Top Rated Gear

EZ Spring Fin Strap, Black Small

SKU: AQUEZGTSBK MFR: RB4611
$59.95

Key Features

  • Upgrade your scuba fins with our durable EZ Spring Straps for easy on/off convenience.
  • Enjoy a secure, comfortable fit with adjustable fin straps, perfect for any dive adventure.
  • Stainless steel spring fin straps resist corrosion, ensuring longevity and reliability underwater.
  • Rubber grip tab on these fin accessories makes adjustments simple, even with thick gloves on.
  • These innovative scuba fin straps fit 'old school' fins, enhancing your diving experience.
  • Choose the right size EZ Spring Strap for optimal power & propulsion in the water.
See More Product Details
Overview
Compare
Specs
Q&A

Questions & Answers

JEFF C : How big is the wire piece that attaches to the fin. The rubber piece on my fins is 1" inch wide. Will the wire ends of this spring strap fit into a 1" wide rubber piece?CHARLES G : jeff, sorry they were not adaptable to my 30 year old jet fins; had to return them. i have found two solutions for replacements. 1) use rubber fin straps instead of the plastic which do not stretch. the rubber allows easy on/off 2)just returned from cancun, a dive master had two simple bungee cord attached to each fin ( in case one broke). i wish i had taken a photo. about 1/4 inch in diameter attached with dual zip ties on each) was searching for these bungee when i saw your question. mikeERIC W : Yes it will. I'm using them with XS Turtle fins.LARRY S : I used them on a pair of Scubapro Jetfins. The rubber piece on it is 1" wide also, so yes, it'll fit. You just insert one end and use a pair of pliers to clamp the other end into place if I remember right.
TERRY O : On this extra large spring fin strap what is the length of the spring?Shanon M : I am not a hundred percent sure of the length but to give you some perspective I have a size 10 dry boot shoe. I use 2xl turtle fins to have the larger foot pocket and I used a small spring strap and everything held snug and comfortable. Hope that helps.FREEMAN I : 13 inchesDONALD A : 12 inches at rest; about 20 inches fully extended.
SAM E : My wife wears a size 8 shoe and wears dive boots. What size would fit? Fins are Scubapro jet, size large.ANDREW M : My wife wears size 7 or 8 and we ordered large for her. Hope this helps.Ruth Elizabeth M : I wear dive boots size 7 rigid sole(Mares Trilastic 5mm Dive Boots) and size L scubapro jet fin; If only part of your heel is outside the fin, this strap (size S) wouldn't help you. if the third part of your feet is outside maybe size S would help youTHOMAS V : Don't know. However, I took some butchers twine and with my boots and fins on I tied one end of the twine to the point where the end of the strap attaches to the fin. Pulled the twine around the back of the boot to the other attachment point. Then measured the length of the twine and ordered the strap that fit that length. Hope this helps.
Peter R : I have a large jet fin I wear a 3mm boot size 10 what size springs should I buy?GEORGE M : XL
GLENN R : Read somewhere that these will work with Mares Avanti Quattro fins with plastic knobs. It says "To Install on Fins simply Insert the Solid Cable Wire into the Knob Holes and Squeeze together with Pliers" The knobs do not have holes in them. Still OK?WILLIAM MCGOWAN I : No. These straps are for fins with strap holes e.g. Scuba Pro Jet Fins.

Reviews about this item

Review Summary

2022-05-10T12:28:19

Rated 5 out of 5

Jetfin Spring Straps

Love the new spring straps for my Jet Fins. Exactly what I was hoping for to keep me diving comfortably into my 70?s

GEORGE P.

2018-12-04T17:28:45

Rated 5 out of 5

Happy camper

They are great when I can get my fins on. Not your fault I have large feet and having the right boots to ware with my dry suit.

RICHARD S.

2018-11-10T19:00:00

Rated 5 out of 5

Very comfortable

With these starps it is very easy to get your fins on and off

WilliamS

2018-06-22T03:25:18

Rated 5 out of 5

Great for jet fins

These are great. Easy on and off and fit perfectly. My friends don't have these and they often struggle getting them on or off. My worry is if they get these straps we won't know whose fins are whose??

Todd A.

2017-09-13T21:18:21

Rated 5 out of 5

The best.

I've researched many fin straps, and this is the best. Everything has held up without fail for over a year of hard use, and it's unbelievably comfortable. Unlike the spring alone, or even the covered spring, it's a breeze to take the fins off in heavy seas, which makes a big difference in avoiding a pounding on the boat ladder or shore.

Andrew L.

2017-06-11T08:57:20

Rated 5 out of 5

Fits great

I followed the directions in selecting the proper size and it fits great. No problems with it slipping and it's easy to get on and off.

LARRY S.

2016-08-23T10:36:45

Rated 4 out of 5

Work Great!

This is my second set. They install easily, and work great. I would give 5 stars, except the previous pair I had the rubber loop broke after a few years. So I think 4.5 stars.

DAN B.

2016-04-01T09:43:40

Rated 5 out of 5

great product!

Very easy to install I put then on an old pair of Scubapro sea wings, very secure. The only pain was removing the old straps after that installing the EZ straps was a breeze.

Chad W.

2014-08-03T20:00:00

Rated 5 out of 5

A superb product.

I sent you my critique three weeks ago on why these spring straps are vastly superior to the traditional flat rubber straps they have replaced! And, I have already recommended them to a "Duckfeet"-owning buddy back in NJ.

Doug S.

2014-07-21T20:00:00

Rated 5 out of 5

we like em

they were put on a pair of SP Jetfins. this is the second set of these things we have bought. the other pair of straps has 200+ dives and are working as promised. good product, easy to install.

ALBERT W.

2014-06-23T20:00:00

Rated 4 out of 5

Quick and easy improvement to my Jet Fin

Was very easy to install on my Scubapro Jet Fins. Makes putting on the fins much easier but is most useful for removing the fins during rough exits

Fishmick

2014-02-17T19:00:00

Rated 4 out of 5

Great fin strap

I used this with my Aqualung Rocket fins. Very easy to install, and works very well. Easy on and off. Great Purchase!

Steve

2014-02-09T19:00:00

Rated 5 out of 5

Great Spring strap

Bought this to use on my Aqualung Rocket Fins. Fits great and works well. Easy on and off. This is a good purchase and I highly recommend it to anyone using the old style rocket fins. Just make sure you purchase the right size as they come in different sizes.

Steve

2013-12-19T19:00:00

Rated 5 out of 5

Great product

excellent experience with Leisure pro

saxcop

2013-12-15T19:00:00

Rated 4 out of 5

A Diving Neccessity!

Spring straps are a most useful dive accessory! You can forget breaking a strap just before a dive, plus they are generally easy to get on and off. That being said, there are some drawbacks. First and foremost, if you change the type of boot you wear, you may have to change the size of the fin strap. Secondly, the molded pull loop is not as strong as it should be and a strong pull will cause it to break. That's not a fatal flaw, as the straps work fine without the loop; they are just a little harder to get on or off. By all means, MEASURE your fin and boot combination before you order. You will get perfectly fitting straps!

Instructor A.

2013-10-26T20:00:00

Rated 1 out of 5

As I said, they're junk! Wk spring stl

Sweeping kelp from heel, my finger caught spring strap and stretched it out to where I almost lost my fin, and my Jet Fins were out of commission for the last 3.5 days of 4-day lobster trip.

Bugsy

2013-08-01T20:00:00

Rated 5 out of 5

Sizing Note

The sizing measurements for the Grip Tight version used on conventional rubber Jet fins are overall from installation pin to pin, not from barrel lug to barrel lug. Don all of your foor gear including fins, get the fins on as far as possible. Consider using soapy water. Measure between the installation points with a fabric tape. Buy a size 1-2 inches shorter so there will be some tension. Remember that fins will further seat as you dive deeper and your booties compress.

Spectrum04002

2013-03-11T20:00:00

Rated 5 out of 5

Spring Strap for Vintage ScubaproJet Fin

The size ordered was exact for my fit.

Dalam P.

2012-12-24T19:00:00

Rated 5 out of 5

Quality made peice of dive equipment

I purchased the EZ spring fin straps for use with a heavy dry suit with xx-large boots. The springs hold the fins in place with just the right amount of tension and are easy to put on and take off.

Lars d.

2012-11-24T19:00:00

Rated 5 out of 5

Great idea, super easy!

Upgraded my old Turbo Flex Fins, Awesome!

summitpush

2012-08-09T20:00:00

Rated 5 out of 5

Neat Invention!

Excellent service!!!

Sharkman4928

2012-08-08T20:00:00

Rated 5 out of 5

Jet Fins (XL) and EZ Springs (M)

I would recommend these to any person who owns a pair of ScubaPro Jet Fins. As a tip, for a person with a size 10-10.5 male shoe, a medium pair of these and a XL pair of Jet Fins make the perfect duo!

Jeff

2012-08-05T20:00:00

Rated 5 out of 5

A HUGE buy for my Jet Fins.

A fast delivery with great service.

That G.

2012-06-13T20:00:00

Rated 5 out of 5

Works fine,Last a long time

I ordered a large size strap to put on a set of XL size scubapro jetfins. I have a size 10 boot. They work great with both my wet suit boots and my larger dry suit boots. I am on a professional dive team and we all are using spring straps of various price ranges. These seem just as good as the more expensive ones.

Scuba M.

2012-05-15T20:00:00

Rated 5 out of 5

More Economical Fin Straps

I used these spring straps in place of the more expensive OMS spring-straps.

PADIPRO

2012-04-17T20:00:00

Rated 5 out of 5

Great Upgrade

I'm a size 9.5US, I got the medium size for my large jetfins and they fit perfectly over 5mm booties. The straps make it so much faster and easier to wear the fins. Installation was really quick. The hardest part is to get rid of the original fins' buckles, but once that's done, it takes no more than a minute to attach the EZ straps. I personally wouldn't bother with the more expensive alternatives.

Max

2012-02-27T19:00:00

Rated 5 out of 5

Great spring straps

There are very simple but well designed spring straps that I use on my OMS Slipstream fins. The run a bit large so you may need to get one size smaller. Great for cold water diving with thick gloves or warm water diving. Works for any location and makes putting fins on a breeze.

macado

2012-01-02T19:00:00

Rated 5 out of 5

Excellent product

good fast delivery

Rich

2011-12-10T19:00:00

Rated 5 out of 5

Great product, inexpensive and well made

I'm a size 11shoe and wear Large fins, so I ordered Large springs. Probably should have gone with a medium spring to get a little more tension on the heel of my boot. Can't beat the price though.

E d.

2011-10-04T20:00:00

Rated 5 out of 5

great and easy

Great and easy awesome

dive g.

EZ Spring Fin Strap, Black Specifications

  • Material

    Stainless Steel With Rubber Cover

  • Buckle Style

    Use On "Old School" Fins With Rubber Attachment Knob

  • Grip Tab

    Yes

  • Overall Dimensions

    Small: 11.75" (29.8 Cm), Medium: 12.75" (32.4 Cm), Large: 13.75" (34.9 Cm), X-Large: 14.75" (37.5 Cm)

About EZ Spring Fin Strap, Black

FEATURED REVIEWS

Simply the best!

By pelsung

I've tried about five different spring heel straps. These are absolutely the best ones.

Sizing Note

By Spectrum04002

The sizing measurements for the Grip Tight version used on conventional rubber Jet fins are overall from installation pin to pin, not from barrel lug to barrel lug. Don all of your foor gear including fins, get the fins on as far as possible. Consider using soapy water. Measure between the installation points with a fabric tape. Buy a size 1-2 inches shorter so there will be some tension. Remember that fins will further seat as you dive deeper and your booties compress.

These unique EZ Stainless Steel Spring Fin Straps are guaranteed to make putting on and taking off your fins easier and include rubber "comfort grip" puller. The rubber comfort puller provides a cushion between the spring and divers heel and provides a large grip to aid in pulling fin straps on and off. The straps will fit old school" fins with rubber attachment knob molded into the fins such as Scuba Pro Jets, XS Scuba Power, XS Scuba Turtle and others (see SKU's: SCPFJ, XSSFP, XSSFTE). To install on fins simply insert the solid cable wire into the knob holes and squeeze" together with pliers.

Easy to use springs automatically compensates for different size feet and boots. Spring fin straps are depth compensating because they will compress to changes in the thickness of your boots. No need to adjust straps once you have descended to depth or once you ascend to the surface at the end of the dive. These corrosion resistant black fin straps come in multiple sizes. Below is a list of the actual fin strap sizes:

Small: 11.75" (29.8 cm)
Medium: 12.75" (32.4 cm)
Large:13.75" (34.9 cm)
X-Large: 14.75" (37.5 cm)

EZ Spring Fin Strap, Black Features

  • EZ Spring Fin Strap, Black:
  • Corrosion Resistant Stainless Steel
  • Fits: Old School" Fins with Rubber Attachment Knob
  • Models:
    Scuba Pro Jets, XS Scuba Power, XS Scuba Turtle & Others (see SKU's: SCPFJ, XSSFP, XSSFTE)
  • Easy to Install
  • Comfort Grip Puller
  • Rubber Comfort Puller Provides Cushion-Between-the-Spring-and-Divers Heel
  • Large Grip to Aid in Pulling Fin Straps On-and-Off
  • Springs Automatically Compensates for Different Size-Feet and Boots
  • Depth Compensating: Compress-to-Changes in Thickness of Boots
  • Available in Multiple Sizes to Choose for Custom Fit

Key Features

  • Upgrade your scuba fins with our durable EZ Spring Straps for easy on/off convenience.
  • Enjoy a secure, comfortable fit with adjustable fin straps, perfect for any dive adventure.
  • Stainless steel spring fin straps resist corrosion, ensuring longevity and reliability underwater.
  • Rubber grip tab on these fin accessories makes adjustments simple, even with thick gloves on.
  • These innovative scuba fin straps fit 'old school' fins, enhancing your diving experience.
  • Choose the right size EZ Spring Strap for optimal power & propulsion in the water.

What's in the box:

  • Pair of EZ Spring Fin Strap