|
Mfg Part Number :
OWB-06-02 |
| | $79.95
|
|
Mfg Part Number :
08.7193.16 |
- Fits Oceanic Chute 3 BC
- Inner velcro pouch holds up to 10lbs.
- Secured by a 2" quick release buckle
- Simple to load and easy to release
- Sold in Pairs
- 1600 Denier
- COLOR: Black
 FULL MANUFACTURER'S WARRANTY
| | $89.95
|
|
Mfg Part Number :
208.1250.037 |
Eligible for Free Standard Shipping on orders over $25
- 1000 denier cordura
- Compact, clean and perfect for use with a doubles rig
- Cam band slots
- Lower left pull relief valve
- Can be used with single or double tanks
- Available in 37lb or 55lb lift
 FULL MANUFACTURER'S WARRANTY
| | Retail:
$317.00
You Pay:
$288.80
You Save:
$28.20
|
|
Mfg Part Number :
Signature Series Single wing w/bladder |
- Streamlined and light-weight for absolute minimal drag
- Superior balance and trim characteristics
- Available in lift capacities:
- 30lbs for temperate water diving
- 45lbs for cold water diving
- 1050 Denier Ballistic Material
 FULL MANUFACTURER'S WARRANTY
| | $340.95
|
|
Mfg Part Number :
03032 |
- Enables divers to carry slates, tools, or spare masks
- Fits any BC or weight belt with standard 2 inch webbing
- 420 Denier
- Reflective strip for visibility
- Drainage Grommet
- Two D-rings inside pocket
- Heavy duty zipper
- DIMENSIONS: 9.5" x 7" x 3.5"
- CAPACITY: 233 cubic inches
 FULL MANUFACTURER'S WARRANTY
| | $80.00
|
|
Mfg Part Number :
03030 |
- Use for carrying tools, knives, shears, strobes, cameras, slates, etc.
- 2 Retractor/Tool pockets - see below to order retractor
- Fits any BC or weight belt with standard 2 inch webbing or use the two included elastic leg straps
- Heavy Duty Cordura
- Large enough to fit a small porthole
- Hypalon bottom and zipper pulls
- Molded Heavy Duty handle
- Snap clip tabs
- Drainage grommets
- Built in knife shealth (for use with a 5" blade)
- DIMENSIONS: 15" x 14" x 4"
- CAPACITY: 600 Cubic Inches
- FULL MANUFACTURER'S WARRANTY
| | $90.00
|
|
Mfg Part Number :
000-52 |
 Customer reviews
- For use with Poseidon BESEA BC
- Can be positioned horizontally or vertically on any of 30 attachment points
- D-Ring can be located where you want it
- Easy to remove and replace
 FULL MANUFACTURER'S WARRANTY
| | $26.52
|
|
Mfg Part Number :
03121 |
- Fits any BC or weight belt with standard 2 inch webbing or attaches to D-rings
- Expedition pocket for carrying tools, knives, shears, strobes, cameras, slates, etc.
- Adjustable carry cuff for lift bags or pony bottles
- Heavy duty cordura
- Horizontal design
- Dual zippered pockets
- Drainage grommets
- Built in 5" blade Knife Sheath (see below to order)
- Reflective piping
- Web-loc attach
- Does not include lift bag as shown
- POCKET DIMENSIONS: 9" x 7" x 3"
- POCKET CAPACITY: 189 cubic inches
- FULL MANUFACTURER'S WARRANTY
| | $89.95
|
|
Mfg Part Number :
8041 |
- 10-LB wieght capacity each, sold as a pair
- Convenient way to manage your weights
- Convert Zeagle Tech BC to an intergrated wieght system
 FULL MANUFACTURER'S WARRANTY
| | $30.95
|
|
Mfg Part Number :
7722 |
- Dual bladder cpability for super size redundancy
- Replacement bladder for divers wishing to adjust the lift capacity of their Zeagle BCD
- Standard inflator
- Dual dump valves
- 1050 Denier heavy duty ballistic nylon shell
- For use with single or twin tanks
- Designed for use with technical diving systems
- LIFT: 65lbs
- FULL MANUFACTURER'S WARRANTY
| | $329.00
|
|
Mfg Part Number :
AC900 |
- The Quick Disconnect makes it simple to use
- Just push to attach - no need to pull back the collar
- Convert any standard regulator hose to a low pressure "EZ" Quick Disconnect hose
- Installs to the second stage end of the regulator hose
- Wide easy grip collar
- Chromed brass construction
- Oxygen clean with Viton o-rings
 FULL MANUFACTURER’S WARRANTY
| | $19.95
|
|
Mfg Part Number :
8050 |
- 40-lb capacity
- Specialized for areas where greater amounts of weight are required
- Mounts on the side of tank
- Fits any BC with 2" tank band
- Black only
- FULL MANUFACTURER'S WARRANTY
| | $44.95
|
|
Mfg Part Number :
gpp-50 |
- Replacement power inflator for your BC
- Compatible with all power inflators with 1 inch corrugated hoses
- Not compatible with Aeris, Aqua-Lung, Cressi-sub, Dacor, Mares, Oceanic or SeaQuest BC's
 FULL MANUFACTURER'S WARRANTY
| | $43.95
|
|
Mfg Part Number :
03031 |
- Fits any BC or weight belt with standard 2 inch webbing or attaches to D-rings
- Enables divers to carry slates, tools, or spare masks
- Heavy duty zipper
- Heavy duty Cordura
- DIMENSIONS: 8" x 6" x 2"
- CAPACITY: 96 cubic inches
- FULL MANUFACTURER'S WARRANTY
| | $40.00
|
|
Mfg Part Number :
h-sdrb |
| | $3.42
|
|
Mfg Part Number :
18# Single Wing |
- 18lbs perfect for traveling and warm diving
- Streamlined and light-weight for absolute minimal drag
- Superior balance and trim characteristics
- Available in lift capacities:
- 1050 Denier Ballistic Material
- FULL MANUFACTURER'S WARRANTY
| | $250.95
|
|
Mfg Part Number :
SBP-PAD |
- Adds a comfortable padded cover to the hard plastic back pack on Sherwood buoyancy compensators
- Ideal for warm water divers
 FULL MANUFACTURER'S WARRANTY
| | $24.95
|
|
Mfg Part Number :
OWB-4 |
- Designed for traveling and warm waters
- Machined series 300, 1/8" stainless steel that has been laser cut and with a matte fit
- 15" long
- 2.2 pounds
- FULL MANUFACTURER'S WARRANTY
| | $169.95
|
|
Mfg Part Number :
Large Backplate |
Customer reviews
- Beautifully machined series 300, 1/8" stainless steel that has been laser cut and with a matte finish
- Uses standard 2" webbing and 11" centers
- Angled shoulder straps for a great fit
- Accepts many standard BC accessories
- FULL MANUFACTURER'S WARRANTY
- Small Backplate Specs:
- Designed for divers that are 5'3" and shorter
- Plate is 13.1" long
- Weight: 4 pounds
- Medium Backplate Specs:
- Designed for divers that are 5'4" to 6'1" tall
- Plate is 15" long
- Weight: 5 pounds
| | $169.95
|
|
Mfg Part Number :
208.1250.085 |
Eligible for Free Standard Shipping on orders over $25
- Streamlined design for reduced drag and passing through tight spaces
- 1000 Denier Cordura with PU Lamination Outer Shell & 15mm Urethane Internal Bladder
- Cam Band slots
- Centrally located elbow to avoid tank/regulator interference
- Comes with removable bungee straps
- Lower Left Pull Relief Valve
- For use with single or twin tanks
- Includes standard inflator
- Available in 60lb, 85lb or Dual 85lb lift
- FULL MANUFACTURER'S WARRANTY
| | Retail:
$495.00
You Pay:
$313.04
You Save:
$181.96
|
|
Mfg Part Number :
BD 350 KA |
- Allows the traveling diver to pack light
- Used to combine two single tanks into doubles
- Two band system works with all OMS harness systems
- Each assembly includes: Two 2" cam bands with aluminum rods and One 5/16" threaded rod
 FULL MANUFACTURER'S WARRANTY
| | Retail:
$271.72
You Pay:
$189.95
You Save:
$81.77
|
|
Mfg Part Number :
bc-lgs60 |
Customer reviews
- Designed for use with technical diving systems
- Streamlined and light-weight for absolute minimal drag
- Easy to reach rear lower dump valve
- Heavy duty 1000 denier material for superior abrasion/puncture resistance
- Superior balance and trim characteristics
- Tailored to fit longer cylinders
- LIFT: 45lbs or 70lbs
- COLOR: Black
- FULL MANUFACTURER'S WARRANTY
| | Retail:
$389.55
You Pay:
$219.95
You Save:
$169.60
|
|
Mfg Part Number :
CAY- PAD |
Customer reviews
| | Retail:
$20.00
You Pay:
$5.95
You Save:
$14.05
|
|
Mfg Part Number :
BC Pad |
Eligible for Free Standard Shipping on orders over $25
| | Retail:
$19.95
You Pay:
$6.95
You Save:
$13.00
|
FULL MANUFACTURER'S WARRANTY 
