Instruments: submersible pressure gauge + depth gauge. Boot: shock-resistant elastomer. Hose: 7/16” UNF length 90 cm. Dimensions: 218 x 72 x 29 mm. Weight: 410 g
Our analog console with pressure and depth gauges offers the simple yet versatile option to upgrade from the analog depth gauge to the compact Puck capsule computer.
Use The submersible pressure gauge is a safety device for monitoring residual air pressure in the tank, designed to be used as part of a SCUBA set (open-circuit, self-contained underwater breathing apparatus). The pressure gauge must be assembled on the regulator first stage by means of the high pressure hose connected to the gauge. The pressure gauge can be used at temperatures below 10°C.
1) Locate the high pressure ports on the regulator first stage (refer to the instruction manual of the regulator; the high pressure ports on the first stage may be marked with the letters “HP” or with the maximum pressure rating) and, following the instructions, remove the plug from the chosen port. 2 ) Remove the thread protection cap before connecting the hose to the regulator first stage. 3) Screw the hose fully into the high pressure port of the regulator first stage. Tighten firmly but carefully, using a 14-mm hex
Storage After use, it is recommended that you rinse the instrument in fresh water while it is still assembled on the regulator, to prevent water from penetrating inside the hose. Allow to dry in air, and then put the instrument away, taking care to replace the special thread protection cap on the hose. The instrument should be stored in a dry place, protected from heat sources and direct light, without bending the hose too tightly (minimum bend radius 20 cm).
Maintenance • Avoid exposing the instrument to direct sunlight or sources of heat. • Treat the gauge like a precision instrument and avoid bumps or knocks. • Rinse in fresh water after every dive. It is recommended that the 108 O-ring Vitron gasket, located on the threads of hose coupling which connects to the pressure reducer, be replaced periodically. Any maintenance or repairs must obligatorily be performed by Mares or its authorized personnel.