Rating: Nice!!!
Reviewer: Harrison Davis,
The reason I got this is because I do boat cleaning and recovery work so im always in and out of the water grabbing tanks and going to the next job. And it is a big pain when you jump in to clean a boat and run out of air 15 minutes into it, then you got to climb out and get another tank. So I got this to put on the first stage because its small and compact, it wont get hooked on anything and its cheap to replace if it breaks. So far is has been amazing and I would recommend it to anyone in this profession
Did this Review help?
YesNo
4 out of 9 people found this review helpful.
Rating: A quality pony bottle pressure guage that wont fit my needs
Reviewer: Burton Pittler, - View all my reviews
I am delighted with my SpareAir & after dive jacket that I purchased from you. However when I opened the pony bottle pressure guage, I found out that it will need an special adapter to work on my pony bottle regulator, which was made by Healthhways, but still works well. The problem is, that the pony bottle quage has a new standard high pressure port fitting & the Healthways 1st stage regulator has a high pressure port, but the size of the port is for a low pressur hose. I wanted to replace the Scubapro pressure guage, with a low pressure fitting that is attached to the high pressure port, but I am precluded from doing that with the new guage, unless I can find an adapter with a low pessure fitting on the bottom & a high pressure fitting on the top. If I can locate an adapter as explained, my rating will change to 5 stars. CAN ANYONE HELP ME??
Did this Review help?
YesNo
48 out of 98 people found this review helpful.
Rating: Better than most
Reviewer: Cynthia A.,
The advantage this gauge has over many others, is its size.Not too big to be cumbersome or in the way, but large enough that one doesnt need a magnifying glass to read it.I did have to replace it , sooner than I expected,but diving dailey for 3 months takes it toll on other equipment as well.
Did this Review help?
YesNo
26 out of 54 people found this review helpful.
Rating: spare air
Reviewer: dennis waite,
i bought this gauge for my 13 cu ft spare air tank it works
Did this Review help?
YesNo
2 out of 4 people found this review helpful.
Rating: easy to view pressure status
Reviewer: Doug B., - View all my reviews
I use this gauge a a quick way to check the status of my cylinders - very easy to read
Did this Review help?
YesNo
7 out of 15 people found this review helpful.
Rating: Pony Bottle Pressure Gauge
Reviewer: Bernie Podkowka, - View all my reviews
Everything it was supposed to be! 100% satisfied with this product!!! Thank you! :)
Did this Review help?
YesNo
17 out of 35 people found this review helpful.
Rating: Great Price and Fast Delivery
Reviewer: Patric Nichols,
The product performed great on two dives at 251FSW on the USS Burns. The price was great and the product delivery was surprisingly quick. 5 out of 5 on this one!
Did this Review help?
YesNo
5 out of 11 people found this review helpful.
Rating: EZ READING
Reviewer: Douglas P., - View all my reviews
Real easy to read the gauge, even without my reading glasses. I was worried about the large face getting broken, but it stood up just fine to 14 airplane flights and 2 weeks of diving.
Did this Review help?
YesNo
27 out of 54 people found this review helpful.
Rating: Great gauge
Reviewer: Mike Johnson,
Im very critical person when it comes to my scuba gear. This gauge performs. Its clear to read, rugged, and even looks good. Im in the Channel Islands right now using the gauge, and Im very happy I bought it.
Mike J.
Did this Review help?
YesNo
168 out of 365 people found this review helpful.
Rating: Pony Bottle Gauge
Reviewer: Mark P., - View all my reviews
Great space saver.
Questions and Answers for H2O Pony Bottle Pressure Gauge:
Joel:
Hello! Does this gauge fit a Spare Air without an adapter? I read all the reviews but none specifically answer this question.
I see you offer an adapter on the Spare Air page along with the higher priced gauge offered by the Spare Air manufacturer for about $10. Does that mean this gauge requires that adapter in order to mate to a Spare Air unit? Thanks.
Darrick (Certified Scuba Instructor at Scuba.com)
:
I use a 7 litre dive bottle for air pistol propellant. The gauge is bust (About 3 inch dia with a 1/2 inch brass threaded connector) . Will this pony gauge fit the 1/2 inch female connector on my bottle?
Clarke (Certified Scuba Instructor at Scuba.com)
:
Hello Ian, Thank you for your inquiry! The H20 Scuba Pony Pressure Gauge measures .75 inches in diameter and reads up to 5000 PSI. This compact H20 Scuba Pony Pressure Gauge attaches directly to your regulator 1st stage. http://www.scuba.com/scuba-gear-51/017034/H2O-Scuba-Pony-Bottle-Pressure-Gauge.html If you would like to place an order or have questions about our products, please contact one of our certified Dive Instructors at SCUBA.com by calling 800-247-2822 <> 949-221-9300 or e-mail us at: info@scuba.com