Average Customer Review: based on 8 reviews.Rating: Oceanic: Quick Disconnect High Pressure Hose
can you confirm that this Quick Disconnect hose will fit an Aeris Atmos AE? A previous order from a friend used skew #00811704 and MFG #1300-1 when he ordered from you and it was compatible. I believe this is the product but I cannot find those numbers listed. Thanks
is this both parts or just the hose thanks jack
Hello Jack, this is just the hose part. If your computer is not already set up for the quick disconnect. If you are looking to make your computer a quick disconnect you are looking for the Aeris High Pressure Dive Hose Quick Disconnect web link: http://www.scuba.com/scuba-gear-67/008905/Aeris-High-Pressure-Dive-Hose-Quick-Disconnect.html. That will make it on the 1st stage side a quick disconnect.
I have an older "pro plus" (no suffix numbers) that may be 10-12 years old can I convert this to a quick release ?? . . the "boot" on the base of the unit which the hose goes through looks a lot longer than pictured one here ?? Thanks, Jim
I have a Oceanic Veo computer with anolog air readout set in a console. on latest dive trip noticed that my hose leaking along the length, not much but still showing bubbles. How do I change this HP hose? Lee
Hello Ric, that is normal for a HP hose. But if you are looking to replace that hose Oceanic High Pressure Quick Disconnect Hose. then all you would have to do is buy a new hose and you can replace it yourself or take it to your local dive shop and they can install it for you.
I have the pro 2.1 w/QD. I have two hoses and two sets of gear.the other day while teaching a class a student. Noticed that my high pressure hose was leaking air. It is coming from just below the crimp. How do I remove the QD from the hose so that I can change just the hose? I want to replace it with a longer milflex hose . My arms are just not long enough or my eyes are going with age.
I have an Oceanic Datamax pro plus and need a new quick disconnect HP hose. Do you have one in stock and what is the part number? Thanks John McGrath Raleigh, NC
I have a standard HP hose connected to an older Sherwood two-gauge console. Will this QD work between my HP hose and the console?
I have a early data max plus that has a quick disconnect high pressure hose. Is the placement hose you offer work on this older version?
Hi, Im trying to replace my Aeris Atmos AI quick release hose. I ordered an Oceanic Quick release after reading its compatable. How does the small piece (for analog guage) come out of hose connection? It seems like it should be a small twist and it would come out but it doesnt. I dont want to use a tool unless needed to prevent any damage. Any advice? Any youtubes available before Im forced to take this to a dive shop? Thanks!
A dive computer can be a large investment, make sure you protect your investment by using the quick disconnect by Oceanic. With a simple quarter turn by hand, you can detach your dive computer from the high pressure hose. Since you do not need tools to remove the computer, you can quickly detach it from the high pressure hose to download data, or keep it secure and protected until you're ready to use it again. When you need to use the computer again, simply and safely reconnect it. This quick disconnect is also nitrox compatible. This also features Marine grade chrome plated Brass-durable corrosion resistant, helps protect the computer, and nitrox ready. The Quick Disconnect makes it simple to use, if you want to store your computer away for safety or download dive information during a trip or just carry your console as an airline carry on.