



Need help? Ask our experts.
Downstream Demand Valve
Case: Molded Fiberglass Reinforced Nylon
Demand Valve: Chrome Plated Brass
Spring: Stainless Steel
Diaphragm, Mouthpiece & Exhaust Valve: Silicone Rubber
3/8"
27.56" (70cm)
6.7 oz (190g)
Back Inflator
29.2 lbs (13.2kg)
Right Shoulder/Lower Right Rear Overpressure Relief/Pull Dump Valves
Yes, Two
Rotating Torso Adjustable w/"Squeeze-Style" Side-Release Buckles
No, 4-Aluminum
Adjustable Latch-Style Buckle
Two-Position Sternum Strap w/"Squeeze-Style" Side-Release Buckle
Scubapro Air 2
420-Denier Nylon
Yes, Optional, Standard Trim Pockets
Not Specified by Manufacturer
4.8 to 5 lbs (2.2 to 2.3kg), Size Dependent
THE ULTIMATE STREAMLINED TRAVEL BC:
Lightweight, low-profile design is built with dive-trekkers in mind.
In the world of scuba diving, nothing exemplifies freedom of movement better than the feeling you get wearing minimal thermal protections and a bulk-free, back-flotation BC while cruising the crystalline waters of the tropics. Especially if it's a back-flotation BC built specifically for that purpose. Like the Litehawk. The Litehawk is the ultimate back-flotation travel BC. Its lightweight, ultra-slimmed-down design and soft, flexible backpack lays flat and compact for packing. The adjustable belt-style waist strap with nylon buckle can be cinched up snug, and the quick-release rotating shoulder buckles that let you route the straps under your arms, plus the two-position sternum strap, hug your body like the BC was custom-made for you.
But you can't fully appreciate the Litehawk until you get it in the water. With the tank secured by a lower primary tank band, an upper support strap and an adjustable yoke strap, the entire system locks in, ensuring a controlled, stable ride at depth. The BC carries no inherent buoyancy so only minimal ballast weight is required. Consequently, the two non-ditching pockets can be used to carry accessories. Optional quick-release weight pockets are also available, and four aluminum D-rings provide convenient clip-on points for additional gear. The Litehawk provides a streamlined package that travels easy and delivers a comfortable, stable ride at depth, making it well-suited for both tropical and temperate water travel diving.
Compact, lightweight design with soft backpack makes it perfect for dive travel. Constructed of 420-Denier nylon for lightweight and long-lasting durability. Low-profile, progressively-shaped rear air cell increases range of motion while decreasing drag. Elastic cords rein in the air cell when partially inflated and help control deflation. Clutter-free ergonomic harness eliminates bulk and enhances freedom of movement. Multiple band and strap system keeps tank secure and increases stability at depth. Three-dump deflation system lets you to dump air from a variety of underwater positions. Adjustable belt-style waist strap with nylon buckle offers a snug fit for any body shape. Rotating quick-release shoulder buckles allow you to optimize the routing of your shoulder straps to maximize fit. Two basic accessory pockets are included. Optional weight pockets are available. Two rear trim pouches allow you to achieve a well-balanced swimming position. Four aluminum D-rings provide convenient clip-on points for additional gear. Available in multiple sizes with 29.2 lbs. (13.2kg) of lift capacity. BCD weighs between 4.8 and 5 lbs. (2.2 to 2.3kg) depending on sizes. BCD includes owner manuals.
BCD comes equipped with Scubapro's AIR2 Breathable Inflator. When you took dive lessons you learned to perform specific skills to make you safe and comfortable underwater and at the surface. One of those skills was buoyancy control. Once you start diving for fun you use your buoyancy control device constantly throughout the dive. Your octopus or alternate air source devise on the other hand is never used unless there is an emergency out-of-air situation. Reacting properly in an out of air situation can make the difference between an eventful dive and a tragedy. If your alternate air source and your BCD inflator device are one and the same, you will always know where to find it in an emergency. AIR2 is more than a simple inflator. Its components design takes advantage from the best regulator technology to guarantee maximum efficiency and reliability. As an inflator AIR2 provides perfect pressure control for a great buoyancy management. Ergonomic shape makes it easy-to-handle in any circumstances and it can be emptied by simply pressing the exhaust button.
AIR2's air balanced power inflator provides smooth and reliable inflation at all tank pressures. Single hose configuration eliminates the need for a separate alternate air source. Fixed VIVA flow vane for safe and uncomplicated use one-hand operation for instinctive and simple operation the self-flushing mechanism requires just one push on the purge to clear away all dirt. The AIR2 uses a classic downstream valve for less maintenance and reliability. The housing is a precision molded carbon fiber and techno-polymer impact resistant design that weighs 6.7 oz (190g). The AIR2 comes with a 3/8" threaded 27.56" (70 cm) high-flow low-pressure hose.