TUSA Soverin Alpha AWLS III BCD Bundle with Underwater Kinetics Super BCD & Regulator Hanger

TUSA's Soverin Alpha incorporates TUSA's new Advanced Weight Loading System (A.W.L.S III). The BCD features a new repositionable D-ring and snap hook design for personal customization. The Soverin Alpha offers a secure comfortable fit provided by TUSA's Independent Harness System, enhanced lumbar and comfort back pad. The newly designed waist belt adjusts effortlessly and the weight trim pockets are sealed by heavy duty zippers.

TUSA's 3'rd generation Advanced Weight Loading System (AWLS III) allows the diver to insert weights into the weight-cartridges and loading them easily into the front of the BC jacket. Additionally, with weight distribution to the shoulder area, the weighted-down feeling that is traditionally associated with weight belts is eliminated. Weight cartridges can accommodate 8 lbs (3.63kg) of weight in each cartridge and two rear zippered closure trim pockets can hold up to 4 lbs (2kg) in each non-releasable pocket. The AWLS weight cartridges are easy to release in an emergency, but the safety lock makes sure that they do not release accidentally.

The Rite Tite Buckle is a 2-position cylinder cam strap for quick-and-easy adjustment. While the strap is being looped through the buckle, the buckle stays in place without needing to be held. This allows for more control and stability. TUSA's Ultimate Stabilizing Harness completely eliminates tank roll and delivers an amazing fit. The U.S.H. securely holds the air cylinder in place with optimally placed rails and brings the tank closer to the body increasing tank control while reducing weight.

Torso-adjustable shoulder and sternum straps provide excellent comfort along with an adjustable waist strap with cummerbund provides precise adjustment of harness. All straps are equipped with squeeze-style side-release buckles for easy donning and doffing.Sternum strap is equipped with a signaling whistle. The Soverin Alpha BCD has an enhanced lumbar and back pad for maximum comfort.The BCD's "Independent Harness System" (IHS) isolates the BC jacket's harness from the air cell, tightly supporting the tank even with changes in air cell inflation/deflation. The IHS prevents tank slippage and eliminates any gaps between the tank and your back. The air cell is constructed from durable 500D Cordura with a urethane lamination that has radio frequency (RF) welded seams. Buoyancy control is facilitated with the TUSA Tilt Valve Inflator mechanism. Inflator is equipped with a left shoulder cable activated pull dump valve and comes complete with a 3/8" threaded QD hose assembly. The jacket BCD also has a right shoulder and right rear lower overpressure/relief valves with pull cords for trimming buoyancy in any position when diving. The Soverin Alpha BCD provides lift capacities from 18 lbs to 38.2 lbs (8.2 kg to 17.3kg) depending on size and has a dry weight of 7.1 lbs to 7.5 lbs (3.2 kg to 3.4kg) depending on size. The Soverin Alpha BCD comes with an owner's manual.

Underwater Kinetics was the first dive company to provide divers with a series of hangersdesigned specifically for diving equipment. The hangers had to be non-corroding, non-staining, sunlight resistant and strong enough to support the weight of wet dive equipment while remaining reasonably priced. The inspiration for the unusual shapes of these hangers came from divers who wanted to get their equipment off the floor, out of the sand and up the air for drying after a rinse in fresh water. The hangers turned out to be so rugged that most diving retailers used them to display equipment in their stores.

Proper preventative maintenance is the best way to prolong the life of all your diving equipment. The hanger designed for holding a BC and regulator has been redesigned for versatility and ease of use. The original design required the diver to remove the dust cap of the regulator and screw the first stage onto the hanger. The purpose of this was to make sure that the regulator did not fall off. In the new design of theBC hangeran inverted T-hook is provided for draping the regulator hoses from the hanger while still providing resistance to slipping off onto the floor. The shoulder tips of the hanger are hooked upward to prevent the BC from sliding off as it would on a conventional hanger.

Finally, a hanger designed-specifically for holding a BC vest and regulator during drying and storage. The Super BC Hanger is also ideal for use with police vests, body armor and bulletproof vests. Due to its expert design, your gear fits on it easily, for a no-hassle drying and storage solution. The hanger measures: (L x W x H) 16 x 1.2 x 10" (40.6 x 3 x 25.4cm). The Super Hanger has one-piece I-beam construction for strength and can support up to 50 lbs (22.68kg) of weight. The hanger is made from non-corroding plastic resin will not rust, is available in multiple colors and is proudly made in the USA.