TUSA Crestline BCD Bundle with Underwater Kinetics Super BCD & Regulator Hanger

Make way for TUSA's fundamental buoyancy compensator, Crestline BC0602B. Designed for recreational use and travel, this BC is versatile and lightweight. The TUSA Crestline BC0602B is made from the durable 500/420-Denier Cordura material, which is tough and abrasion resistant. Utilizing a wraparound jacket design, this BC is perfect for divers of all skill level. BC0602B is equipped with TUSA's durable power inflator and O.P.E.V. dump valves which are located on the lower right-hand side and right shoulder.

This BC is Duo-Air Alternate Combo Inflator IR-3 Compatible (see SKU: TBTSS02), which is convenient for many divers who frequently travel. A safety whistle accessibly adorns the adjustable sternum strap, providing security and reliability. Uniquely designed hide-able sizing tag is located on the shoulder strap making Crestline an ideal rental or training BC. TUSA Crestline will be the best dive buddy for any diver.

TUSA's Ultimate Stabilizing Harness (USH) eliminates tank roll and delivers an amazing fit. The USH securely holds the air cylinder in place with optimally placed rails and brings the tank closer to the body increasing tank control while reducing weight. The Rite-Tite Buckle is a 2-position cam strap for quick and easy adjustment. While the strap is being looped through the buckle, the buckle stays in place without needing to be held. This allows for more control and stability. This feature is part of all TUSA BCJ's.

BCD has, 2-large hook and loop fastener pockets. Torso adjustable shoulder straps provide excellent comfort and adjustable waist strap with cummerbund provides precise adjustment of harness. All straps are equipped with squeeze-style side-release buckles for easy donning and doffing. The BC has 4-resin D-rings for attachment of accessory items. The BC has a lift capacity of 18 lbs to 45 lbs (8.2 kg to 20.4kg). BC comes with a 3/8" threaded low pressure quick-disconnect hose, and owner's manual.

Underwater Kinetics was the first dive company to provide divers with a series of hangers designed specifically for diving equipment. The hangers had to be non-corroding, non-staining, sunlight resistant and strong enough to support the weight of wet dive equipment while remaining reasonably priced. The inspiration for the unusual shapes of these hangers came from divers who wanted to get their equipment off the floor, out of the sand and up the air for drying after a rinse in fresh water. The hangers turned out to be so rugged that most diving retailers used them to display equipment in their stores.

Proper preventative maintenance is the best way to prolong the life of all your diving equipment. The hanger designed for holding a BC and regulator has been redesigned for versatility and ease of use. The original design required the diver to remove the dust cap of the regulator and screw the first stage onto the hanger. The purpose of this was to make sure that the regulator did not fall off. In the new design of the BC hanger an inverted T-hook is provided for draping the regulator hoses from the hanger while still providing resistance to slipping off onto the floor. The shoulder tips of the hanger are hooked upward to prevent the BC from sliding off as it would on a conventional hanger.

Finally, a hanger designed-specifically for holding a BC vest and regulator during drying and storage. The Super BC Hanger is also ideal for use with police vests, body armor and bulletproof vests. Due to its expert design, your gear fits on it easily, for a no-hassle drying and storage solution. The hanger measures: (L x W x H) 16 x 1.2 x 10" (40.6 x 3 x 25.4cm). The Super Hanger has one-piece I-beam construction for strength and can support up to 50 lbs (22.68kg) of weight. The hanger is made from non-corroding plastic resin will not rust, is available in multiple colors and is proudly made in the USA.