Dive Rite XT1 First Stage Only (No Hose) Din

The XT Regulator welcomes a new generation of regulator performance at Dive Rite. An elite performer, the XT's advanced, patented design earns top marks from Mike Ward of Dive Lab. The Dive Rite XT1 first-stage regulator with Five-3/8" threaded low pressure (LP) ports gives divers ultimate flexibility in hose routing. This is especially beneficial to the back mount technical diver where the need for a streamlined regulator configuration is required. It does not cause undue stress on the hoses.One of the 5 LP port is located on the top of the turret and is designed with safety and convenience in mind. The Port is slightly convex and slotted on each side to accommodate an 11/16" wrench for securing the turret while loosening the LP hose. This makes it easy to change the hose without concern of loosening the turret. The regulator comes equipped with 2 high pressure (HP) ports with 7/16" threads that are angled 90-degree from the DIN/Yoke fitting, which gives the perfect angle for hose routing.

Designed for the challenging world of technical diving, this regulator is pending certification to CE EN 250 and its approval for cold water 4,350 psi (300 bars) service, having passed the most rigorous of tests by Dive Rite.The balanced diaphragm, black chrome plated marine brass first stage regulator is inherently environmentally sealed. The benefit of this type of first stage design is that none of the delicate internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids. These environmental contaminants can cause corrosion and mineral deposits to form on the internal mechanism deteriorating regulator performance.

With the XT1 there is a secondary environmental diaphragm membrane that seals off the spring chamber keeping the first stage completely sealed off from the environment adding a second layer of corrosion resistance and prevention of freezing in cold water use. A pneumatically balanced design delivers gas at a constant pressure so work of breathing remains effortless independent of depth or tank pressure. The XT1 First-Stage Regulator is available in either DIN or yoke versions.