Dry Case Waterproof Bluetooth Speaker

DryVIBES is a compact yet powerful waterproof Bluetooth speaker system that allows you to connect to your playlists while hanging by the pool or in the shower. Use the attached suction cup to mount DryVIBES to the front of your paddle board, to the windshield of your boat, or your bikes handle bars. DryVIBES also features a built-in waterproof microphone that doubles as a speakerphone, so you can take or make calls without ever touching your phone.

This waterproof floating designed Bluetooth speaker has an IPX67 waterproof rating. IP stands for Ingress Protection". An IP number is used to specify the environmental protection of enclosures around electronic equipment. These ratings are determined by specific tests. The IP number is composed of two numbers, the first referring to the protection against solid objects and the second against liquids. The higher the number, the better the protection. The six represents total protection against dust while the seven represents the protection against the effect of immersion in water between 6" and 39.4" (15cm and 100cm) This internationally recognized rating means the following: Protected against heavy seas/temporary flooding - Water projected at all angles through a 0.5" (12.5mm) nozzle at a flow rate of 6,102 cubic inches (100 liters) per minute at a pressure of 14 psi (100kN/m2) for 3 minutes from a distance of 10' (3 meters).

This pretty much bulletproof speaker system has a built-in lithium-ion rechargeable battery that can be charged with the included USB charging cable with a charge time of 3 hours and will give you 6 hours of run time. The speaker is compact measuring 3.25" (8.26cm) in diameter, is a Bluetooth version V: 3.0, with a frequency of 100Hz-20KHz. The speakers distortion is 0.5%, signal-to-noise ratio 85+2db, loudspeaker output is 40hms 3W with an RF range of 33' (10 meters). Speaker comes with an owner's manual.