OTS Spectrum Full Face Mask and OTS Buddy Phone D2 Package

With over 60 years of diving experience and having sold almost every full-face mask (FFM) on the market, it was easy to see there was a need for something better. With the Spectrum, Full Face Mask, Ocean Technology Systems created the best full-face mask (FFM) on the market that allows divers to user their own regulators and eliminating the heavy cost associated with standard Full-Face Masks (FFMs), without sacrificing luxury. The Spectrum FFM provides a simple method to adapt your own regulator to the mask by eliminating the bite down mouthpiece and tying your own regulator in with the rest of the FFM. This allows for some of the best features of OTS's other Full-Face Masks: no jaw fatigue, no dry mouth, double seal for a better fit, five-point head harness and clear communications.

The all new Spectrum FFM has a coated tempered glass/iridium safety visor for exceptional and a wide field of vision. The skirt is manufactured from hypoallergenic silicone rubber with upper and lower visor clamps made from black polyphenylene sulfide (PPS) and the 5-point head harness made from EPDM a natural rubber blend. The inner frame, buckles and buckle locks are manufactured from glass filled zytel. OTS Spectrum FFM is tested to a maximum diving depth of 164' (50 meters) per EN 250:2014. OTS Spectrum FFM is designed for water temperatures below 50 Degree (10 Degree C) and is suitable for cold-water diving applications. Ultimately, cold water performance is dictated by 2nd stage regulator being used. OTS Spectrum Full-Face Mask is tested for diving applications with breathing air per EN12021. OTS Spectrum Full-Face Mask has been tested per the European standard EN 250:2014. Mask comes with an owner's manual.

The Ocean Technology Systems (OTS) Buddy Phone D2 is a digital, micro-miniature, ultrasonic transceiver allowing communication between two or more scuba divers or surface stations. Using "Digital Signal Processing" (DSP) techniques, the Buddy Phone produces uncompromising speech clarity. The Buddy Phone D2 differs from OTS's standard Buddy Phone in that it is digitally controlled and has some fantastic new features such as: a voice menu to guide you adjust your Volume, change from channel A to Channel B or put the Buddy Phone in a continuous voice transmission mode.

Voice Menu: When you submerge with a D2 Buddy Phone, you will hear the voice system say "Buddy Phone ON, frequency A (B), channel one (four), volume High (Medium, Low)," depending on the prior dive's settings. Changing a setting is easy and can be done while underwater. Depress the Push-to-talk switch (PTT) three times quickly and hold the third depression until you hear "main menu - volume, channel, continuous transmit." When you hear the main menu selections, simply depress the PTT to select one of the choices. The unit will make the selection and go back to the receive mode. If you don't make a selection after the menu repeats twice, the D2 Buddy Phone goes out of the main selection menu and back to the receive mode (see operators manual for a more detail explanation. Note: continuous transmit mode allows the user to talk, hands free. This was requested by many movie makers and scientist who talk on camera often).

The D2 Buddy Phone has a Nominal Range of 165' to 1640.4' (50 to 500 meters), Transmit Output Power of 0.5 watts PEP, uses Standard Frequency Peak Envelope Power (PEP): Recall & Tone: Frequency A (Channel 1) 32.768 kHz USB, Frequency B (Channel 4) 31.250 kHz with an Audio Bandwidth of 300 to 3,000 Hz. The D2 Buddy Phones has an Automatic Gain Control greater than 80 dB, Ceramic Earphones with a Ceramic Cylinder Transducer, Uses the ME-16R Hot-Mic (Dynamic) or Super Mic (Standard) (Ceramic), is Powered by a 9 Volt Alkaline Battery (not included) with a Operational Depth of 130' (30 meters). The Buddy Phone is designed to be used with the OTS Guardian Full Face Mask (see SKU's: OTSGFM, OTSGFMBD2, OTSGFMEM, OTSSFFM). The Buddy Phones come with an owner's manual.

You paid hard earned money for your full-face mask. Why not keep it in a bag designed to store it like it is supposed to be stored. The mask bag was designed to help keep your mask in the right drying position, keeping water from pooling in your 2nd stage regulator. It also has vents to keep good ventilation helping to stop mildew and drain holes to let water drain away from the mask. Lots of storage pockets as well. One is a dry storage compartment! The bag has a carrying handle as well as a shoulder strap.