TUSA Conquest II BCD Bundle with Underwater Kinetics Super BCD & Regulator Hanger

TUSA's BC0201 Conquest II is the latest in BC technology incorporating a Hybrid 3-D Cubic Bladder design and TUSA's Advanced Weight Loading System (A.W.L.S II). The BC0201 features a newharness system providing ultimate tank stability and unsurpassed buoyancy control. The Conquest II comes standard with TUSA's A.P.A. (Active Purge Assist) System and enhanced lumbar and back pad for maximum comfort.In addition, the Conquest II offers a new Custom Accessory Dock with the resin Quick Clip and D-ring accessory. The custom accessory dock offers the ability to customize your TUSA BC's accessory attachment points. Seven (7) customizable attachment points allow the user to position their accessories in a location that best suits their needs. Conquest offers several features including 4 dump valves (OPEV + 3), 4 Stainless & 4 Resin D-rings, knife grommets and 2 zippered pockets.

The 3-D Hybrid Cubic Air Cell combines the features of a wrap-around style BCJ and a back-inflation BCJ into a unique streamlined hybrid design. The air cell offers increased lift capacity over standard back-inflation jackets and a more streamlined, comfortable fit underwater and on the surface. The BCD provides between 38.2 lbs and 52.8 lbs (17.3 kg to 24kg) of lift capacity depending on size. TUSA's 2'nd generation Advanced Weight Loading System (AWLS II) allows the diver to insert weights into the weight-cartridges and loading them easily into the front of the BC jacket. Additionally, with weight distribution to the shoulder area, the weighted-down feeling that is traditionally associated with weight belts is eliminated. Weight cartridges can accommodate 8 lbs to 10 lbs (3.63 kg to 4.54kg) of weight in each cartridge and two rear trim pockets can hold up to 4 lbs (2kg) in each non-releasable pocket. The AWLS weight cartridges are easy to release in an emergency, but the safety lock makes sure that they do not release accidentally.

The Rite Tite Buckle is a 2-position cylinder cam strap for quick-and-easy adjustment. While the strap is being looped through the buckle, the buckle stays in place without needing to be held. This allows for more control and stability. TUSA's Ultimate Stabilizing Harness completely eliminates tank roll and delivers an amazing fit. The U.S.H. securely holds the air cylinder in place with optimally placed rails and brings the tank closer to the body increasing tank control while reducing weight. The Waist Support System (W.S.S.) significantly enhances comfort and fit by dispersing the weight load around the hips. The W.S.S. integrates the adjustable shoulder harness system with the rear stabilizing plate and cummerbund to effectively unload the hips while ensuring a snug fit.

Torso-adjustable shoulder and sternum straps provide excellent comfort along with an adjustable waist strap with cummerbund provides precise adjustment of harness. All straps are equipped with squeeze-style" side-release buckles for easy donning and doffing.The Conquest II BCD has an enhanced lumbar and back pad for maximum comfort.Exclusive to TUSA, the Active Purge Assist is a pneumatically assisted power inflator. Using a piston, the power inflator activates a stainless-steel cable connected to the shoulder dump valve. The APA assures a quick response when deflating air from the BC. The Conquest II is built to last manufactured from durable 840D and 420D nylon fabrics. The BCD comes with a 3/8" threaded low pressure hos with quick disconnect for inflation and an owner's manual.

Underwater Kinetics was the first dive company to provide divers with a series of hangersdesigned specifically for diving equipment. The hangers had to be non-corroding, non-staining, sunlight resistant and strong enough to support the weight of wet dive equipment while remaining reasonably priced. The inspiration for the unusual shapes of these hangers came from divers who wanted to get their equipment off the floor, out of the sand and up the air for drying after a rinse in fresh water. The hangers turned out to be so rugged that most diving retailers used them to display equipment in their stores.

Proper preventative maintenance is the best way to prolong the life of all your diving equipment. The hanger designed for holding a BC and regulator has been redesigned for versatility and ease of use. The original design required the diver to remove the dust cap of the regulator and screw the first stage onto the hanger. The purpose of this was to make sure that the regulator did not fall off. In the new design of theBC hangeran inverted T-hook is provided for draping the regulator hoses from the hanger while still providing resistance to slipping off onto the floor. The shoulder tips of the hanger are hooked upward to prevent the BC from sliding off as it would on a conventional hanger.

Finally, a hanger designed-specifically for holding a BC vest and regulator during drying and storage. The Super BC Hanger is also ideal for use with police vests, body armor and bulletproof vests. Due to its expert design, your gear fits on it easily, for a no-hassle drying and storage solution. The hanger measures: (L x W x H) 16 x 1.2 x 10" (40.6 x 3 x 25.4cm). The Super Hanger has one-piece I-beam construction for strength and can support up to 50 lbs (22.68kg) of weight. The hanger is made from non-corroding plastic resin will not rust, is available in multiple colors and is proudly made in the USA.