Pinnacle 7mm Cruiser Women's Full Wetsuit Package

The Cruiser provides a means to enjoy many of the features and benefits of Pinnacle's higher end suits while still maintaining a budget. The Cruiser incorporates many design aspects that are superior to those found in other suits costing more than twice the price. This 7mm wetsuit has titanium lined nylon-2 neoprene throughout the suit. Advanced stretch neoprene is elastic enough to make donning simple, yet resilient enough to provide tremendous warmth. Suit comes equipped with a 10mm thick spine pad that protects the back and reduces internal water movement for a warmer dive every time. Comfort and warmth are also increased with the rolled neck with hook and loop closure.

Suit has 8" (20.3 cm) gusseted ankle zippers for easy donning and doffing with smooth-skin sealing surfaces to increase warmth. If durability is what you are looking for the Pinnacle 7mm Cruiser has heavy-duty rough-skin kneepads for this critical wear area, printer rubber shoulder pads that protect diver and suit and help keep BCD in position. All seams are double glued and blind stitched, and suit has reinforcing stress disks at all seam intersections for added strength. Suit has a back zipper with pull tab leash or easy-entry and both the back zipper and ankle zippers come equipped with locking plastic sliders. This all black sleek suit is available in wide range of sizes, so there's a Pinnacle 7mm suit that will fit you!

Layering is the key to warmth when we scuba dive. By layering we breathe slower conserve our air supply allowing us to make longer and more enjoyable dives. Smart design pays big dividends in comfort with this multi-thickness hood. The thinner, oversized bib is made to tuck easily into wetsuits forming additional layering for a good seal and an overall anatomical shape that helps eliminate sags and air pockets.

The face seal can be trimmed-to-precisely matching your mask skirt seal. Make longer and more comfortable dives. Neo Sports by Henderson's 5/3mm vented bib hood, integrated vent allows bubbles to escape through the top of the hood without promoting water exchange. All seams are glued and stitched for durability and to limit water exchange. The hood body is made from premium nylon ll neoprene 7mm material with the bib being 5mm. The Hood is black in color and is available in multiple sizes.

These boots are deigned to be used with open heel fins. They are made from soft, nylon-2 neoprene and have a practical zipper from the sole to the ankle, making them easy to slip on and off. Water seepage is reduced to the minimum with a thin flap seal under the zipper, which acts as an effective barrier against any water that may seep through the zipper. Strong non-slip molding covers the entire sole. Reinforcements on the top of the foot and the heel provide protection against wear and tear. All seams are glued and sewn for a water tight seal and added strength. Boots are available in multiple sizes and thickness.

The Neosport 5mm Duratex Gloves are made from a premium nylon II neoprene material with tough Duratex palm and fingers for added strength and superior durability. The gloves are built-to-last with glued and sewn seams adding strength and warmth to the glove's construction. The premium 5mm nylon-2 neoprene glove has gator elastic hook-and-loop wrist closure for a custom fit. Gloves are available in multiple sizes and are black in color.

Underwater Kinetics was the first dive company to provide divers with a series of hangers designed specifically for diving equipment. The hangers had to be non-corroding, non-staining, sunlight resistant and strong enough to support the weight of wet dive equipment while remaining reasonably priced. The inspiration for the unusual shapes of these hangers came from divers who wanted to get their equipment off the floor, out of the sand and up the air for drying after a rinse in fresh water. The hangers turned out to be so rugged that most diving retailers used them to display equipment in their stores.

When the average hanger just doesn't cut it, rely on the Super Hanger. Underwater Kinetics knows your gear is often heavy and wet. So, they built the Super Hanger sturdy, with high quality non-corrosive materials. It holds more weight, so your valuable stuff won't end up on the ground. This sturdy non-corroding hanger will hold heavy wet suits and dry suits so that they can dry properly for the next dive. It keeps them off the floor to prevent damage.

The Super Hanger has one-piece I-beam construction for strength and can support up to 20 lbs. (9 kg) of weight. The hanger measures (L x W x H) 16.6" x 1.2" x 9" (42.16 cm x 3.05 cm x 22.86 cm) is made from non-corroding plastic resin will not rust, is available in multiple colors and is proudly made in the USA.