XS Scuba Console Cover
See all XS Scuba items

XS Scuba Console Cover

SKU: XSSCOC

This item is no longer available.

Recommended Alternatives

XS Scuba : Picture 1 regular
XS Scuba Deluxe Cylinder Equalizer
$327.00
XS Scuba : Picture 1 regular
XS Scuba High Pressure Port Adapter 1 to 2 HP Port
$97.00$87.95
XS Scuba : Picture 1 regular
XS Scuba HP Hose QD Adapter
$131.00$119.95
XS Scuba : Picture 1 regular
XS Scuba Pressure Gauge Boot
$21.00
See More Recommendations
Overview
Compare
Specs
Protection
Q&A

Questions & Answers

Tim A : I have an OTS Guardian full face mask; is there a cover i can use when regulator is disconnected from the mask but still connected to the first stage?Mario C : Thank you for your question. The one you selected seems it will do the job just fine. I do not know a specific one for that use, but the benefit for it is clear.
GORDON R : Which cover do you recommend for the Oceanic Pro Plus 2.1?KAHIL S : Large. You want to make certain the console fits comfortably within the cover without forcing it.MAVERICK K : Gordon , I gambled when I purchased my cover and went with the smaller XS Scuba neoprene cover. Fits " Perfect", meaning nice and tight but still easy to unzip, fits in my reg bag pocket that XS Scuba also sells. Hope this helps and Happy diving, where abouts do you regularly dive? Maverick - Hilo , HawaiiMIYUKI S : LargeCANDACE F : I bought the larger console cover. It covers the entire unit including the end where it connects to the hose. A friend of mine has the smaller one and it just doesn't cover the console as well. I hope this helpsANTHONY W : Although I bought the XS Scuba Console Cover, it was actually for a different console (the Cobalt) so I realy cannot say.DUSTIN S : I bought the large one for my genesis with 2 gauges and compass. It may work for your oceanic pro plus 2 but leisure pro does a return policy if its loo large but I think you will be happy with it. You can always measure your gauge...that's what I did before I bought it.
Shopper : Why Did You Choose This?MARK H : Been looking for basic neoprene covers for my Scuba instruments for a while. Found the right sizes and quantity's I needed. The price is reasonable too. Thanks!RICHARD L : Avoiding scratches on my Computer Console.DAMON R : Only one there isSTEPHEN J : Needed them for our new computers.DAVID B : I recently purchased the Oceanic Veo Dive Computer SWIV double gauge combo and want to keep it safe and protected during transportation and storage.MARTIN C : Needed something to protect me and my sons computers for getting beat up on the boat,in the gearbag ect.They work great!And the price is always right at Leisure Pro!One went on a Oceanic proplus2,and the other on a suunto zoop 3 gauge console.And they fit perfect.NEIL S : I lost my old console cover on a crowded dive boat. Unfortunately, LeisurePro doesn't sell the old one (BLRPCC) anymore. This one looks like a suitable replacement.

Reviews about this item

Review Summary

2019-04-28T20:00:00

Rated 5 out of 5

XS Scuba Console Cover Review - Scuba Gear Reviews

took a shot that this might fit my oceanic pro plus 4.0it fits well enough to protect it.

JorgeI

2018-03-08T13:45:56

Rated 5 out of 5

Simple and efficient

These simple console covers do not have much science and technology, but they are very efficient and excellently fulfill their function both to cover the diving consoles and the SPG, I use them for the latter, protect my manometers. But not only that as they are versatile I use them to protect my Perdix computer, my Gopro and the diving lantern, during travel, transportation and even on board boats or boats with my diving equipment. They offer the necessary protection to the delicate equipment and enough rusticity to use them intensely.

ROBERTO P.

2017-03-17T00:34:52

Rated 3 out of 5

Cover

I fit my Mares Air-Puck W/C, but I thought it could have been a bit thicker.

Thomas G.

2014-06-02T20:00:00

Rated 4 out of 5

good console protection

Bought this to protect an Oceanic ProPlus 3 computer when traveling. The smaller unit is the perfect size, not too big or too small.

Papa

2013-10-31T20:00:00

Rated 4 out of 5

Using for seasonal storage

Bought on a whim but, the item is well constructed and fits my Cressi Mini 3. I use a padded bag when traveling but, will use this cover when storing for season.

ScubaCoyote

2013-09-29T20:00:00

Rated 5 out of 5

Protecting computer

I purchased the larger console cover which allows me to put the retractor on the back side of my Pro Plus 3 when storing it

Rick

2013-05-13T20:00:00

Rated 4 out of 5

well made

Bit big for the Oceanic Pro plus ...use the small version

captain m.

XS Scuba Console Cover Specifications

  • Overall Measurements

    Lengths:
    Standard; Up to 7.5" (19.1cm)
    Large: Up to 10" (25.4cm)

  • Closure

    Zippers

  • Material

    3mm Nylon-2 Neoprene Rubber

  • Type

    Dive Instrument Console Cover

  • UPC Code

    649823897413

About XS Scuba Console Cover

FEATURED REVIEWS

XS Scuba Console Cover Review - Scuba Gear Reviews

By JorgeI

took a shot that this might fit my oceanic pro plus 4.0it fits well enough to protect it.

Simple and efficient

By ROBERTO P.

These simple console covers do not have much science and technology, but they are very efficient and excellently fulfill their function both to cover the diving consoles and the SPG, I use them for the latter, protect my manometers. But not only that as they are versatile I use them to protect my Perdix computer, my Gopro and the diving lantern, during travel, transportation and even on board boats or boats with my diving equipment. They offer the necessary protection to the delicate equipmen...

View full Review

You have a lot of money invested in your dive computer or gauge console and want it to give you flawless service for years to come. Give your computer or gauge console better protection when you travel or when packed in a gear bag, with other dive equipment. Cover is made from soft 3mm nylon-2 neoprene rubber and has zipper closure to secure console and protect its delicate instruments. Console attached to hose or with quick disconnect can both fit nicely in this cover. There are 2 size covers to choose from. The standard cover will fit consoles up to 7.5" (19.1cm) in length and the large cover for consoles up to 10" (25.4cm) in length.

XS Scuba Console Cover Features

  • XS Scuba Console Cover:
  • Protect Computers and Consoles
  • 3mm Soft Neoprene Construction
  • Easy On / Off w/Side Zipper
  • Standard Size for Consoles Up to 7.5" (19.1cm)
  • Large Size: for Consoles Up to 10" (25.4cm)
  • Protects Your Investment

Warranty Information

This product has a limited warranty of 0 months.

Best Price Guaranteed + 5% OFF

Submit a price match

30/90 FREE Returns

Worry-free returns

Sell your Used Gear

Get started in 3 easy steps

Key Features

  • Protect your dive computer console with this durable XS Scuba console cover!
  • Keep your dive instruments scratch-free with our reliable neoprene console cover.
  • Ensure easy access with zippered closures on this water-resistant console cover.
  • Choose standard or large sizes; this XS Scuba cover fits most dive consoles.
  • Compact, 3mm neoprene console cover offers excellent value and added protection.
  • Extend the life of your dive computer with this essential XS Scuba accessory.

What's in the box:

  • XS Scuba Console Cover