Top Rated Gear

7.25" Tank Boot for Aluminum Flat Bottom Tanks

SKU: AQUTB725 MFR: TBX7A
$14.00

Key Features

  • Protect your scuba tank with this durable 7.25" tank boot, designed for flat bottom tanks.
  • Ensure your aluminum tank stays put; this reliable boot adds stability on any surface.
  • This tank boot is compatible with standard 7.25" diameter aluminum scuba cylinders.
  • Easy to install, the tank boot provides a snug, secure fit; no tools required!
  • Enhance safety by preventing scratches and damage to your scuba tank during transport.
  • Get the best value! This tank boot offers essential protection at a reasonable price.
See More Product Details
Calculate Shipping

See Options

1

Need help? Ask our experts.

Overview
Compare
Specs
Q&A

Questions & Answers

Shopper : Do you have o soap it up to get on? Mine is not sliding onANDREW S : It was a little tight fit I just got it to sit on bottom of tank then lifted tank and lightly pound it on to the tank a few times and was good. They get a little hard to take of when you need to go for a Hydro. Use a rubber hammer and lay sideways and tap as you work your way around the tank.JOHN M : No, actually, sit the tank boot on the floor. Pick up the cylinder by the valve and lightly drop it down onto boot. It usually will begin to search itself then repeat lightly until seats itself to full depth.DREW P : I did not use soap. It was very snug fit so it won't fall off. I used weight of tank to "tap" it on.DENNIS R : I filled my sink up with the hottest tap water I had, soak the boot for several minutes, then quickly put in on the floor & dropped the tank into it.THOMAS C : No, mine just slid right on.
Shopper : Why does the tank boot have a design on the bottom of the boot that looks like it has spokes of a wheel?Michael R : Drainage so as not to hold water between the boot and your cylinder which one, could be a pain if you were thinking it was dry and you lay down your cylinder only to have the water leak out all over. Over time if you were to store it, might not be good on the tank if you were to store it with the water in there for long periods of time. Structural strength might be another reason for that particular design you speak of.JEN S : To allow any accumulated water to drain and the tank to dryMICHAEL L : Simple reinforcementsKATELYN G : The boot can be hard to get off sometimes and you have to let the water drain out of the bottom as to not rust.LEON R : So when you lie the tank on its side it don't rollMICHAEL H : A creative way for any water to drain out.
Robert C : what is the outside diameter of a) the round plastic bottom and b) the plastic hex part?VINCE C : Hex is 8" and outside boot about 7.5"
Shopper : will it fit on 100 HP steel tank?ROBERT H : As long as you don't have a 8" steel tank, it will fit.YAN G : This boot is for flat bottom aluminum cylinders. For HP Steels with a rounded bottom, you need this boot: <a href="http://www.leisurepro.com/p-xsstb725s/" target="_blank">http://www.leisurepro.com/p-xsstb725s/</a>JEAN MARC H : There are 2 sizes of 100cf HP. 7.25 and 8. Most of them are 7.25 so probably are yours. Then Yes it will fit.GARY A : Measure the diameter of your tank at the bottom and compare to the dimension of an aluminum 80 tank. If it is the same, it will fit.
Shopper : Will this fit a steel HP100 tank that is also 7.25" in diameter?Michael R : I am not entirely sure about the bottom of the tank you are referring. I believe your cylinder has a round bottom. This is made for the flat bottom aluminum cylinder. That being said, i think the fit wouldn't be to good and it may not stay on or you might run the risk of losing it.MARVIN S : Yes.

Reviews about this item

Review Summary

2024-04-30T08:36:03

Rated 5 out of 5

Perfect Fit

I put these on every tank I own. Why try other brands when this one works perfectly.

Benjamin W.

2022-03-16T15:47:27

Rated 5 out of 5

Nice boot

Great boot works well

JAMES C.

2021-12-26T19:00:00

Rated 5 out of 5

7.25" Tank Boot for Aluminum Flat Bottom Tanks

MarkL

2021-10-17T09:42:12

Rated 5 out of 5

Tank boot

These really help protect the tank and whatever it may hit, boat, car, hard ground.

Gary W.

2021-10-13T14:54:40

Rated 5 out of 5

Nice tank boot.

Very nice boot. It fits my new tank well.

ROBERT F.

2021-07-08T20:00:00

Rated 5 out of 5

Tank boots arrived unscathed. Tanks arrived with huge gouges in the aluminum tanks due to shippin...

No worries. Support team resolved the issue in a timely matter with great communication and help.

MichaelM

2019-11-02T15:00:44

Rated 5 out of 5

Tank boot

Good boot!!,

Kent M.

2019-09-02T12:51:55

Rated 5 out of 5

Great protection for the tanks and keeps them from rolling

Great product. Just as described and fit the tanks perfectly.

Eric L.

2019-08-13T14:03:13

Rated 5 out of 5

tank boots

fit fine and helps to stabilize rolling tanks in back of truck

James H.

2018-11-27T13:09:41

Rated 5 out of 5

No regrets - Nice boot

Great quality and easy to install.

William K.

2018-10-22T13:24:34

Rated 5 out of 5

Convenient

Hard to find item, thank you

Jessica L.

2018-02-28T10:30:04

Rated 1 out of 5

Doesn't Fit

Could not install it even with a hammer; which I didn't even like trying.

Larry P.

2017-10-24T08:47:41

Rated 5 out of 5

Works perfectly

Put it on the floor and seated my 80cf Aluminum tank on top, pushed lightly and it went on easily but stays on firmly. Looks well made. I would buy more.

MARK B.

2017-10-10T12:01:01

Rated 5 out of 5

Good boot

If you are going to dive and do not want chase your tank all over the boat I would suggest you get them if mounted right they will keep your tank in place

FRANK D.

2017-07-19T19:32:13

Rated 5 out of 5

Right Piece - Right Price

Does what it needs to do...it protects the bottom of the tank when standing up and keeps it from rolling when placed flat on the ground.

STEVEN H.

2017-05-12T20:00:00

Rated 5 out of 5

Yellow tank

Wouldnt own a tank without one. Not only does it protect the finish, but it keeps tanks from rolling around in the back of the trunk.

WilliamH

2017-04-20T09:04:47

Rated 5 out of 5

Pay now or pay later

Fits right on a 80cf alu cylinder. Grab a mallot and tap it on. Pretty easy and cheap protection for your cylinder

Edward M.

2016-12-26T08:18:44

Rated 5 out of 5

A must have

I think this lil item is a must have for anyone who has nice tanks. Even when i purchased my cylinder, the dive shop had moved it around and set it on the concrete ground. So there are a few ugly scuffs scratches and other blemishes on my brand new Candy Red aluminum cylinder. But i will not add anymore to it with this lil guy down there protecting the bottom of it. Seems to be a good snug fit and appears to be durable and rugged so my cylinder will stay pristine.

Michael R.

2016-05-04T20:00:00

Rated 5 out of 5

Sherwood Tank Boot for Aluminum 80 and 63 Cubic Foot Tanks Review - Scuba Gear Reviews

When there are kids around it comes in handy. Good quality. Fit perfectly.

RaymondJ

2015-08-25T20:00:00

Rated 5 out of 5

Great product

Fast ship, good shipping price.

ROBERT Q.

2015-08-02T20:00:00

Rated 5 out of 5

Nice

Always on time

Val P.

2015-07-21T20:00:00

Rated 5 out of 5

I would buy this again

Got this for my sons luxfer al63 and it fits snug so it should not have problems slipping off like a few I have seen.

Big M.

2014-06-12T20:00:00

Rated 5 out of 5

Inexpensive and Durable

Excellent piece of gear at a great price.

RICHARD M.

2014-03-23T20:00:00

Rated 5 out of 5

Good protection

All of my tanks have a boot. Thos protects the boat floor.

Capt M.

2013-12-08T19:00:00

Rated 4 out of 5

Great product!!

Great product, fits my AL 80 perfectly. Make it easy to move the tank around, no more worries you are going to damage your tank, your car or floor tiles inside the house.

Kenly

2012-09-23T20:00:00

Rated 4 out of 5

Just What the Tank Needed

Tank boot was easy to put on and now it is securely attached to my AL 80.

Agilulfo

2012-05-02T20:00:00

Rated 5 out of 5

Protects very well

Protects the tank and the floor, also reduces the tanks tendancy to roll.

greig

2012-03-26T20:00:00

Rated 4 out of 5

I like the headline

I put these tank boots on all of the bottles I have to protect the bottoms of the bottles. I utilize the center hole in the bottom of the boot for the vis sticker. it is always protected and isn't partialy coming off or damaged so it's not in question when I need it filled. Plus it also helps to keep the bottles from rolling around.

Merk

2011-12-12T19:00:00

Rated 5 out of 5

It's black

I had to run it under warm water to soften it up to get it on. Once on its fits great, looks good, works as advertised. Do they make these in colors other than black?

bullet

2011-04-09T20:00:00

Rated 5 out of 5

Great item!

Great item, keeps my tank from rolling around on my my boat.

Euphoria

7.25" Tank Boot for Aluminum Flat Bottom Tanks Specifications

  • Material

    Plastic

  • Cylinder Size

    Diameter: 7.25"

  • Flat or Round Bottom

    Flat

  • Shape

    Hexagon

  • Drain Ribs

    Yes

About 7.25" Tank Boot for Aluminum Flat Bottom Tanks

FEATURED REVIEWS

Perfect Fit

By Benjamin W.

I put these on every tank I own. Why try other brands when this one works perfectly.

Nice boot

By JAMES C.

Great boot works well

Protect your Cylinders bottom form dings, nicks and dents with this self-draining tank boot. Boot will fit most aluminum 63 and 80 cu. ft. flat bottom cylinders. Boot has hexagon outer lip to prevent the cylinder from rolling when lying down. Boot is made from corrosion proof plastic material.

7.25" Tank Boot for Aluminum Flat Bottom Tanks Features

  • 7.25" Diameter Tank Boot
  • For Aluminum Flat Bottom Tanks
  • Protect Cylinder Base from Damage
  • Internal Ribbed Self-Draining Design
  • Hexagon Outer Lip Prevents Rolling
  • Corrosion Proof Plastic Construction

Key Features

  • Protect your scuba tank with this durable 7.25" tank boot, designed for flat bottom tanks.
  • Ensure your aluminum tank stays put; this reliable boot adds stability on any surface.
  • This tank boot is compatible with standard 7.25" diameter aluminum scuba cylinders.
  • Easy to install, the tank boot provides a snug, secure fit; no tools required!
  • Enhance safety by preventing scratches and damage to your scuba tank during transport.
  • Get the best value! This tank boot offers essential protection at a reasonable price.

What's in the box:

  • 7.25" Tank Boot for Aluminum Flat Bottom Tanks