Average Customer Review: based on 9 reviews.Rating: MIFLEX Hose is the best
Could you tell me if the new "XS Scuba MIFLEX HD Braided High Pressure Scuba Gauge Hose" comes with a high pressure spool. If it does, do you know if it is compatable with the SUUNTO Quick Disconnect. If it doesnt come with the high pressure spool, do you sell the high pressure spool for this hose that will work with the SUUNTO Quick Disconnect? Thanks!
Hello Richard, the HP hoses do not come with that. That is part of the gauge set-up. You would need to contact our Repair@scuba.com. That would be something that they could order up for you. If you have any other questions or would like to place an order please feel free to give us a call at 1.800.347.2822.
Is the xs Scuba MIFLEX carbon hd hose compatible with the basic oceanic spg gauge and its high pressure spool or does one need to order a special high pressure spool? After I recieved my xs miflex carbon hose and changed out the hoses with my oceanic pressure gauge and using the high pressure spool that came with the oceanic gauge , I notice there is a alot play ( sliding up and down at the female connection and gauge ) . Is a different or longer high pressure spool required?
Just a follow up to my question I asked before I ordered this hose. It does not work with an Oceanic 2.1 dive computer without quick disconnect. The retaining nut is too long for the female fitting on the computer, cannot tighten enough to seal. I had to return the hose.
There is no "female" fitting on the computer that you would connect a hose to. The fitting on the computer or will always be male. The male fittings on the computers and pressure gauges use an industry standard thread and size as do the female fittings on the high pressure hoses. If removing a quick disconnect and installing a normal HP hose, don''t forget that the HP Spool will be required as well. If you don''t have that (and they don''t come with the hose nor the computer with QD) the hose will not adapt properly and will leak.
Hello, is this the new model high pressure hose that comes with the green o-ring? Also, what length would you recommend to replace the hose on an Atomic Cobalt? Thanks!
I manage a dive shop in South Carolina, USA and I have a customer needing a 36" or longer HP hose for his Suunto Cobra first generation model. Will this hose work and if not what do you recommend
I have the Suunto gauge set with the new "carbon fiber" thin hp hose and the green o-ring on it. But both of my first stages are mid-80s standard equipment, Dacor and Scubapro. And it seems like the Suunto hose, which Im told is "standard 7/16" is actually a little wider than the old hp ports. It doesnt screw in. Has something changed? And can I get an adapter busing or different hose that will let me use the new gauge with my old first stages? (They were just overhauled, they work 100%, Id rather not throw them away.)
Hello Red, this is the adapter you need: Innovative 3/8´´male To 7/16´´female Adapter, found here: http://www.scuba.com/scuba-gear-37/034031/Innovative-3-8male-To-7-16female-Adaptor.html
High Performance Braided Hoses
* For Distribution to North America Only
Extreme Abrasion Resistance
MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
- High pressure hoses
- Regulator low pressure hoses
- BC quick-disconnect hoses
- Rebreather hose
Patent-pending MIFLEX double braiding design
Polyurethane compound liner
Polyester inner layer with nylon outer layer braiding
Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
Double braiding also resists UV rays out of the water, extending the life span of the hose
Oxygen cleaned and tested at the factory
Lightweight and Flexible
More than 30% lighter in weight when compared to rubber hoses of the same length
Tie an MIFLEX hose into a tight knot and the flow of air remains continuous through the hose
Made in Italy
Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
Certified and tested to EN250 Standard
Fitting have 5.2 mm internal bore
Hose diameter - External 12 mm, Internal 6.5mm
Premium packaging doubles as a water-resistant