Sea & Sea Optical YS Converter/N1 for Nikon MDX Housing

A compact unit that converts the camera's TTL signals to a light signal. The converter can be mounted on the camera's accessory shoe and can be connected to (a) Sea & Sea strobe(s) with fiber-optic cable(s). TTL and manual modes can be switched by pushing the mode switch on the housing. Sea &Sea's Fiber-Optic Cable II (see SKU: SSFO2) must be used with an Optical YS Converter. The converter controls are power on/power off/TTL mode (indicated by blue lamp)/manual mode (indicated by green lamp). Remaining battery level is indicated by flashing LED lamp. Auto Power Off: The converter will automatically power off if the shutter lever or the mode switch is not activated for more than one hour. The converter can be re-activated by pressing the mode switch.

The Sea & Sea Optical YS Converter is powered by 2 x AAA battery (alkaline: 3.0V / Ni-MH: 2.4V) with an approximate continues run time of 15 hours with alkaline batteries and with Mi-MH 12 hours. The converter case is made from durable corrosion resistant anodized aluminum alloy and has a depth rating of 200' (60 meters). The Converter measures (W x H x D) 2.1" x 1.6" x 2.1" (54.4 mm x 39.5mm x 53.3mm) without cable and weighs approximately 1.9 oz. (54 g) without batteries. Included with the Converter is a light guide pipe, 2 screws, 2 stickers and instruction manual.