|
Mfg Part Number :
DGW-02 |
- Use to check the intermediate pressure of a regulator's first stage during servicing
- Liquid filled pressure gauge
- Protective rubber boot
- Screw Knob Type Bleed Valve
- 400 PSI
- Standard size male quick disconnect fitting fits most Low Pressure Inflator Hoses
 FULL MANUFACTURER'S WARRANTY
| | $93.95
|
|
Mfg Part Number :
DGW-01 |
 Customer reviews
- Attaches to Low Pressure Inflator Hose
- Used for adjusting the 1st stage intermediate pressure
- High quality liquid filled gauge
- Bleed screw
- 200 PSI
- FULL MANUFACTURER'S WARRANTY
| | $83.95
|
|
Mfg Part Number :
3790 |
- For cylinders fitted with a DIN valve only (for cylinders fitted with a standard yoke valve order adapter below)
- One of the best performing 1st stages on the market
- Utilizes Poseidons unique servo-assist failsafe design
- Features: 2 high pressure and 4 low pressure ports
 FULL MANUFACTURER'S WARRANTY
| | $412.95
|
|
Mfg Part Number :
DIN-C |
- Attaches to the first stage of your DIN regulator
- Keeps your regulator protected
- Seals out water
- Attached nylon lanyard
 FULL MANUFACTURER’S WARRANTY
| | $11.95
|
|
Mfg Part Number :
RB-3208 |
Customer reviews
| | $5.95
|
|
Mfg Part Number :
MB-Z2 |
- 9/16´´-18 Female TO (2 ports) 3/8´´-24 Female
- Splits one standard hose into two outlets.
- Can also be used to split two sources hoses into one feed supply.
- Solid brass construction for maximum durability.
- Certified for up to 100% oxygen service
 FULL MANUFACTURER’S WARRANTY
| | $42.99
|
|
Mfg Part Number :
PS-LP-6 |
| | $63.99
|
|
Mfg Part Number :
PS-LP-2 |
- 3/8" Male to 2 - 3/8" Female
- Convert 1 Low Pressure port to 2
- Low pressure L-shaped swivel pivot
- Add 2 low pressure accessories from one port
- FULL MANUFACTURER’S WARRANTY
| | $63.99
|
|
Mfg Part Number :
PS-LP-4 |
| | $63.99
|
|
Mfg Part Number :
PS-LP-5 |
| | $63.99
|
|
Mfg Part Number :
SYM-XF |
| | $32.99
|
|
Mfg Part Number :
AM-YFI |
| | $32.99
|
|
Demonstration Video: 
Mfg Part Number :
240.4152 |
- Durable solid silicone regulator necklace
- Holds the regulator in place around your neck - see how it works!
- Fits comfortably around the neck
- Easy to install on any second stage
- Never reach around for your regulator again!
- COLORS: Black
- SIZES: Adjustable One Size Fits All
 FULL MANUFACTURER’S WARRANTY
| | $9.95
|
|
Mfg Part Number :
MB-Z3 |
- 9/16´´-18 Female TO (3 Ports) 3/8´´-24 Female
- Splits one standard hose into three outlets.
- Can also be used to split three sources hoses into one feed supply.
- Solid brass construction for maximum durability.
- Certified for up to 100% oxygen service
- FULL MANUFACTURER’S WARRANTY
| | $45.99
|
|
Mfg Part Number :
2415 |
 Customer reviews
- Converts metric male end to 3/8" female end
| | $18.95
|
|
Mfg Part Number :
HO12XX |
Customer reviews
| | $25.95
|
|
Mfg Part Number :
4680-70 |
| | $65.17
|
|
Mfg Part Number :
SOV-2 |
- 9/16"-18 Male (Connects to a standard regulator hose)
- 9/16"-18 Female (Connects to a standard regulator)
- Dimensions: 3" L x 1"O.D
- Shut-off valve can keep a diver from purging valuable gas from the octo
- This shut-off valve can not be accidentally turned on and off.
- Designed to fit between the octo regulator and a standard hose.
- Delrin Sleeve provides for durable use as well as oxygen compatible.
- Certified for up to 100% oxygen service
- FULL MANUFACTURER’S WARRANTY
| | $63.99
|
|
Mfg Part Number :
02-0012-3P |
| | $350.00
|
|
Mfg Part Number :
40.3591 |
- Outfit your Oceanic Alpha 9 Regulator with your own style
- Color kit comes with front cover
- COLORS: Slate Blue, Yellow, White, Orange or Pink
 FULL MANUFACTURER’S WARRANTY
| | $19.95
|
|
Mfg Part Number :
HO-0130 |
Customer reviews
- Convert 1 Low Pressure port to 3
- Add 3 low pressure accessores from one port
| | $15.95
|
|
Demonstration Video: 
Mfg Part Number :
MLP22 |
Customer reviews
- Standard 3/8 male regulator connector
- Replacement hose for regulators
- An average life 3 times longer than traditional hoses
- Excellent resistance to abrasion
- Kink-resistant design - tie an XTREME hose into a knot and air flow remains continuous
- Light and extremely flexible
- COLORS: Blue, Black, Carbon, Red, White or Yellow
- Available in: 6-inch, 9-inch, 18-inch, 22-inch, 26-inch, 30-inch, 36-inch, 40-inch, 44-inch, 48-inch, 60-inch, 84-inch, 300-inch, 600-inch or 1200-inch
 FULL MANUFACTURER'S WARRANTY
Click here for MIFLEX BC Hoses
| | Retail:
$40.00
You Pay:
$36.00
You Save:
$4.00
|
|
Demonstration Video: 
Mfg Part Number :
MP I |
Customer reviews
- Brand new & completely redesigned
Not like most other sites that sell the old discontinued model
- Free storage plug protect regulator from debris and unwelcome guests
- Improved expanded port provides even more air flow
- Onepiece sealing and molding attachment
- Attachment protects from debris from getting regulator during storage
- Offset for both upper and lower jaw
- Seacure MP I: Fits standard orifice regulators (size 1-1/4" x 3/4")
Apollo; Atomic(manufactured pre 2005); Beuchat (Evolution, Iceberg & Nitrox, VX4, VXT8, VXT Octo); Bridgestone; Cressi-Sub (except Ellipse); Dacor (after 1992); Dive Buddy (D.B.); 1st Diving Systems (IST)(Except Proline); NDS; Ocean Master; Pro Sub (Avalon); Saeko-line; SAS; ScubaPro(except A700, C200, C300 uses MP II); Seac; Sherwood (Most early models/Brut/Shadow/Magnum II/Pre 1992 Blizzards); Spare Air; Subgear; Tabata/TUSA (except Imprex)
- Seacure MP II: Fits intermediate size air orifice regulators (size 1-7/16" x 7/8")
Abyss Explorer; Aeris; Apeks; Aqua-Lung newer (Titan, Legend, Kronos); Atomic (Post 2005 larger orifice); Beuchat (VS8, VS3, VS4, VX10); Dacor (Eagle, Viper); Dive Rite (not the Jet Stream 4500); Forte; Genesis (OZ, GS2000, GS2000-ICE, Yukon, Atlas); Halcyon Rebreather; Innerspace Megalodon rebreather; IDI (Osprey is MP I) Mares newer models(except MR-12-II, III, IV or V); Ocean Edge/Ocean Reef; Oceanic (except Zeta); Scubamax; Seaquest; Sea Elite; Sherwood (Maximus, Oasis, 2/92 and newer Blizzard, SR1); Sporasub; XS Scuba, Zeagle(may be snug)
- Seacure MP III:
Aqua-Lung (U.S. Divers) Plastic Regulators (except Titan, Legend); Aquatec; Sea Mech
| | $29.99
|
|
Mfg Part Number :
112-02-00-038 |
Free Standard Shipping
Customer reviews
- Reduces dry throat and cotton mouth by providing you with clean, moist air
- How does the tank air become re-humidified? - for more details, click here!
- Natural Atmosphere 30 to 70% humidity natural, Clean Air - for more details, click here!
- Produces negative ions of oxygen that refresh, invigorate and increase alertness to improve diving performance
- Nitrox compatible to 40% (the recreational limits of nitrox)
- Lower incidence of post diver headaches
- Easier to equalize
- Allen wrench and removal tool included
- Charcoal Filter removes trace particles of dust, rust, and odor
- Simply attach to your regulator hose and add distilled water
- Moisturizing Wick Humidifies dry tank air to normal breathing levels
- Artificial Atmosphere 0.1% humidity Extremely Dry Tank Air
- Fits all regulators in current production(except Beuchat VX10 primary hose and Apex)
 FULL MANUFACTURER'S WARRANTY
CLICK HERE TO SEE HOW IT WORKS
| | Retail:
$249.00
You Pay:
$199.00
You Save:
$50.00
|
FULL MANUFACTURER’S WARRANTY 
FULL MANUFACTURER’S WARRANTY 
![see how it works!](javascript:void(info("/images/misc/regulatornecklace.jpg"))){kind=link}
)){kind=link}
![Kink-resistant design - tie an XTREME hose into a knot and air flow remains continuous](javascript:void(info("/images/gauges/knot.jpg"))){kind=link}