Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.

Seasoft Pro/C6 6 mm Dry Suit Hood for Full Face Mask (FFM)

SKU: SSTC6H

This item is no longer available.

Overview
Compare
Accessories
Specs
Protection

Reviews about this item

Review Summary

2021-05-04T20:00:00

Rated 5 out of 5

Great service

Great products and service

LeoQ

2020-10-15T09:49:51

Rated 5 out of 5

Great fit, better seal

Fits great, just as comfortable as my Mares hood if not a little more so, just tends to be a little shorter around the neck

ANDY H.

2020-10-05T23:26:59

Rated 5 out of 5

Great hood for cold water with my FFM and wet suit.

This hood has worked wonderfully with my OTS Spectrum full-face mask. I wear it with the neck tucked under a wet suit, despite it being marketed as a "dry suit hood." The smooth outer skin around the face opening keeps my mask virtually leak free, and I can even wear regular prescription glasses by sliding the temple pieces under the mask seal before putting on the mask.

Brian O.

2019-02-10T07:47:59

Rated 2 out of 5

Didn't work well with the Poseidon Atmosphere

It could have just been the shape of my face but I could not get it to seal correctly with my Poseidon Atmosphere FFM. The positive pressure provided by the mask would find a spot an blow out.

RAYMOND S.

2017-04-20T13:44:33

Rated 4 out of 5

Fine hood with some alteration . . .

I use a FFMs with both drysuits and wetsuits; so I bought two hoods and added a 3 mm bib to one of them. Altogether, a fine product; though it could have used a bit more reinforcement where the skin met the nylon -- something I had added . . .

Dave D.

2016-04-05T09:31:36

Rated 4 out of 5

Kept mask on and head dry

Dove wih this hood on yesterday working under a boat. Kept ffm secured and sealed great. Kept head dry. Used with dry suit did not have any problems. Did notice that the seams around the face on the hood could be better. Can see the seam coming apart in the future.

JEFFREY T.

2015-11-13T07:25:51

Rated 4 out of 5

Good hood for FFM, but not as general dry suit hood

This is an excellent hood for drysuit and FFM use. The FFM seals right against the hood and there is no water intrusion. the hood feels like a perfect fit when I try it on at surface. However, the FFM strap helps hold the hood tight around your head. So if you use without a FFM, the hood stretches enough to get a big air pocket that affects your buoyancy and trim, significantly more than any other hood I've used (been drysuit diving for 25 years). For this reason, I only give it four stars. So, excellent and highly recommended when using a FFM, but not recommended if you don't use a FFM.

MnDiveGuy

2015-08-12T20:00:00

Rated 5 out of 5

Really Works!

LP always delivers on time. You can't go wrong with Leisure Pro.

Rich D.

2014-11-18T19:00:00

Rated 5 out of 5

Perfect for FFM

I used this hood for my Padi FFM certification. After using several other hoods with the typical big head ballooning from excess air from the FFM. I found the seal on this hood to be excellent. It has a neoprene skin inside and out for a mask over the hood seal. Take the time to measure your head as it does require an almost perfect fit. I normally wear a large however i measured my head for this hood and ordered a medium. Initially it felt a little tight, but when in the water it worked out perfectly and it will stretch a bit. My friend ordered a large as he normally does and hat issues with the seal so measure and then order you won't be dissapointed I had no issues with a tight fit on the neck. .

BOB S.

2013-11-17T19:00:00

Rated 5 out of 5

cold weather ffm hood

This is my 2nd one the first one lasted a little over a year. The last one tore at the attached seal skin around the face. Don't pull it down around your neck with your head through the face opening take it off properly and it will last. These hoods are perfect for cold weather diving with a full face mask and it doesn't matter which mask. I have used it with aga,guardian, or ocean reef and it works perfectly. I highly recommend this hood

Bluediver1

2012-04-23T20:00:00

Rated 4 out of 5

Bring on the full face masks!

Purchased hoods to be used on regional dive rescue operations in order to be able to utilize full face masks with diver-diver and diver-surface communications. True to fit. Comfortable, and will be put to good use. Bring on the full face masks!

DiveMedic766

2012-01-03T19:00:00

Rated 5 out of 5

Good dry suit hood

Very nice hood for use with a full face mask.

lodiveco

Seasoft Pro/C6 6mm Dry Suit Hood for Full Face Mask (FFM) Specifications

  • Material

    Nylon-2 Neoprene Rubber

  • Thickness

    6mm

  • Seams

    Glued & Sewn

  • Closure

    None Pull-Over

  • UPC Codes

    Medium: 654367663851 | X-Large: 654367663875 | XX-Large: 654367663882 | Large: 654367663868

SeaSoft Hoods M-2XL Size Chart
  Medium Large X-Large 2X-Large
Circumference of head at widest point (inches)
22-23 23-24 24-25 25-26
Circumference of head at widest point (cm)
56-58 58-61 61-63.5 63.5-66
Circumference of neck (inches) 14 15 16 17
Circumference of neck (cm) 35.5 38 40.5 43

4 Accessories for Seasoft Pro/C6 6 mm Dry Suit Hood for Full Face Mask (FFM)

  • All Accessories (4)
  • Equipment Care & Maintenance (4)

About Seasoft Pro/C6 6mm Dry Suit Hood for Full Face Mask (FFM)

FEATURED REVIEWS

Great fit, better seal

By ANDY H.

Fits great, just as comfortable as my Mares hood if not a little more so, just tends to be a little shorter around the neck

Perfect for FFM

By BOB S.

I used this hood for my Padi FFM certification. After using several other hoods with the typical big head ballooning from excess air from the FFM. I found the seal on this hood to be excellent. It has a neoprene skin inside and out for a mask over the hood seal. Take the time to measure your head as it does require an almost perfect fit. I normally wear a large however i measured my head for this hood and ordered a medium. Initially it felt a little tight, but when in the water it wor...

View full Review

When diving, the deeper a diver goes the colder it generally gets and with increasing pressure, a typical neoprene hood gets thinner. If the temperature is getting colder and your hood is getting thinner, you're going to get cold. And, when you consider that 35% of heat loss is from the head area, it seems like this would be a place to make sure you are adequately protected to ensure warmth and comfort.

The Seasoft Titanium PRO/C6 Hood has 4-different types of nylon-2 neoprene including compressed neoprene for the back-3 panels of the hood. This means that no matter how deep you go, they are still their original thickness and working to keep you warm!You will not find any seams down the middle of the chin either. This seam, found in almost all hoods today, can cause jaw fatigue. The Seam is there because it is less expensive to make a hood from just two halves. Seasoft does not believe that a hood is the place to go cheap.

The hood has titanium flakes foil technology that creates 2-layers of titanium Foil that reflects cold away and reflects your heat in keeping you warmer than hoods without this technology. The 6mm material is going to naturally fit and stretch around your head better. This leaves less room for cold water to occupy under your hood, this helps to maintain warmth as well. There are also two very small holes for air to escape from the inside crown of the hood in case air enters your hood with a thin baffle built over the holes to prevent water from entering.

The Seasoft PRO / C6 6mm Dry Suit Hood is a commercial dry suit hood designed to be worn with a full-face mask in cold water. The PRO/C6 has a layer of skin-in neoprene on the inside and on the outside with a layer of tough nylonin between these two layers. The skin-in neoprene allows the hood to seal to your face and the full-face mask to Seal to the Hood.SeaSoft Pro/C6 Wetsuit Hood use 6mm Neoprene with Glued and Sewn Seams for strength and durability. The hood is available in multiple sizes and is black in color.

Seasoft Pro/C6 6mm Dry Suit Hood for Full Face Mask (FFM) Features

  • Pro/C6 6mm Dry Suit Hood for Full Face Mask (FFM):
  • Specifically Designed for Full Face Mask Divers In-Cold-Water
  • 35% of Heat Loss from Head
  • Construction: 4 Different Types of Nylon-2 Neoprene
  • Compressed Neoprene:
    Back 3-Panels of Hood
    Won't Get Thinner at Depth
  • Thicker Neoprene: Warmer Dive
  • No Chin Seam: Reduced Jaw Fatigue
  • Titanium Flakes Foil Technology:
    2-Layers of Titanium Foil
    Reflects Cold Away & Reflects Your Body Heat In
  • 6mm Naturally Fit & Stretch Around Head Better
  • Small-Holes w/Thin-Baffle On-Inside-Crown Vent Trapped Air
  • Seams Glued & Sewn for Strength & Durability
  • Layer of Skin-In Neoprene On-Inside & Outside w/Layer of Tough Nylon In-Between
  • Skin-In Neoprene Allows Hood to Seal to Face & Full-Face Mask to Seal to Hood
  • Available in Multiple Sizes
  • Color: Black

Warranty Information

This product has a limited warranty of 24 months.

Key Features

  • Designed for Full Face Mask Divers
  • 6mm Compressed Neoprene Construction
  • No Chin Seam: Reduced Jaw Fatigue
  • Titanium Flakes Foil Technology
  • Vented for Releasing Trapped Air

What's in the box:

  • Pro/C6 6mm Dry-Suit Hood
  • Seasoft 2 Year Limited Warranty