TUSA Liberator AWLS III BCD Bundle with Underwater Kinetics Super BCD & Regulator Hanger

The updated, next-generation Liberator BC-0103 buoyancy compensator is a durable, wrap-around jacket style BC. The Liberator comes standard with TUSA's ever-reliable tilt valve inflator. TUSA's new Advanced Weight Loading System III provides hassle-free weight loading. The Ultimate Stabilizing Harness will ensure a comfortable and secure diving experience. Advanced Weight Loading System III (AWLS) allows diver to insert weights into weight-cartridges & loading them easily into the front of the BC jacket. Weight distribution to the shoulder area, weighted-down feeling that is associated with weight belts is eliminated. Weight-Cartridges can accommodate from 8 lbs (3.63kg) of weight in each cartridge.

The Ultimate Stabilizing Harness (USH) eliminates tank roll & delivers amazing fit. The USH securely holds the air cylinder in place w/optimally placed rails & brings the tank closer to the body increasing tank control while reducing weight.

The Ritetite Buckle, a 2-position cam strap for quick & easy adjustment. While the strap is looped thru-the-buckle, the buckle stays in place w/o needing to be held, allows for more control & stability. Jacket is made from 500 Cordura and 420D nylon material, with a urethane lamination that has radio frequency (RF) welded seams. Buoyancy control is facilitated with the TUSA Tilt Valve Inflator mechanism. Inflator is equipped with a left shoulder cable activated pull dump valve and comes complete with a 3/8" threaded QD hose assembly. The jacket BCD also has a right shoulder and right rear lower overpressure/relief valves with pull cords for trimming buoyancy in any position when diving. Storage and attachment of accessories is made easy with the two zippered pockets and 1-stainless-steel and 5-resin D-rings. The Liberator BC-0103 BCD provides 18 lbs (8.2kg) of lift in size XS, 20.2 lbs (9.2kg) of lift in sizes SM, 27 lbs (12.2kg) of lift in size MD, 33.7 lbs (15.3kg) of lift in size LG and 40.5 lbs (18.4kg) of lift in size XL. The dry weight of the BCD is from 6.4 lbs (2.9kg) to 7.1 lbs (3.2kg) depending on the sizes. BCD comes with an owner's manual.

Underwater Kinetics was the first dive company to provide divers with a series of hangersdesigned specifically for diving equipment. The hangers had to be non-corroding, non-staining, sunlight resistant and strong enough to support the weight of wet dive equipment while remaining reasonably priced. The inspiration for the unusual shapes of these hangers came from divers who wanted to get their equipment off the floor, out of the sand and up the air for drying after a rinse in fresh water. The hangers turned out to be so rugged that most diving retailers used them to display equipment in their stores.

Proper preventative maintenance is the best way to prolong the life of all your diving equipment. The hanger designed for holding a BC and regulator has been redesigned for versatility and ease of use. The original design required the diver to remove the dust cap of the regulator and screw the first stage onto the hanger. The purpose of this was to make sure that the regulator did not fall off. In the new design of theBC hangeran inverted T-hook is provided for draping the regulator hoses from the hanger while still providing resistance to slipping off onto the floor. The shoulder tips of the hanger are hooked upward to prevent the BC from sliding off as it would on a conventional hanger.

Finally, a hanger designed-specifically for holding a BC vest and regulator during drying and storage. The Super BC Hanger is also ideal for use with police vests, body armor and bulletproof vests. Due to its expert design, your gear fits on it easily, for a no-hassle drying and storage solution. The hanger measures: (L x W x H) 16 x 1.2 x 10" (40.6 x 3 x 25.4cm). The Super Hanger has one-piece I-beam construction for strength and can support up to 50 lbs (22.68kg) of weight. The hanger is made from non-corroding plastic resin will not rust, is available in multiple colors and is proudly made in the USA.