XS Scuba MultiMax Breathable Inflator

When you're taught how to dive you are given practice in buoyancy control more than any other skill. Once you start to dive every time you go underwater, fin the reef, or surface you use buoyancy control. All this time your octopus second stage regulator hangs un-used and out of mind. When a real life out-of-air situation occurs, the stress and anxiety mounts, and you find yourself fumbling for a piece of equipment you never use the Octopus!

The MultiMax adds convenience, efficiency and safety to your dive. By combining an alternate air source with an inflator, there is one less hose coming off the first stage. Gone are the days where the octopus is dragging in the sand or across fragile coral. The breathable MultiMax is located where your BC inflator resides. This makes it easy to find since you operate your inflator many times throughout each dive. In an out-of-air situation, your hand knows right where to go. Combining your inflator device (that you use on every dive) with your octopus regulator assures your ability to react properly when an out-of-air emergency occurs.

Large, color differentiated buttons are easy-to-use, even with thick gloves. The soft-touch purge cover is located on the bottom of the unit so it will not be affected by strong currents. Easy-connect, push-on hose connector is very glove friendly. Downstream demand valve with venturi assist for performance and reliability. The MultiMax case is made from a durable impact resistant fiberglass reinforced nylon material, the diaphragm and exhaust vale are silicone rubber, the demand valve is chrome-plated brass with a stainless-steel spring. Custom 26" (66cm) Miflex regulator hose allows maximum flow to the MultiMax. Includes inlet protective cap to keep out water and particulates. The MultiMax has successfully passed the certification tests required by EN250:2014 to an auxiliary emergency breathing device integrated with a buoyancy inflation system. The regulator/inflator w/o hose weighs 5.3 oz. (150 g) is compatible with corrugated hose connections measuring 0.75" (19mm) ID and comes with an owner's manual.