Share:
Dive Rite FT Advanced Open Water Regulator Package Din
SKU: DIVPK5800D MFR: PK5800-OW-DIN
$745.00
$774.95
Save: $29.95 (4%)OR
Includes Free Gift ($29.95 Value)
Scuba.com Round Regulator Bag
Key Features
- Dive confidently with this reliable Dive Rite regulator package, designed for open water adventures.
- Enjoy easy breathing at any depth thanks to the balanced diaphragm first stage regulator design.
- Customize your dive with the adjustable second stage, featuring inhalation and Venturi dive/pre-dive switch.
- Built tough with marine brass and ABS plastic, this durable regulator set will withstand harsh conditions.
- Nitrox compatible up to 40% oxygen, this regulator expands your diving possibilities safely and effectively.
- Compact size and included regulator bag makes this advanced open water regulator package travel-friendly.
Free Shipping
See Options
1
Overview
Compare
Specs
Q&A
About Dive Rite FT Advanced Open Water Regulator Package
The FT Advanced Open Water Regulator Package by Dive Rite offers a high-quality setup suitable for any diver. This package includes Dive Rite's FT1 High Performance Fixed Turret First Stage, a set of XT2 Balanced Second Stages, and a Mini Tech 2" Submersible Pressure Gauge (SPG), along with clips and necklaces.
The FT1 First Stage's fixed turret design enables streamlined hose routing, with the primary second stage routed under the diver's arm. The backup second stage is on a 22" flex hose with a necklace for quick access. A Mini Tech 2" Brass SPG on a 30" flex hose allows easy viewing, while a carrying bag ensures convenient transportation. Available in Yoke or DIN.
The FT1 First Stage, designed for open water, sidemount, or rebreather use, boasts a rugged construction and wear-resistant Sn-Ni plating. It features four low-pressure ports and two high-pressure ports angled 90 degrees for optimal hose routing. It's environmentally sealed to protect against corrosion and freezing, making it suitable for oxygen use with proper precautions.
The XT2 Second Stage offers excellent performance, with a work of breathing at less than 1.0 J/l. It features an ergonomic dive/pre-dive Venturi lever and a pneumatically balanced downstream valve for better performance at depth. Made of durable materials, it's cold-water ready and Nitrox compatible.
Included accessories are Dive Rite's Regulator Necklace, a high-flow angle adapter, and a marine-grade 316-stainless steel small swivel bolt snap. The Mini Tech SPG is easy to read, impact and scratch-resistant, and suitable for oxygen service. A Dive Rite Regulator Bag is also provided to protect and store your gear.
Dive Rite FT Advanced Open Water Regulator Package Features
- FT Advanced Open Water Regulator Package:
- Complete Regulator System w/SPG & Hardware
- Elite Performer, Patented Design
- Earned Top Marks from Mike Ward of Dive Lab
- Regulator Hose Lengths: 40" (102cm) & 22" (55.9 cm)
- Hose Threads: 3/8"
- Nitrox Ready
- Owner's Manual
- First-Stage: Dive Rite FT1 Regulator
- Elite Performer, Patented Design
- Fixed Turret 1'st Stage
- Nitrox Ready
- Industry Standard Oxygen Compatible Materials & Assembly Processes
- Suitable for Enriched Oxygen Gas Mixtures (1)
- Four 3/8-24 UN Threaded Low-Pressure Ports, Flexibility In-Hose-Routing
- Especially Beneficial to Back-Mount Technical Diver, Streamlined Regulator Configuration
- Designed w/Safety & Convenience In-Mind
- 2 HP Ports with 7/16-20 UNF/ISO 263 Threads
- All Ports Angled 90-Degrees, Perfect Angle for Hose Routing
- Balanced Diaphragm Design
- Wear Resistant Black SN-Ni Plated Marine Brass First Stage Regulator
- Environmentally-Sealed
- Delicate Internal Parts Not Exposed to Contaminants: Salt, Sand, Chlorine or Pool Acids
- Secondary Environmental Diaphragm Membrane, First Stage Completely-Sealed-Off
- Second-Layer of Corrosion Resistance & Prevention of Freezing In-Cold-Water-Use
- Pneumatically Balanced Design Delivers Gas at Constant Pressure
- Available-In DIN or Yoke
- (1) FT1 Suitable for Oxygen Use Only if Precautions Taken
Diver Must Use Oxygen Compatible Materials
Keep Regulator Clean from Contaminants During Assembly
Use & Open Tank Valve Slowly - Dive Rite XT2 Second Stage Only:
- Elite Performer, Patented Design
- Earned Top Marks from Mike Ward of Dive Lab
- Work of Breathing Less-Than 1.0 J/l
- Pneumatically Balanced Downstream Valve
- Ergonomic Dive/Pre-Dive Venturi Lever:
Easy-to-Adjust w/Gloves
Prevents Regulator Free-Flow - Materials Case & Cover: ABS Plastic
- Materials Internal Components: Teflon Coated Chromed Brass & Stainless Steel
- All Internal Moving Parts: Teflon Coated for Cold-Water Use
- Right-Hand Configuration w/40" (101.4cm) 3/8" Threaded LP Hose
- Octopus: Bright Yellow Front Covers for Easy Identification
- Dive Rite's Regulator Necklace:
- New Twist On-A-Tool Technical Divers Have Used for Years
- Keeps Back-Up Regulator Stowed Under Chin
- Made from Standard 3/16" (4.75mm) Bungee
- Necklace: Simple Alternative to Making Your Own
- Weight: 0.8 oz (23g)
- Made-In-U.S.A.
- Second Stage Right Angle Adapter:
- High Flow Angle Adapter
- Attaches-Between-Second-Stage & LP Hose
- Routing Hose Down-Diver's Chest and/or Under Arm
- Increases Comfort & Streamlines
- Low-Profile Design
- Not Omni-Directional Swivel, Maintains Angle, Won't Allow Regulator Flopping
- Weight: 1.8 oz (51g)
- Stainless Steel Bolt Snaps:
- Helps Streamline Divers Profile/Protect Environment
- 360-Degree Swivel Spring Loaded Gate Bolt Snap
- Ideal for Attaching Gauge or Regulator Second Stage
- Marine Grade 316-Stainless Steel
- Heavy-Duty Bolt Snap
- Designed for Saltwater-Use
- Swiveling Base for Ease-of-Connection
- Meticulously Inspected:
At Dive Rite's Factory
Ensures Smooth Edges
Spring Loaded Gates Open & Shut Reliably - Dimensions Lengths: Small 3" (7.6cm), Medium 3.5" (8.9cm)
- Hose Clip Retainer:
- Corrosion Proof Construction
- Materials: Elastic Bungee Cord & Plastic
- Great for Attaching Gauges & Regulators to Snap Bolts
- Simply Thread-the-Bungee Loop, Secure w/Tab
- Replaces Need for Cable Ties, O-Rings or Cave Line
- Attach Clips to Regulator & SPG Hoses
- Easily Removed for Reconfiguring
- Dive Rite Mini Tech Pressure Gauge:
- Tech SPG's Easy-to-Read
- Clean, Black & White Faces
- Dimensions:
Diameter; 2" (5.1cm)
Face Diameter; 1.75" (4.45cm) - Bourdon Tube Gauge Design
- Calibrated to 5000-psi In-100-psi Increments
- Tempered Glass Faces: Impact & Scratch Resistant
- Luminescent Dials: Easy to Read-In Low Light Conditions
- Suitable for Oxygen Service & CE Approved
- Durable Impact Resistant Rubber Boot
- Boot Equipped w/Eyelets for Attachment to Lanyard or Clip
- 7/16" Threaded High-Pressure Hose
- Hose Length: 30" (76cm)
- Regulator Bag:
- Protects Regulator System In-Transport & Storage
- Durable 600 Denier Polyester Construction
- Front Zippered Compartment, Ideal to Keep Spare O-Rings or Dust Caps
- Padded Top Grab Handle
- Zipper Closure
- Dimensions: 15 x 8 x 6" (38.1 x 20.3 x 15.2cm)
- Volume: 600 cu. in. (9.8 liters)
Warranty Information
This product has a limited warranty of 12 months.
http://www.diverite.com/service/warrantypolicy/
800-495-1046