XS Scuba X Series High Pressure Twin Cylinder Package - International Valve Tx80-200 043218

Mfg Part #: Tx-200

XS Scuba X Series High Pressure Twin Cylinder Package - International Valve

UPGRADES:
100cf X7 Series Add $125.00
Options: 
 $979.95 

Customer Reviews for XS Scuba X Series High Pressure Twin Cylinder Package - International Valve:

See the top 20 most helpful scuba gear reviews

No reviews found for this product.

Questions and Answers for XS Scuba X Series High Pressure Twin Cylinder Package - International Valve:


  • Richard:

    What is shipping time and charge to CA 92071 for twin pks ?

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Richard, I am currently out-of-stock in all the sizes and would not have them in till 7/20/2012. Then they would ship out the same day and we are located in Irvine, Ca at zip code 92614. So you are only looking at a few days in shipping and the shipping charge on these would be 79.90 and there is sales tax of 87.57 so your total would be $1,297.42. If you have any other questions or would like to place an order please feel free to give us a call at 1.800.347.2822.

XS Scuba Isolation Manifold

International: Combination DIN/yoke outlets. Removable 230 BAR DIN Inserts. Attachment of DIN or Yoke style regulators.

300bar DIN Outlets: Dedicated DIN outlets. Attachment of DIN style regulators only

Handwheels

one and one half turns of the handwheels from fully on to fully off. Unsurpassed flow rates. Optimum regulator performance in extremes.

Highland Bands

Proudly built to the exact specifications as the original Joe McGarth bands. 316 grade stainless steel construction. Stainless steel mounting hardware included.

Self Draining Tank Boots

Manufacted by Sea Pearls in the USA. Ribbed interior to prevent water trapping. High impact plastic.

Designed in 2004 by XS Scuba, these hot-dip galvanized cylinders are manufactured in North America by Worthington Cylinders. The Worthington Cylinders Corp. is already the world's largest supplier of industrial steel cylinders, and has become the market leader.

There are two different 'Series' of steel cylinders available. The most popular are high-pressure X-Series™ cylinders, as they offer the most air in the smallest size cylinders. The other are the low-pressure LP-Series™ cylinders which offer lower fill pressures, making them ideal for dive boats and many air compressors.
The exterior of all XS Scuba steel cylinders are hot dip galvanized. This highly demanded and preferred finish is utilized on all Worthington steel cylinders offered by XS Scuba. Don't be misled by claims from companies distributing steel cylinders with painted exteriors. There is no better process to protect a steel cylinder from rust and corrosion than hot dip galvanization!

X-Series™
High Pressure - 3442 psi service pressure
Six different models, Two different diameters
X7 - 7.25' diameter
X8 - 8.00' diameter
Hot dip galvanized exterior finish
Chromium Molybdenum Vanadium steel alloy construction
High-strength steel technology
More volume in a compact cylinder
Includes XS Scuba DIN/Yoke convertible valve and durable, self-draining boot
Inlet thread is standard 3/4'-14 NPSM
Ultimate weight to capacity ratios
Ideal buoyancy characteristics
Manufactured to DOT Exemption and Canadian TC Permit

LP-Series™
Low Pressure - 2400+ psi service pressure
Six different models, Three different diameters

Hot dip galvanized exterior finish
Chromium Molybdenum (4130) steel alloy construction
'Plus' rated for 10% overfill to 2640 psi
Compressor-friendly, lower pressure
Includes XS Scuba DIN/Yoke convertible valve and durable, self-draining boot
Inlet thread is standard 3/4'-14 NPSM
Traditional, proven design
Negatively buoyant throughout the dive
Manufactured to DOT 3AA standard
Meets Canadian TC3AAM specifications

Manufacturing Process
Built from Chromium Molybdenum steel plate
Utilizes the deep draw process; the preferred method to build a steel scuba cylinder
This process yields a cylinder with a very uniform wall thickness resulting in a lighter, more efficient cylinder
Buoyancy
Superior buoyancy characteristics (Specs)
These cylinders have been designed to be slightly negative at the end of a dive
Exterior Finish
Hot dip galvanized - the absolute best finish for a steel scuba cylinder
Nitrox Ready
Cleaned and sealed at the factory
Free of hydrocarbons to a level of 40 mg per square meter
Boots
Included with all XS Scuba steel cylinders
Quality, self-draining design

Valves

All XS Scuba steel cylinders include an International DIN Yoke valve
Allows upgrade to Modular valves and manifolds
Convertible design allows for standard yoke or 230 bar DIN connections
Standard inlet thread (3/4'-14 NPSM) on cylinder allows upgrade to any other Thermo valve
These valves are clean for Nitrox up to 40% FO2

Manufacturing Process
Our steel cylinders are manufactured at Worthington Cylinder's state of the art facility in Tilbury, Canada. The cylinders are manufactured using the Deep Draw and Ironing (DDI) process. Cylinders start from a circular plate of chrome-moly steel. Multiple draws on a hydraulic press transform the plate into an open ended shell. The shell is then closed, the neck is formed and the threads are machined. The DDI process produces the most consistence wall thickness resulting in the lightest weight, most efficient cylinders. This manufacturing process is what allows us to supply cylinders with the best buoyancy characteristics for scuba diving . Other suppliers are selling cylinders that are manufactured using the Billet Piercing or 'Spun' Tube process. These cylinders are generally heavier with less preferred buoyancy characteristics than those manufactured using DDI.

No Exterior Rusting...We Guarantee it for the lifetime of the cylinder!
During the process of Hot Dip Galvanizing, the exterior of our steel cylinders are submerged into 840ºF molten zinc. The process deposits an 8-10 mil thick zinc barrier to protect against the corrosive ocean environment. This layer of zinc metallurgically bonds to the steel cylinder. It will not chip and wear away like a painted zinc finish. XS Scuba is so confident that exterior rust will not be an issue, we guarantee it for the life of the cylinder. If the exterior of your XS Scuba HDG steel cylinder rusts, we'll correct it for as long as you own the cylinder, without cost to you.

View all XS Scuba TEK Gear

Choose Currency:

Scuba.com, 1752 Langley Avenue, Irvine CA 92614