




See Options
Need help? Ask our experts.
Review Summary
2023-09-05T15:02:57
Solid construction - have used it twice now. Good size - just wish the material where the zipper is was more stiff so I could easily unzip it with one hand. There were times when I had to use both hands - one to hold the fabric in place and the other to unzip.
CAROLYN M.
1,000-Denier Ballistic Nylon Fabric
Zippers
Utility Accessory
Yes, Nickel Plated Brass
Two 2" (50mm) Nylon Webbing Loops, Back of Pocket
24" (61cm), Looped Lanyard
10 x 6 x 2.5" (25.4 x 15.2 x 6.4cm)
150 cu. in. (2.46 liters)
3.8 oz (108g)
8796420073398
With lots of space and a lanyard for securing your valuable accessory items, the Dive Rite Vertical Zipper Pocket carries everything you need on a dive. Most dives require the need for carrying some type of accessory, such as a slate, safety reel, or cutting device. These accessories must be easily accessible and properly stowed when not in use. Adding thebellows vertical zipper pocketto your diving rig allows you to bring everything you need on a dive and takes the worry out of losing your valuable gear. Designed in a vertical fashion with a heavy-duty zipper on the short edge of the pocket, thebellows vertical zipper pocket requires less space on a waist strap yet still allows you to carry everything you need on a dive.
Need room for securing line markers, a safety reel, dive tables, extra clips, Jon lines, cookies, a spare mouthpiece, or a backup light; the bellows pocket comes with a 24" (61cm) looped lanyard attached to the inside of the pocket for attaching any piece of gear you need. No more fumbling for the right tools, just pull out the lanyard, unclip the tool you need, and stuff the lanyard and gear back inside the pocket. The bellows pocket has a large opening for easy access even when diving with gloves. Made with 1000 denier ballistic nylon and a Superfabric front that is tear and abrasion resistant and with a heavy-duty zipper closure, your gear stays secure in the pocket even when squeezing through a tight restriction or exploring deep inside a wreck.
It easily attaches to a backplate or harness system using two 2" (50mm) nylon webbing loops sewn to the back of the pocket. Just slip the loops over a standard 2" (50mm) webbing waist strap and secure the pocket in place. Nickel plated brass drainage grommets resist rust and corrosion. The pockets internal depth expands from 0.5" to 2.5" (1.3cm to 6.35cm) to accommodate slates, maps, dive tables, spare masks, reels, Jon-lines and lights. The Pocket measures (H x W x D) 10 x 6 x 2.5" (25.4 x 15.2 x 6.4cm) with a volume of 150 cubic inches (2.46 liters), and weighs 3.8 oz (108g).
http://www.diverite.com/service/warrantypolicy/
800-495-1046
Best Price Guaranteed + 5% OFF
Submit a price match
30/90 FREE Returns
Worry-free returns
Sell your Used Gear
Get started in 3 easy steps