Scubapro 2 Gauge Console, Imperial

2019-05-05T20:00:00

Worked fantastic very easy to read

MarkN

2018-09-17T09:26:09

First i would have preferred to get the pressure and depth gauge combo but for some reason I could not find it in non-retard units :)) , meaning metric. Hence i went only with the single metric pressure gauge. After i bought this i managed to get around 70 dives before this review and all i can say is that it has performed to the best of its capabilities. The needle does not move around or such even at low pressure and as far as i was willing to test it, it's pretty accurate in regards to the tank content. I've done my best to avoid hitting and dragging it so it has held up well and the protective material does what it's supposed to.

George G.

2018-08-06T07:15:03

Have had it for a few years now. No issues, works great. Love scubapro

Gianpaul D.

2018-01-26T19:00:00

I am a commercial diver and needed a pressure gauge for my bailout bottle. This gauge is the perfect choice for that purpose. It has a large white face which makes it very readable and it is in 100psi increments which means I can better tell if my bottle is loosing pressure through the daily task of pressuring my whip and etc etc. This gauge is heavier than you'd expect which is awesome. I def recommend this gauge.

diver d.

2017-06-25T20:00:00

Works great easy to read. I use it as a back up for my hoseless computer

Steven

2017-01-01T02:58:55

I HAVE WHAT I EXPECTED FROM SCUBAPRO QUALITY AND SERVICE

ELIEL R.

2016-10-27T14:22:11

Great gage reliable and easy to read. Couldn't be happier

MICHAEL S.

2015-02-07T19:00:00

I really wanted to like this. It has a nice design and all analog gauges make a nice backup to a misbehaving computer or bottom timer with a dead battery. The tank pressure gauge worked fine, but the full range was 6000 psi. Right off, I would lose half my resolution on my 3000 psi tank. Not a big issue. The depth gauge reads 0 to 200 feet, again making it difficult to resolve an accurate depth. Again, I would be using it only as a backup for my dive computer. Perhaps I received a defective console, but the temperature indicator was sticky and inaccurate. I understand that a mechanical temperature gauge inside a console is not going to be super responsive, it was also more than 10 degrees off making me wonder how far off the depth gauge was. I let it go. But, I didn't like the compass. As I reversed direction, the heading would lag between 5 and 10 degrees. If I shook the console, it would spin 30 degrees clockwise. The compass also has an opening in the bottom for a depth-activated light. I searched the planet and failed to find the light anywhere. Without it, the bottom of the console looks ugly and unfinished. I took out my vintage Dacor Diving console and checked out the compass behavior. It was dead on. At that point, I decided that his console was just too inaccurate to serve as a backup. It is pretty tho.

hbutz

2014-01-30T19:00:00

Awesome gauge, works perfect. Figure out a clip method for it and you're golden. Make sure if you are trying for PSI you get Imperial.

GP

2013-11-19T19:00:00

good product

Atilio

2012-11-15T19:00:00

Not to big and readability.

yuqingliu

2012-08-09T20:00:00

Works great...Numerals are very clear underwater

RolandG

2012-03-20T20:00:00

Great guage if you don't require a depth guage.

ESM