H2O Pony Bottle Pressure Gauge GPD 017034

Mfg Part #: GPD
Retail:
 $40.00  
You Pay:
$19.95
You Save:
$20.05
  • 5000 PSI Pressure Gauge
  • Metric and standard measurement up to 300 BAR
  • Measures 3/4" in diameter
  • Small and compact
  • Luminescent face
  • Visual low air indicator
  • Attaches directly to your regulator 1st stage
  • FULL MANUFACTURER’S WARRANTY

 

Customer Reviews for H2O Pony Bottle Pressure Gauge:

See the top 20 most helpful scuba gear reviews

Average Customer Review: based on 27 reviews.

Rating: H2O Pony Bottle Pressure Gauge Review - $19.95 - Scuba Gear Customer Reviews
Reviewer: david szklarski
I use one on a reg set using a hoseless computer as quick check. Great long term gauge. I had same gauge for near 3 years and approximately 1000 dives before failure. I bought two this time one for instant use and another for back up. Other older unit still in service on my pony pushing 5 years and 250ish dives. Bought it before and would buy again.

Did this Review help?
No
Yes

Rating: Perfect Pony Bottle guage
Reviewer: Roger R.  -  View all my reviews
I searched several sources for an easy to read, high quality pressure gauge for my pony bottle. I knew that with a button sized gauge the colored markings and a luminescent face would be important for quick reference. This is the best one I have seen and it has met my requirements perfectly.

Did this Review help?
No
Yes

25 out of 50 people found this review helpful.

Rating: Nice!!!
Reviewer: Harrison Davis
The reason I got this is because I do boat cleaning and recovery work so im always in and out of the water grabbing tanks and going to the next job. And it is a big pain when you jump in to clean a boat and run out of air 15 minutes into it, then you got to climb out and get another tank. So I got this to put on the first stage because its small and compact, it wont get hooked on anything and its cheap to replace if it breaks. So far is has been amazing and I would recommend it to anyone in this profession

Did this Review help?
No
Yes

20 out of 38 people found this review helpful.

Rating: A quality pony bottle pressure guage that wont fit my needs
Reviewer: Burton Pittler  -  View all my reviews
I am delighted with my SpareAir & after dive jacket that I purchased from you. However when I opened the pony bottle pressure guage, I found out that it will need an special adapter to work on my pony bottle regulator, which was made by Healthhways, but still works well. The problem is, that the pony bottle quage has a new standard high pressure port fitting & the Healthways 1st stage regulator has a high pressure port, but the size of the port is for a low pressur hose. I wanted to replace the Scubapro pressure guage, with a low pressure fitting that is attached to the high pressure port, but I am precluded from doing that with the new guage, unless I can find an adapter with a low pessure fitting on the bottom & a high pressure fitting on the top. If I can locate an adapter as explained, my rating will change to 5 stars. CAN ANYONE HELP ME??

Did this Review help?
No
Yes

77 out of 155 people found this review helpful.

Rating: Better than most
Reviewer: Cynthia A.
The advantage this gauge has over many others, is its size.Not too big to be cumbersome or in the way, but large enough that one doesnt need a magnifying glass to read it.I did have to replace it , sooner than I expected,but diving dailey for 3 months takes it toll on other equipment as well.

Did this Review help?
No
Yes

29 out of 58 people found this review helpful.

Rating: Perfect gauge
Reviewer: Clyde McCullough  -  View all my reviews
This is the perfect gauge for my pony bottle. Small and screws right into the first stage regulator.

Did this Review help?
No
Yes

17 out of 31 people found this review helpful.

Rating: Meets my need perfectly
Reviewer: Paul B.  -  View all my reviews
Excellent product that meest my needs perfectly

Did this Review help?
No
Yes

21 out of 40 people found this review helpful.

Rating: spare air
Reviewer: dennis waite
i bought this gauge for my 13 cu ft spare air tank it works

Did this Review help?
No
Yes

18 out of 33 people found this review helpful.

Rating: easy to view pressure status
Reviewer: Doug B.  -  View all my reviews
I use this gauge a a quick way to check the status of my cylinders - very easy to read

Did this Review help?
No
Yes

42 out of 82 people found this review helpful.

Rating: Great Price and Fast Delivery
Reviewer: Patric Nichols
The product performed great on two dives at 251FSW on the USS Burns. The price was great and the product delivery was surprisingly quick. 5 out of 5 on this one!

Did this Review help?
No
Yes

22 out of 41 people found this review helpful.

See all 27 customer reviews...

Questions and Answers for H2O Pony Bottle Pressure Gauge:


  • Joel:

    Hello! Does this gauge fit a Spare Air without an adapter? I read all the reviews but none specifically answer this question. I see you offer an adapter on the Spare Air page along with the higher priced gauge offered by the Spare Air manufacturer for about $10. Does that mean this gauge requires that adapter in order to mate to a Spare Air unit? Thanks.

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Joel, if you are looking for a gauge for the spare air you are going to need the Submersible Systems Mini Pressure Gauge For Spare Air web Link: http://www.scuba.com/scuba-gear-51/017200/Submersible-Systems-Mini-Pressure-Gauge-For-Spare-Air.html. If you have any other question or would like to place an order please feel free to give us a call at 1.800.347.2822.

  • Ian:

    I use a 7 litre dive bottle for air pistol propellant. The gauge is bust (About 3 inch dia with a 1/2 inch brass threaded connector) . Will this pony gauge fit the 1/2 inch female connector on my bottle?

    Clarke  (Certified Scuba Instructor at Scuba.com):

    Hello Ian, Thank you for your inquiry! The H20 Scuba Pony Pressure Gauge measures .75 inches in diameter and reads up to 5000 PSI. This compact H20 Scuba Pony Pressure Gauge attaches directly to your regulator 1st stage. http://www.scuba.com/scuba-gear-51/017034/H2O-Scuba-Pony-Bottle-Pressure-Gauge.html If you would like to place an order or have questions about our products, please contact one of our certified Dive Instructors at SCUBA.com by calling 800-247-2822 <> 949-221-9300 or e-mail us at: info@scuba.com

  • DAN:

    hi, i have two pony tanks,and i need a pressure gage for both of them luxfer s6 6 c catalina 13 and need to know if this h20 pony bottle pressure gauge will fit. thanks in advance, dan

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Dan, if you have a high pressure port on your tank or 1st stage this would screw into that port. So you would be able read the tank pressure.

  • Chino:

    Is this Nitrox compatible? What percent?

    Chien  (Customer & Owner of this Product):

    I know how a SPG works. Can I use this with 100% oxygen? Thanks, Chino

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Chino, this will only tell you the pressure of the tank not what % of Nitrox is in the tank so you could have 40% in the tank and this would only show pressure in the tank.

  • Francois:

    Is the face plate both in bars and psi as in the picture? Or different as in the 360 view?

    Bob  (Certified Scuba Instructor at Scuba.com):

    It is marked as in the picture with both pressure ratings.

Deluxe Pony Gauge - GPD

A pony gauge you can actually read!
Both Bar & P.S.I.
Approximately 1 inch across

View all H2O Gauges

Choose Currency:

Scuba.com, 1752 Langley Avenue, Irvine CA 92614