A Heavy-Duty System that can do it all
The Tech 10 BC is at home in Recreational diving or in challenging environments like wreck diving or Tech diving.
Constructed of heavily reinforced 1050 denier ballistic nylon, the Tech BC is comfortable, balanced, and secure. The Tech has a twin buckle front closure rather than a cummerbund, many divers feel the buckles are quicker to adjust when using heavy gear and thick suits. The shoulder is designed with the new super duty Airlock buckle that will swivel to adjust the harness to the body’s contour to eliminate binding and restriction of movement at the chest and underarm areas. The Tech BC comes standard with a 65lb lift bladder for supporting heavier gear, larger divers, or twin cylinders. Standard 11' spaced grommets allow the mounting of twin cylinders via standard or mini backplates, eight stainless steel D-rings and two zippered utility pockets provide plenty of options for carrying gear.
Zeagles modular construction allows the Tech to transition between many different types of diving, single or twin cylinders, and recreational, technical, or professional diving environments. Optional bladder assemblies having as much as two 85-lb lift air cells can be easily mounted.
The Tech is very popular among divers who want a rugged buoyancy system that can take on the most challenging environments.
Color: Black only
65-lb lift capacity bladder (other capacities available as options)
30-lb capacity Ripcord® weight system
20-lb capacity rear trim weight system
PFS Modular Sizing
Heavily reinforced 1050 denier Ballistic nylon construction
11' spaced grommets for mounting backplates and twin cylinders
Two zippered utility pockets at sides
Twin double pull waist buckles in front
4 Stainless steel angled D-rings on shoulders (two adjustable)
4 Stainless steel D-rings on vest
Integral full lumbar pad
Adjustable sternum strap
Single or twin tank capability
Articulated shoulder to reduce binding in the underarm and chest area as well as increase freedom of movement
Split Saddle Strap included
A set of the 18lb capacity mesh weight pouches are included
Are Zeagle BC’s worn differently?
Yes. Because of the uniqueness of the design, the Zeagle System will fit quite differently from a conventional BC. The waistband will be lower, well below the diaphragm (so it won’t restrict your breathing), the front of the BC is open, reducing restrictions further, and the buoyancy is low down on the back and sides, where it can expand outward without compressing your chest. The result is greater comfort and a more balanced attitude in the water.
Why do you put the weights in the BC?
Including the weights as part of the buoyancy system improves balance and comfort in the water- it keeps your body from being pulled in different directions by the opposing forces of lift and weights. All Zeagle BC’s since 1982 have been designed to be weight integrated.
How do you drop the weights in an emergency?
Zeagle’s patented Ripcord system allows for a single point instantaneous release of the weights from almost any position in the water. When compared to a weightbelt release or the two handed systems used on many other weight integrated BC's the Ripcord is far simpler and more reliable. Some BC's offer a more economical pull out system that requires a two sided release to drop all the weights.
Isn’t it too heavy to lift?
In most circumstances we recommend that the diver put on their BC first, then place the weights in the weight pockets. This avoids having to lift the entire scuba system and weights together.
What’s the Personal Fit System?
People come in more than five sizes- the Personal Fit System is a system of interchangeable components that allows your Zeagle dealer to custom fit a buoyancy system to your body and your style of diving. In addition to fitting waist size, chest size, and torso length independently, we can adjust the style of various components and the amount of lift in the buoyancy system to match the type of diving you do.
Do you make BC's for women?
Zeagle’s Personal Fit System was designed with women in mind. It’s very common for women to fit a size smaller in the shoulder section of a Zeagle BC than they fit in the waist size- a medium waist with small shoulders, for example. On our heavy duty BC's we offer narrower women's shoulder sections with smaller buckles that will fit women's upper bodies better. Of course the advantages of weight integration and doing away with the weightbelt are often even greater for women than for men. The greatest difficulty in properly sizing a woman's Buoyancy System is not finding a smaller size, or allowing for the bust, but lies in the fact that women's bodies have a defined waist where a waistband must fasten in order to secure the BC. At the same time, women tend to have both a shorter torso length and a lower center of buoyancy compared to men. So conventional buoyancy systems,which would ideally be worn lower for best balance and comfort, must be worn higher, around the narrowest part of the waist, in order to be secure. Zeagle has two BC models specifically designed with these considerations in mind; - The Zena is an extremely light and comfortable BC, ideally suited for warmer water diving. It is designed and constructed to be worn over a bathing suit or light warm water suit. The Zena's twin waist and hip band system provides a way for women to securely position the weights and buoyancy below waist level, around the body's center of buoyancy. - The LaZer is a heavier-duty BC with the same ideal fit for a woman's body shape. It is still considered to be a travel BC and can be worn over a bathing suit, but it is also made to be worn over a wetsuit or drysuit that might be needed in local diving conditions. It has all the features of the very popular Stiletto BC, but with a vest that is scooped at the rear to comfortably accommodate a shorter torso and wider hips than a Stiletto.
Will it float you face down?
Zeagle BCs are designed to fit low on the body so the lift is positioned near the body’s center of buoyancy. This results in a very neutral surface flotation, leaving the diver free to assume any position in the water. Many non-Zeagle rear flotation BC’s fit high on the chest, the same way most nonintegrated jacket style BC’s fit. In addition to being less comfortable, this volume of lift high on the back can cause the diver to be rotated forward when attempting to stay upright on the surface.
Can I wear a weightbelt with a Zeagle?
It isn’t necessary, and it adds bulk and weight.
Which BC is best for me?
Zeagle makes buoyancy systems for everyone– from the occasional vacation diver to the most professional Search and Recovery divers. Your dealer can help you select a system and appropriate accessories based on you size, experience, diving environment, the kind of diving you do, and the kind of diving you want to do in the future.
What about construction and warranty?
All Zeagle Buoyancy Systems are hand sewn from the best available materials and heavily reinforced at all stress points. Our style of construction is labor intensive and expensive, but it results in a more durable, better fitting BC. Individual components of the system are replaceable or repairable if damaged. This quality of construction makes it possible for us to offer a limited lifetime warranty to the original purchaser. If a defect appears or the system fails at any time while you own it, Zeagle will repair or replace the system free of charge.
Where can I get user's guides for Zeagle Products?
Downloadable versions of product owner's manuals are in PDF format, which is a file format that can be viewed and printed from virtually any computer platform.
LIMITED LIFETIME GUARANTEE TO THE ORIGINAL OWNER, OFFERED THROUGH MANUFACTURER
Your BC is guaranteed against defects in materials and workmanship. This guarantee does not cover damages from accident, abuse, neglect, alterations, improper usage, normal wear & tear or failure to provide reasonable care. To validate your warranty you must fill out and return your warranty registration by regular mail or e-mail, within 30 days of purchase. All warranty claims will be handled through Zeagle, or an authorized Zeagle Dealer.
here is the serial number on my BC?
In 2009 we began serializing the bladder assembly of our BCs. To find the serial number look at the left side (your right if you were wearing the BC) in between the vest and bladder. Roughly where the top tank band is inserted into the vest you should see a 1.5' long white tag with the serial number stamped onto it. If you do not see this tag you can select 'My product does not have a serial number' when registering your BC.
How can I set my BC up for Twin Cylinders?
All Zeagle Heavy-Duty Ballistic BCs (Ranger, Ranger LTD, Tech, 911, SAR) as well as backplate systems, can be used with twin tanks. The easiest method is to use the Twin Cylinder Mounting Plates.