Top Rated Gear

Highland by XS Scuba Universal Spring Fin Straps 8"

SKU: XSSFUSS8 MFR: HL708
$91.95
$101.00
Save: $9.05 (9%)

Key Features

  • Upgrade your scuba fins with these durable XS Scuba spring straps for secure performance.
  • Enjoy easy fin donning and doffing with these universal spring straps; a must-have scuba accessory.
  • These stainless steel spring fin straps resist corrosion, ensuring longevity in saltwater dives.
  • Three buckle styles included for compatibility with various scuba fins, enhancing your dive gear.
  • Delrin spring ends and nylon cover provide comfort and durability for your scuba diving adventures.
  • Get a custom fit with multiple sizes available for these spring straps, optimizing your fin propulsion.
See More Product Details
Overview
Compare
Specs
Q&A

Questions & Answers

Michael K : Has anyone used these on dacor turboflex fins?darrick c : Hello Michael, I have not hear of anyone using this with that Dacor fin. If the fin post on your Dacor is a pin style. This would work for you fin.
Jehan P : are the straps sold as a single or a pair? is the quoted price for a pair?Mario C : this is item is a pair
NOEL W : What size bolts are these to attach the strap to the the fin? I have lost one of the nuts...DENNIS B : I also own these. And while I don’t know the answer, I am sure that if you take the bolt (or the other nut) to any hardware store, they will have a replacement! Just make sure you ask for stainless steel!!RON S : Take the bolt to any hardware store ever, and use the thread sizing tool. Don’t make the Internet do your work for you bro.BURTON D : The bolts are 3mm - .60 nylok
Shopper : I wear a size 13 bootie, and also size 13 shoes. Should I get the 12"?JUAN A Z : 12" would probably work. But what you should do is measure the size with a tape measure from the post to post of the flipper around the back of your heal. The measured distance is what you should have on the strap. The strap will give something like about one inch or more. I would buy on the lower measurement - 12" instead of 14" in your case. The strap will work properly even if it does not hold on to your heal somewhat loose.SAMANTHA F : I used the 10 inch with a size 11-12 boot on my drysuit. I think I still have plenty of room for another inch in the stretch. You could get the 12 and check it before installing. You do not want it too lose.....FRANK C : The size strap to use will depend on the brand of your fin as well as the size of your fin. I think I put the 12 inch straps on my Scuba Pro Jet Fins. They are 2XL and they worked just fine for me. I wear a size 10 shoe and my boots are integrated in to my dry suit. Another thing you can do is put on your bootie just like you were diving. Then, measure from fin mount to fin mount. Measure across the achilles tendon just where you would want your strap to fit. Round up or down to the nearest strap size. I believe when they say it's a 12 inch strap that counts the mounts. Hope that helps out a little.
ROBERT L F : Is this the new XS Scuba Universal Spring Fin Strap that has the pull-tab in the center?NEIL H : Mine did when I bought them but you don't need them. The newest version may not have them.TROY T : Yes, the ones I received had the pull tab in the center.CHARLES S : Yes

Reviews about this item

Review Summary

2023-04-11T15:04:48

Rated 3 out of 5

Sturdy fin straps but not the right size

The fin straps were easy to attach to my fins. They appear very well made and durable. But I could not give them 5 stars because they seem to be different lengths. The strap I have on my right fin keeps coming off my bootie heel during the dive while the left one stays put! I was hoping these would make my fins easier to put on in the skiff when diving from live aboard dive boats. They are easier to get on and much less likely to break than my previous rubber straps. But I already bought the smallest size available in this style and I tightened them up as short as possible but the right strap still comes off my heel. I am considering whether to switch to a new fin strap, go back to the rubber ones or buy new booties that are slightly larger so the strap would be more likely to stay on my heels. These straps were fairly expensive and I am very sad that they don't stay on. I was so sure they would be perfect due to the length I ordered.

ELIZABETH B.

2022-08-03T11:32:32

Rated 5 out of 5

great

nice straps

Richard R.

2021-12-13T19:00:00

Rated 5 out of 5

Beautiful and Functional!!

I got these fins for shore diving and they are perfect! They fit well and slide on and off easily.

MariD

2021-04-20T08:59:34

Rated 4 out of 5

Pleased

Performance was better than the rubber strap.

William I.

2019-04-14T20:00:00

Rated 5 out of 5

Highland Technical Spring Straps Review - Scuba Gear Reviews

These replaced the original straps on the scubapro split fence . The loop split . These have a pool tab..they slid off the boot easily and our easy to adjust. there is one fine tune hole for adjusting the bracket and length. Good value and good product.

ConradW

2018-11-18T02:59:02

Rated 5 out of 5

Worked out good thanks to more detailed product description and more sizes.

There are cheaper spring straps available but I needed the accurate description they provided about the size. I picked the smallest because I have long skinny feet that slide way down into my Mares fins. I am diving them now in Bali - rocky shore entries. They fit and I am glad I read the directions because they lock onto Mares post fins with the addition of another screw. I don’t see this available with other spring straps. I do wish they had the rubber heal and hand hold of some other brands but these are working good for me.

JASON B.

2018-01-17T04:27:51

Rated 5 out of 5

These things are great

SCan’t tell you how much easier these thing make getting in and out of my fins. As a DM I’m in and out a lot. I will never have a pair of fins without them in the future.

BRUCE T.

2015-06-15T20:00:00

Rated 5 out of 5

Very Well made!

Super easy to install and will most likely outlast my fins for sure. They were slightly too long (should of ordered the 8") but with the proper tools and patience they were easily modified down to 9" Which fits nice and snug.

Speedy

2014-03-02T19:00:00

Rated 4 out of 5

Quality, depedability, and style

Solid construction and easy to install. I put them on my Aqualung Blades and they fit perfect.

Mud d.

2013-08-15T20:00:00

Rated 5 out of 5

good product

They work great, its good to not have to worry about a fin strap breaking when you are 40 miles offshore. makes it quick and easy to pop your fins on and off. CC

cc

2013-05-29T20:00:00

Rated 5 out of 5

The Best Choice for Jet Fins

Well made, easy to install. The full pin attachment feels more secure than other designs. The half size adjustment is valuable when you are borderline on the size and need to account for a boot or boots of varying thickness. For classic fins like Jets and Rockets these are a must. Note that while these are easy to install there is some work involved in getting the standard buckles removed from the Jet Fins. Having a pair of End Cutters to clip the pins (wear safety glasses) makes this much easier.

DOCRADLEY

2012-07-12T20:00:00

Rated 5 out of 5

Works great

Great product. Happy to get rid of those rubber straps!

Tiki_bill

2012-05-07T20:00:00

Rated 4 out of 5

Well made

The tab to pull the springs on is way too short. I had to make a longer tab. Otherwise, the product is excellent.

DD

2012-02-13T19:00:00

Rated 5 out of 5

the only spring strap to use

cut off the silly little tabs, and use a drop of lock-tite on the threads

Maxim

2012-01-31T19:00:00

Rated 5 out of 5

The best choice

Comfortable and reliable

Paul

2012-01-24T19:00:00

Rated 5 out of 5

excellent upgrade from the original

installation was quick and easy. I followed the size guide exactly and found the perfect match. these are great

cover120493

2011-09-24T20:00:00

Rated 4 out of 5

Measure first

I wear size 10 neoprene aqualung 5m so i use xl OMS or Jet Fin and need to use 8" xs springs. From post to post my fins mesure 13" and the 8" is actually 10" from post to post. So very snug fit.

Vino

2011-08-13T20:00:00

Rated 4 out of 5

Recommended

I used the large post buckles with Cressi Pro-Light fins and had to secure them with cable tie for fear of the straps detaching from the fins. Perhaps the straps work better with other model fins

South G.

2011-04-06T20:00:00

Rated 5 out of 5

Great buy

.

Dir09

2010-05-10T20:00:00

Rated 5 out of 5

Good product. [...]

I got the item. Thanks for fast shipment. :)

Anil

2010-04-20T20:00:00

Rated 5 out of 5

The best available for Jet fins

These are without a doubt the best spring heel straps on the market. For the past few years I had used the Halcyon spring heel straps on my Jet fins and always worried about the metal post popping out of the clip. All that holds them on is about an eighth of an inch which you are supposed to "burr" so it can't pull through but who has the tools to do that? These XS Scuba spring heel straps are secured to the fin via a bolt and locking nut. You can ratchet them down real tight and will never have to worry about them coming loose or popping out. They look great also. I wear a size 11 shoe and the 10" straps with Jet fins are a perfect fit. You just can't go wrong with these...

DM

2010-01-04T19:00:00

Rated 5 out of 5

Heavy Duty Stainless

Comes with various adapters. Spring is covered and has nice pull tab for reaching back and down to ease removal in water.

DANIEL A.

2009-05-10T20:00:00

Rated 4 out of 5

Xs Scuba Universal Spring Fin Straps

great spring straps .remember to add 2 inches to the length for the buckels .they only give the spring length on the packaging.

WALTER S.

2009-02-26T19:00:00

Rated 5 out of 5

Great addition to my turtle fins!

These straps were easy to install & are permanently mounted so you don't have to worry about them popping off their button. They make fin donning/doffing a one handed quick & easy process.

MICHAEL I.

2009-01-20T19:00:00

Rated 4 out of 5

Easy to install

Easy to install on my Jet Fins.

Wild B.

2008-09-29T20:00:00

Rated 5 out of 5

Well worth it

Me and my girlfriend use to get in bad arguments whenever she use try to put on her Scuba Pro Twin Jet Max fins. She would get so frustrated. I got tired of them ruining our dives and days off so I decided to buy these. She loves them and even acts like she loves me. Now she can get her fins on and off faster than I can. She doesn't have an excuse to be mean to me anymore.

Buddy

Highland by XS Scuba Universal Spring Fin Straps Specifications

  • Purpose

    Replacement/Spare Spring Fin Straps

  • Materials

    Springs & Buckles: Stainless Steel & 316-Stainless Steel
    Cover: Nylon
    Spring Ends: Delrin

  • Buckle Style

    3-Styles Fixed Spring

  • Grip Tab

    Yes

  • Overall Dimensions

    10.5", 12.5" or 14.5" (26.7cm, 31.8cm or 36.8cm)

  • Spring Dimension

    8", 10" or 12" (20.3cm, 25.4cm or 30.5cm)

  • Compatibility

    XS Scuba Turtle, Power, Cressi Frog, Scuba Pro Jet, Twin Jet, Rocket & Others
    See SKU's: XSSFTE, XSSFP, CSBFFP SCPFTM, UDRFR2F, UDRFR
    Atomic Split Fins (see SKU's: ATMFX1, ATMFS, ATMFB)

  • UPC Code

    638170930829

About Highland by XS Scuba Universal Spring Fin Straps

FEATURED REVIEWS

Well worth it

By Buddy

Me and my girlfriend use to get in bad arguments whenever she use try to put on her Scuba Pro Twin Jet Max fins. She would get so frustrated. I got tired of them ruining our dives and days off so I decided to buy these. She loves them and even acts like she loves me. Now she can get her fins on and off faster than I can. She doesn't have an excuse to be mean to me anymore.

The Best Choice for Jet Fins

By DOCRADLEY

Well made, easy to install. The full pin attachment feels more secure than other designs. The half size adjustment is valuable when you are borderline on the size and need to account for a boot or boots of varying thickness. For classic fins like Jets and Rockets these are a must. Note that while these are easy to install there is some work involved in getting the standard buckles removed from the Jet Fins. Having a pair of End Cutters to clip the pins (wear safety glasses) makes this much ea...

View full Review

Most spring strap systems are designed for a fin or style of fin strap attachment. XS Scuba takes the guess work out of knowing it fits. Universal Spring Fin Straps Kit contains 3-styles of 316 stainless-steel buckles bound to fit whatever fin you have. old school buckles for Turtle, Power, Frog, Twin Jet and others (see SKU's: XSSFTE, XSSFP, CSBFFP SCPFTM) large post buckles fit most modern fins and even a Small Post for Atomics (see SKU's: ATMFX1, ATMFS, ATMFB).

Springs are built-to-last manufactured from .025" (6.35mm) diameter stainless-steel with an internal cave line to limit overstretching of the spring. Fin strap is covered in heavy-duty nylon tube webbing, with a large sure-grip pull tab for ease of putting on and taking off. Straps are easy to install and come in 3-spring lengths of 8", 10" or 12" (20.3cm, 25.4cm or 30.5cm) with overall strap and buckle lengths of 10.5", 12.5" or 14.5" (26.7cm, 31.8cm or 36.8cm). So, if you want the benefits of a spring fin strap these are the ones you want.

Highland by XS Scuba Universal Spring Fin Straps Features

  • XS Scuba Universal Spring Fin Straps:
  • One Kit Attaches to Almost-Any Scuba Fin
  • DIR Style .025" (6.35mm) Stainless Steel Springs
  • Internal Cave-Line Limits Over-Stretching Springs
  • Heavy-Duty Nylon Tube Webbing Covers
  • Large Sure-Grip Pull Tab
  • 3-Styles of 316-Stainless Steel Buckles Included:
  • "Old School" Buckles Fit:
    Turtle, Power, Frog, Jet, Twin Jet, Rocket and Others
    See SKU's: XSSFTE, XSSFP, CSBFFP SCPFTM, UDRFR2F, UDRFR
  • "Large Post" Buckles Fit Most of Today's Modern Fins
  • "Small Post" Buckles Fit Atomic Split Fins (see SKU's: ATMFX1, ATMFS, ATMFB)
  • 3-Spring Sizes: 8", 10" or 12" (20.3cm, 25.4cm or 30.5cm)
  • Overall Dimensions: 10.5", 12.5" or 14.5" (26.7cm, 31.8cm or 36.8cm)

Warranty Information

This product has a limited warranty of 24 months.

Key Features

  • Upgrade your scuba fins with these durable XS Scuba spring straps for secure performance.
  • Enjoy easy fin donning and doffing with these universal spring straps; a must-have scuba accessory.
  • These stainless steel spring fin straps resist corrosion, ensuring longevity in saltwater dives.
  • Three buckle styles included for compatibility with various scuba fins, enhancing your dive gear.
  • Delrin spring ends and nylon cover provide comfort and durability for your scuba diving adventures.
  • Get a custom fit with multiple sizes available for these spring straps, optimizing your fin propulsion.

What's in the box:

  • Pair of Highland by XS Scuba Universal Spring Fin Straps with 3 Sets of Buckles