TUSA Tina Female BCD Pink Bundle with Underwater Kinetics Super BCD & Regulator Hanger

TUSA's BC0403 Tina is a BC with a high-cut waist designed for women eliminates discomfort when wearing lead weight.Ergonomically and comfort designed, the new BC0403 features quick-drying shoulder and back pads with enhanced cushioning. Also incorporates TUSA's new Advanced Weight Loading System (A.W.L.S III), Repositionable stainless, resin D-rings and snap hook design for personal customization. TUSA's Independent Harness System, enhanced lumbar and comfort back pad provide a secure comfortable fit. The newly designed waist belt adjusts effortlessly, and the two large BCpockets are equipped with double zippers providing easy access to your accessories. Two additional pockets designed to house your gauges and safe second stage "Octo".

A.W.L.S. III (Advanced Weight Loading System III):
A secure single locking integrated weight system that allows you to quickly and easily secure your weight pockets. The A.W.L.S. III allows the diver to insert weights into the weight-cartridges and load them easily into the front of the BC jacket. The Tina weight pockets can hold up to 17.6 lbs (8kg) of hard or soft lead.

Independent Harness System (I.H.S.):
The Independent Harness System isolates the BC jacket's harness from the air cell, tightly supporting the tank even with changes in air cell inflation/deflation. The I.H.S. prevents tank slippage and eliminates any gaps between the tank and your back.

Ritetite Buckle:
The Ritetite Buckle is a two (2)-position cam strap for quick and easy adjustment. While the strap is being looped through the buckle, the buckle stays in place without needing to be held. This allows for more control and stability. This feature is part of all TUSA BC's.

Ultimate Stabilizing Harness (U.S.H.):
TUSA's Ultimate Stabilizing Harness completely-eliminates tank roll and delivers an amazing fit. The U.S.H. securely holds the air cylinder in place with optimally placed rails and brings the tank closer to the body increasing tank control while reducing weight.

Waist Support System (W.S.S.):
The Waist Support System significantly enhances comfort and fit by dispersing the weight load around the hips. The W.S.S. integrates the adjustable shoulder harness system with the rear stabilizing plate and cummerbund to effectively unload the hips while ensuring a snug fit.

BCD is made from durable 500-Cordura nylon with an internal urethane laminated air cell.Torso adjustable shoulder and sternum straps provide excellent comfort and adjustable waist strap with cummerbund provides precise adjustment of harness. All straps are equipped with "squeeze-style" side-release buckles for easy donning and doffing. Sternum strap also comes with a handy built-in signaling whistle. Buoyancy is controlled by TUSA's patented O.P.E.V. Quick inflate/Deflate System. Trimming buoyancy is easy with 2-dump/overpressure relief valves. BCD provides 21.4 lbs to 32.6 lbs (9.7 kg to 14.8kg) of lift and has a dry weight of 6.1 lbs to 7.1 lbs (3.1 to 3.4kg) depending on the BCD size. The TUSA Tina BC comes with a 3/8" threaded inflator hose and an owner's manual.

Underwater Kinetics was the first dive company to provide divers with a series of hangersdesigned specifically for diving equipment. The hangers had to be non-corroding, non-staining, sunlight resistant and strong enough to support the weight of wet dive equipment while remaining reasonably priced. The inspiration for the unusual shapes of these hangers came from divers who wanted to get their equipment off the floor, out of the sand and up the air for drying after a rinse in fresh water. The hangers turned out to be so rugged that most diving retailers used them to display equipment in their stores.

Proper preventative maintenance is the best way to prolong the life of all your diving equipment. The hanger designed for holding a BC and regulator has been redesigned for versatility and ease of use. The original design required the diver to remove the dust cap of the regulator and screw the first stage onto the hanger. The purpose of this was to make sure that the regulator did not fall off. In the new design of theBC hangeran inverted T-hook is provided for draping the regulator hoses from the hanger while still providing resistance to slipping off onto the floor. The shoulder tips of the hanger are hooked upward to prevent the BC from sliding off as it would on a conventional hanger.

Finally, a hanger designed-specifically for holding a BC vest and regulator during drying and storage. The Super BC Hanger is also ideal for use with police vests, body armor and bulletproof vests. Due to its expert design, your gear fits on it easily, for a no-hassle drying and storage solution. The hanger measures: (L x W x H) 16 x 1.2 x 10" (40.6 x 3 x 25.4cm). The Super Hanger has one-piece I-beam construction for strength and can support up to 50 lbs (22.68kg) of weight. The hanger is made from non-corroding plastic resin will not rust, is available in multiple colors and is proudly made in the USA.