy II Octopus is the same internally as the ZX 2nd Stage, but is more compact and lighter because it does not have the adjustment knob or the heat exchanger. The Envoy Octopus has a venturi control lever that allows the diver to set the octopus 2nd stage in the pre-dive position until needed. This is very important in octopus regulators, since the pre-dive position is much more resistant to venture free flows that can sometimes result in significant air loss during a dive. The makes the Envoy Octopus a simple, lightweight choice for diving.

The Envoy Octopus has a dependable downstream demand valve design for easy breathing in an out-of-air situation. The Octopus weighs 6.6 oz. (187 g) without the hose and is made from brass, flexible and ridged thermoplastics, elastomeric polymers and silicone rubber. The Envoy Octopus comes with a yellow cover for easy identification, 36" (91.4cm) 3/8" threaded hose and owner's manual.

Warranty Information
This product has a limited lifetime warranty.
https://www.zeagle.com/support/warranty
813-782-5568

- Mares Puck Pro+ Wrist Computer -
When Mares introduced the Puck Dive Computer on the market in 2008, it sent a shockwave rippling through the industry: a super intuitive, easy-to-use, and full featured RGBM Nitrox computer at an extremely competitive price. Now Mares is doing it again. Though improving on the original concept was not easy, they did so by installing a metal button for greater durability, provide a 3-level salinity function for fresh, salt and aquarium diving and an upgraded interface. Keeping all the best from the Puck Pro the Puck Pro+ has the same larger display in a slimmer design, upgradeable firmware and multi-gas capability. With all the bells-and-whistles, with no unnecessary frills, the Puck Pro+ Wrist Computer is what you're looking for. The Puck Pro+ is the computer that can accompany you through years and years of diving adventures.

The Puck Pro+ Wrist Computer uses Mares-Wienke RGBM (Reduced Gradient Bubbles Model) Algorithm. The RGBM considers the phenomenon of micro-bubbles to prevent their formation. In over 10,000 real dives monitored by Dr. Bruce Wienke in the Los Alamos laboratories, the formation of micro-bubbles has been studied and evaluated to better understand the mechanism behind how micro-bubbles are formed during a dive. Today it is the most evolved algorithm for reducing the formation of micro-bubbles without compromising dive times.

The easy access metal push button allows the diver to operate the computer in all conditions, even when wearing thick gloves. Navigating through the computer programs is extremely simple and very intuitive. There are three special function modes of Air, Nitrox and Bottom Time. The Puck Pro Computer has a maximum depth display of 492' (150m), a memory capacity of 36-hours, runs on a user replaceable 3 volt CR2450 lithium-ion battery, is equipped with a power indicator, back lighting for low light conditions, has a plan mode display, can be used in both imperial or metric units, fresh or seawater settings, residual nitrogen reset, option to exclude audible alarms and uncontrolled ascents", has an ascent rate indicators and is fully altitude adjustable to 12,100' (3,700m). The Puck Pro+ also has a watch, stopwatch, date and temperature functions, Quartz clock movement can be set in a 12 or 24-hour format. The Puck has an optional USB interface for logging dives on your PC, (SKU: MRSPCNMW) PC interface, a 35-hour logbook including dive profile graphs at 5-second sampling rate.

The Puck Pro+ knows that not all of us who dive are young and in peak condition, it address this with Precautionary Program Settings that allow individual adjustment to more conservative dive profiles if needed. When you do multi-level, multiple dives during a single-day or multiple dives over several days you can choose different setting levels to adjust your computer to a more conservative dive profile.

The Puck Pro+ has superior display readability. To offer an easy-to-read display Mares produced a wide computer mineral glass display, with intense backlighting and high contrast. The computer featuring illuminated, oversized digits with special attention paid to maximize the viewing angle, to eliminate angular distortion and to always grant the best readability. The Puck Pro+ Computer comes with a durable rubber wrist strap and a comprehensive owner's manual. For download interface see Mares PC Interface for Dive Link 2 (SKU: MRSPCDL2).

Warranty Information
This product has a limited warranty of 24 months.
https://www.mares.com/en_US/warranty
800-874-3236

- Blue Reef Nano Pressure Gauge with Hose -
Dive Smarter with the Blue Reef Nano Pressure Gauge Dual Scale SPG and HP Hose
Discover the ultimate in diving convenience with this Nano Dual Scale SPG. This exceptionally designed submersible pressure gauge combines top-tier functionality with a sleek, minimalist design, ensuring that you have a reliable, precise companion for your underwater adventures. Engineered with a nickel-plated brass body and a luminescent, easy-to-read dial, this gauge is crafted to provide unparalleled visibility and enduring performance, dive after dive.

Designed for Peak Performance
Optimize your diving experience with this Nano SPG. This gauge is significantly lighter and more compact than conventional models, designed specifically for divers who value a streamlined, efficient setup. Equipped with a copper beryllium spiral for exact precision and a polycarbonate window to withstand rigorous diving conditions, it also features an ergonomic shape and a soft yet grippy cover that offers both comfort and superior impact resistance.

Manufactured in Italy and certified according to EN250:2014 & European Regulation 2016/425.

Warranty Information
This product has a limited warranty of 24 months.
https://www.scuba.com/g/faq
800-347-2822