Excellent value, I had more expensive converters. This does the same job for a lot less $$
Great Value and quality
By
DALE T.
-
Honolulu, HI, US
Great value worked a treat...
You like to dive high pressure cylinders because you get extended bottom time and can use less weight on your weight system, but you also know when you're on vacation not all resorts or dive boats have DIN cylinders readily available. With this Aqua DIN to Yoke Adapter in your regulator bag, you can connect your regulator to cylinders with yoke style valves. This is a must have for divers who travel and want to use their own regulators instead of renting from the locals. The Aqua DIN to Yoke Regulator Converter is made from durable corrosion resistant chrome plated brass with a durable impact resistant plastic easy grip yoke screw for mounting on a yoke valve.
Shopper
I just need the yoke screw knob do you sell just that?
darrick c
Hello, if you e-mail repair@scuba.com with your billing, shipping address and the items you are looking to get they would be able to special order this for you.
SCOTT B
Does it come with a dust cap?
YUVAL T
No, it does not. You can however add your own...….
CARL T
No, it does not
ROBERT F
no, but you can use your cap off your reg.
DALE J
No. As pictured.
PAUL P
No it does not.
REID W
It does not come with a dust cap. However, your DIN First stage should be set-up with an attached dust cap which can be used with this adaptor.
Shopper
Can this be used to fill tanks?
Michael M
No
HENRY S
Yes it can. Just be sure to use the proper schedule fittings as you are dealing with extremely high pressures.
CHRISTOPHER C D
This can be attached to a DIN fill whip
AD K
Yes, it can be used to fill tanks
STEPHANIE P
No. It’s a 1st stage regulator converter, meaning “air out” only. You need a DIN to Yolk valve adapter (which screws into your DIN Tank valve) in order to fill.
RAJI A
I dont get the question. I use this device with my DIN regulator so that it connects to a yoke tank. If the filling tank is a DIN and you are filling a yoke tank ( a very unusual situation) I guess you can use this adapter but I have never encountered this so one cannot be sure.
Shopper
Is it O2 and/or EAN40 safe? thanks
Michael M
Yes
NATHAN C
This is just an adapter for a DIN 1st stage to attached to a yoke tank. That woukd be dependent on the 1st stage you are using.
TIM S
Unknown. Would check with the manufacturer.
STEPHANIE P
I bought it specifically to take on a live-aboard in the Bahamas that offered Nitrox, I never had any issues with it. I hope that helps.
RAJI A
Don’t really know. I only used it for air.
MICHAEL P
Yes
Todd S
I bought this device for my DIN Reg. Hooked it up and tested it out. It didn't seal. Did I miss the part about buying O-Rings with it? I got the "buy a dust cover" for it.
RUSSELL Y
My yoke adapter does not have an "o". The yoke valve on my Al 80 has a small "o" ring that the adapter seats against. I had the same problem a couple of years back at a Scuba Caribe dive operator in Jamaica. I had to use the adapter to mount my DIN to a Yoke valve. The yoke valve was missing the an "o" ring. I always carry an assortment of "o" rings so the problem was fixed. Hope this helps
Todd S
Thank you, I hooked up my yoke regulator to the yoke bottle, it sealed, I then attached my DIN converter to my DIN regulator and attached to the YOKE bottle turned on the valve and there was no seal:( so I attached my YOKE REG to the YOKE tank, good seal. so I figured maybe I was missing something. But apparently not. So I guess I'll send it back and see if another one works for me.
thank you for your response.
Todd
ROBERT W
It isn't a matter of buying O-rings for this as your DIN regulator holds the O-ring that seals this to the regulator and the tank valve has the O-ring for the yoke to tank connection. When using this adapter both O-rings in good condition are needed for a proper seal. You should keep the Din regulator's dust cover on when not using the reg. and this requires no other dust cap or cover.
BOU G
Mine came with the 0-rings when I bought it. I would contact Customer Support and see if they can send you some.
OLEKSIY G
You need to ensure you have proper seals. Din has a seal on regulator, where is Yoke has seal in the valve. I would suggest replacing one at a time.
ROBERT H
It should screw on your DIN regulator just like screwing the reg onto a tank DIN valve. Check the O ring on your regulator - that is the O-ring that seals this adapter onto your regulator. Make sure the air isn't leaking out where this yoke goes onto the tank valve - the tank might need a new o-ring.
ROBERT H
You do need (2) O-rings; (1) and the yoke on the tank and (1) at the din valve on the regulator. I've been diving these for 10+ years with no problems. In fact, I suggest them to anyone who has a din regulator, great accessory.
