Seac Screen Scuba Wrist Dive Computer, PX100 230 Yoke Regulator with Octopus & Pressure Gauge Set

- Seac Screen Scuba Wrist Dive Computer -
The Seac Screen is the dive computer that aims to ease the reading of all the dive profile data. The large display shows all the main information in one view, with clearly readable and distinct characters. Contrast and brightness can be adjusted, as well as the light mode (automatic or manual) and the backlight time (from 2 sec to 60 sec). The display measures 1.57 x 1.85" (4 x 4.7cm) and is protected by a sturdy rubber housing. Total computer face measures 2.64 x 2.76" (6.7 x 7cm). The computers long wrist strap is designed to wear the Seac Screen comfortably, even over a dry suit. The strap length, from the buckle to the opposite end is 14.17" (36cm). The two well-defined front buttons let allow the Screen Computer to be managed quickly and easily even when wearing thick gloves.

The Seac Screen Wrist Dive Computer operates in 3 main modes: Scuba, Gauge and Free-Dive. In Scuba mode, the dive profile is completely managed according to the Buhlmann ZHL-16C decompression algorithm. It supports the management of 1 or 2 mixes (air, Nitrox and other mixes with O2 up to 99%), notifying the user at the most suitable time to change the mix. It has sound alarms and warning lights in case of violation of the decompression stop, excessive ascent speed and exceeding the maximum depth allowed for all mixes in use. In Gauge mode, the Screen Computer displays depth gauge and stopwatch for fully independent dive management for more experienced divers. In Free-Dive mode, free divers can view surface intervals and dive times, current depth and maximum depth reached during the session.

The Seac Screen dive planner allows you to simulate and plan a dive by displaying the No Decompression Limit (NDL) time based on a set depth and other data input (mixture, maximum PpO2, caution level). The Logbook records up to 40 hours of diving in Scuba/Gauge mode or 18 hours in Free-Dive mode. Downloadable data via USB (sold separately). Firmware update and Seac Dive Manager software are available online (free download at Seacsub.com). The Seac Screen is powered by a CR2450 battery and is not rechargeable. It can be replaced by the user but it is still recommended to contact an authorized Seac center to change the battery and cover O-ring. The computer has a maximum depth limit of 330' (100m), calculation of no fly and desaturation times, maximum allowed altitude warning, fresh or salt water selection. Seac Screen is also available in a 2-gauge console version with a pressure gauge. Computer comes with an owner's manual.

- Seac PX100 230 Yoke Regulator with Octopus -

Reliable and Functional Design
The PX100 230 INT Regulator with Octopus is a dependable choice for divers seeking high performance and simplicity in one package. This set includes the PX100 regulator with a 230 BAR connection and the PX OCTO octopus, ensuring you have everything you need for a safe and enjoyable dive. The first stage features a simple piston design with one high-pressure port and four low-pressure ports, providing versatile connectivity for your gear. The second stage is designed with functionality in mind, featuring a large diaphragm that ensures natural and effortless breathing. This regulator with octopus also includes an adjustable Venturi effect (Dive / Pre Dive), allowing you to easily switch between Dive and Pre-Dive modes with a simple flick of a switch.

Optimized for Cold Water Diving
The INT Regulator with Octopus is optimized for cold water environments, performing exceptionally well in temperatures below 10 Degree C (50 Degree F). This regulator set complies with the CE EN 250-2014 standard, ensuring that you are diving with equipment that meets the highest safety and performance criteria. The hoses are coated with braided lining, providing durability and flexibility, while the M 3/8" connection ensures a secure fit. Whether you're diving in cold waters or exploring temperate environments, this regulator with octopus is designed to consistent and reliable performance.

Italian Craftsmanship and Quality
Proudly made in Italy, the INT Regulator with Octopus exemplifies superior craftsmanship, Every component is meticulously designed and manufactured to ensure long-lasting performance, making this regulator set a valuable addition to any diver's gear collection. With its combination of functionality, reliability, and Italian quality, the PX100 regulator with octopus set is a top choice for both professional divers and enthusiasts alike.

- Seac Pressure Gauge -
Seac Pressure Gauge measures up to 5000 PSI of pressure. The Seac Italian made pressure gauge has gauge faces that is luminescent for low light and night diving conditions. The pressure gauge has an internal spiral system for increased accuracy at all pressures readings. Built to last the pressure gauge case is made from molded brass and has a chrome-plated exterior. Pressure gauge comes with a 31.5" (80cm) 7/16" threaded high-performance HP hose. The gauge lens is manufactured from high-performance polycarbonate and the gauge readout is 0 to 5000 psi.

The pressure readout is color coded for easy at-a-glance monitoring of diver's gas supply. The pressure gauge face is color coded red from 0 to 500 psi for reserve air warning, 1000 to 3000 psi is green, from 3000 psi to 4500 psi a blend of white, green and yellow and from 4500 psi to 5000 psi yellow. Nitrox-compatible up to 40% oxygen. Gauge boot is impact resistant and has an eyelet at the end for attachment of lanyard or clip.