"Scuba All-In-One Tool"

2023-03-06T04:29:23

a good tool to have while traveling.. all in one back up... it has all the tools needed for a quick operator level adjustment.. I still use regular tools in the shop.. but a good vibe comes from having this in my save a dive kit..

william f.

2016-05-17T05:42:25

Many products are represented as "stainless steel." Be aware that this claim is useless unless the MINIMUM allow is 18-8. The Chinese products such as this, dishwasher, refrigerator panels and most all products are an inferior low nickel alloy , unsuitable for salt (or any) environment exposed to even light humidity. Verify the alloy to be Type 304, 316, 18-8 before purchase. However - if you have low expectations, this tool will function for quite some time rusted.

EDWARD M.

2016-04-16T12:56:07

Yes, the thing is cheap, made of inferior grade slag and will probably give me lock jaw somewhere down the road as it transforms back into iron ore, but if it's sprayed with marine silicone and kept in a 25 inch of mercury vacuum it will do what it's supposed to. I disassembled this "tool" with two special tools (two phillips screwdrivers), removed the bits and tensioner, reordered them so the spanners are on the outside, reinstalled the tensioner and spindles and PRESTO. It works on all my various hose diameters (except the SUUNTO pod (larger than 11/16) which requires my modified (cut to half thickness with an angle grinder) adjustable crescent wrench). Why did they put the wrenches where they did? Because there's no diving in Taiwan? Oops, forgot, it IS an island nation. Well, maybe it was manufactured by clever people who gave us all the unique challenge of reordering the multi-tool to our own personal desires and needs.

GLENN B.

2015-10-07T20:00:00

Definitely having a tool like this is a must. But this one will DEFINITELY rust when/if exposed to salt water & air. Shame they mislabel this as ss. There's no way anyone can offer something like this at such a low pricepoint using proper 420 stainless.

Drewdive

2013-12-04T19:00:00

An absolute must-have tool for any diver. Dive equipment can break at any time. I have owned this tool for many years and given it as a gift to my dive friends. I've needed it on more than one occasion to make a quick repair and get me back in the water. There's nothing for infuriating than flying thousands of miles, spending hundreds of dollars on a much anticipated dive trip, and then sitting helpless on the dive boat because a $2.00 busted O-ring can't be removed and replaced without the right tool.

The I.

2013-02-21T19:00:00

whole thing is to bulky and cant be used for reg adjustments.

Pavel

2012-08-31T20:00:00

Put this in my dive bag for one week and it rusted and froze up. Not real stainless steel.

terry

2010-02-17T19:00:00

Must have in your tool kit.

oldcatawba

2010-01-20T19:00:00

Heavy duty tools, despite of its weight kit is very usefull and tools really fits the scuba equipments very well.

Celuzy O.

2009-08-05T20:00:00

The first time I had it out, 3 people used it. Handy little tool

MIKE W.

2009-07-17T20:00:00

Two out of four wrench heads are totally useless since they are set too deep in the handle. The result is that you cannot use them to screw in the hose into the first stage (which gets in the way). You cannot flip it and change the direction since it will work to fold the wrench... To be fair: you can unscrew the hose out of the first stage just fine. I am not sure you can visualize that without a picture but the bottom line that the tool is useless in its basic function. It also lacks a blade.

Michael T.

2009-06-19T20:00:00

The spanners are in the middle so the housing catches against the first stage.will only work in one direction. Dammaged the flats on the hose nuts.

CHRISTOPHER D.

2009-02-18T19:00:00

The allen wrenches and screw drivers work ok. But the wrenches are not easy to use due to the design of the tool. Hoses are not accessible due to the bulkiness and stoutness of tool, and the wrenches don't lock in place, so they collapse without turning the nut. I was not able to remove any reg hoses with this tool.

SUSAN S.

2009-01-20T19:00:00

This is just one tool I have in my Backup kit. You have to start with some basic tools, and this is a good one to start with.

NEIL M.

2008-09-05T20:00:00

Works fine - fits everything that I own.

WEBSTER R.

2008-08-06T20:00:00

Is not universal. Was not compatible with my hoses at all. Had to bring a small crescent wrench on the dive.

ROBERT J.

2008-07-05T20:00:00

The wrenches on this tool are too short and close to the body of the tool. I wasn't even able to get a grip on my high or low pressure hoses because the tool is so bulky and hits the first stage. Also, the tools do not lock in place so they have the tendency to collapse in when working with them.

NATHANIEL H.

2008-05-13T20:00:00

Needed to reverse hose positions for regulator on vacation in Aruba when I had to flip it to fit properly on their tanks These changes went smoothly on the boat in no time thanks to this effective tool. The wrenches fit various hose sizes perfectly.

Stan

2008-03-21T20:00:00

Definitely a cost effective and reliable tool to have with the rest of your dive gear.

Nancy

2008-01-29T19:00:00

1) Why do I need two identical wrench ends on each end of the tool? 2) Neither of the wrenches fit any the high or low pressure hoses on my reg (aqualung) or gauges (OMS)

ChrisN

2008-01-27T19:00:00

Great for adjustments at diving site; useful multi-tool.

Ray

2007-10-09T20:00:00

This tool is amazing. I have used it several times, and let friends use it several times. I used it on the first dive I owned it. Things happen with diving and you need tools, this has the most common tools needed to repair equipment at the dive site, so that you can hopefully get back in the water.

JANE M.

2007-09-24T20:00:00

Handy for repairs on the go.

NitroxAZ