Seac Screen Dive Computer Console w/Pressure Gauge

Seac Screen Dive Computer Console w/Pressure Gauge

Ease of reading your critical dive data as well as simple screen navigation are the highlights of the fully featured Seac Screen dive computer. Contrast and brightness can be adjusted, as well as the light mode (automatic or manual) and the backlight time (from 2 sec to 60 sec).

Italian made, the Seac pressure gauge is housed in a durable, impact resistant boot that is equipped with multiple attachment points for lanyards or clips. Built to last the pressure gauge case is made from molded brass and has a chrome-plated exterior. Pressure gauge comes with a 31.5" (80cm) 7/16" threaded high-performance HP hose.

Easy to Use, with 3 Main Modes:

• Scuba Mode:
Supports 1 or 2 Mixes
Air, Nitrox & Other Mixes w/O2 Up to 99%)
Sound Alarms & Warning Lights for Violations
Decompression Stop, Excessive Ascent Speed, Exceeding Max. Depth for Mixes-In-Use
• Gauge Mode:
Displays Depth Gauge & Stopwatch
Fully Independent Dive Management
Designed for More Experienced Divers
• Free-Dive Mode:
View Surface Intervals & Dive Times
Current Depth
Maximum Depth Reached During Session

Ease of Reading:

The large display shows all the main information in one view, with clearly readable and distinct characters. Contrast and brightness can be adjusted, as well as the light mode (automatic or manual) and the backlight time (from 2 sec to 60 sec).

Additional Features:

• The Logbook records up to 40 hours of diving in Scuba/Gauge mode or 18 hours in Freedive mode.
• SEAC Screen works with a CR2450 battery and is not rechargeable. It can be replaced by the user but it is still recommended to contact an authorized SEAC center to change the battery and cover o-ring.
• Additional info: maximum depth 100 meters, calculation of NoFly and Desaturation times, maximum allowed altitude warning, fresh or salt water selection.

Dive Manager:

• Dive Manager software for MAC/PC (requires Windows 10), available free of charge at Seacsub.com.
• Download data via USB cable (optional accessory).

The Seac Screen is the dive computer that aims to ease the reading of all the dive profile data. The large display shows all the main information in one view, with clearly readable and distinct characters. Contrast and brightness can be adjusted, as well as the light mode (automatic or manual) and the backlight time (from 2 sec to 60 sec). The display measures 1.57 x 1.85" (4 x 4.7cm) and is protected by a sturdy rubber housing. Total computer face measures 2.64 x 2.76" (6.7 x 7cm). The two well-defined front buttons let allow the Screen Computer to be managed quickly and easily even when wearing thick gloves.

The Seac Screen Dive Computer operates in 3 main modes: Scuba, Gauge and Free-Dive. In Scuba mode, the dive profile is completely managed according to the B¼hlmann ZHL-16C decompression algorithm. It supports the management of 1 or 2 mixes (air, Nitrox and other mixes with O2 up to 99%), notifying the user at the most suitable time to change the mix. It has sound alarms and warning lights in case of violation of the decompression stop, excessive ascent speed and exceeding the maximum depth allowed for all mixes in use. In Gauge mode, the Screen Computer displays depth gauge and stopwatch for fully independent dive management for more experienced divers. In Free-Dive mode, free divers can view surface intervals and dive times, current depth and maximum depth reached during the session.

The Seac Screen dive planner allows you to simulate and plan a dive by displaying the No Decompression Limit (NDL) time based on a set depth and other data input (mixture, maximum PpO2, caution level). The Logbook records up to 40 hours of diving in Scuba/Gauge mode or 18 hours in Free-Dive mode. Downloadable data via USB (sold separately). Firmware update and Seac Dive Manager software are available online (free download at Seacsub.com). The Seac Screen is powered by a CR2450 battery and is not rechargeable. It can be replaced by the user but it is still recommended to contact an authorized Seac center to change the battery and cover O-ring. The computer has a maximum depth limit of 330' (100m), calculation of no fly and desaturation times, maximum allowed altitude warning, fresh or salt water selection. Want only a wrist mount computer, Seac Screen is also available in a wrist version (see SKU: SECSWDC). Computer comes with an owner's manual.

The Seac Screen Console comes with a pressure gauge in a durable impact resistant boot that is equipped with multiple attachment points for lanyards or clips. Seac Pressure Gauge measures up to 5000 PSI of pressure. The Seac Italian made pressure gauge has gauge faces that is luminescent for low light and night diving conditions. The pressure gauge has an internal spiral system for increased accuracy at all pressures readings. Built to last the pressure gauge case is made from molded brass and has a chrome-plated exterior. Pressure gauge comes with a 31.5" (80cm) 7/16" threaded high-performance HP hose. The gauge lens is manufactured from high-performance polycarbonate and the gauge readout is 0 to 5000 psi.

The pressure readout is color coded for easy at-a-glance monitoring of diver's gas supply. The pressure gauge face is color coded red from 0 to 500 psi for reserve air warning, 1000 to 3000 psi is green, from 3000 psi to 4500 psi a blend of white, green and yellow and from 4500 psi to 5000 psi yellow. Nitrox-compatible up to 40% oxygen.