BUY THIS...

Bare Nex-Gen Pro Drysuit 010105-S 066953

GET THIS FREE


Video: Bare Nex Gen Pro Dry Scuba Diving Drysuit
Mfg Part #: 010105

Bare Nex-Gen Pro Drysuit

Options: 
 $1,199.95 
  • Brand new & completely redesigned
  • Not like most other sites that sell the old discontinued model
  • Free Cargo Backpack Bag Included
  • Nex-Gen welded fabric throughout
  • Rear shoulder entry
  • Latex neck and wrist seals
  • Compression-resistant soft boot
  • Soft plate wear-resistant knee pads and shoulder pads
  • 360 degree swivel inflator valve and adjustable low profile exhaust valve
  • Includes LP Hose
  • MENS SIZES: Small through 3XLarge
  • WOMENS SIZES: XSmall through XLarge
  • MENS COLOR: Black with Red graphics
  • WOMENS COLORS:Black with Red graphics
  • Compression resistant socks included - for recommended Trek Boots - see below to order
  • FULL LIMITED LIFETIME MANUFACTURER'S WARRANTY

BARE TREK boots sold separately click here to order

Customer Reviews for Bare Nex-Gen Pro Drysuit:

See the top 20 most helpful scuba gear reviews

Average Customer Review: based on 4 reviews.

Rating: international orders
Reviewer: John E.
Its always amazed me that I can buy a Canadian made product cheaper in the States than here at home. The order and shipping departments severely fouled up with my order sending it as two separate shipments and not itemizing the valuation on each. As a result, I paid the import taxes twice. This added an extra $72 to the cost of my order which was rather upsetting, but such is life. Ill be more careful when ordering in the future. As for the dry suit, its exactly what I was looking for. Thanks John E.

Did this Review help?
No
Yes

80 out of 163 people found this review helpful.

Rating: Excellent suit for the price
Reviewer: Steve F.  -  View all my reviews
I just purchased this suit last month and have been diving in it about 20 times already and it is great. No leaks, and the T-100 polarwear paired with some underarmour keeps me nice and warm even in 40 degree water. The material this suit is made of is strong and I am confident it will last a long time. It fits perfect, the automatic exhaust valve works great and easy to use. The only thing I wish it had was a pocket or two, but I am planning on buying two bare bellows pockets and gluing them on, so its not a big deal. Overall for the price, you cant go wrong with this suit. This was my first drysuit purchase and I am extremely happy with my decision. When diving in cold water, I am never going back to a wetsuit again! I would recommend this suit to anyone.

Did this Review help?
No
Yes

647 out of 1134 people found this review helpful.

Rating: Great suit
Reviewer: micah dolina
This suit is one of the better suits ive owned. very flexible and economical

Did this Review help?
No
Yes

239 out of 516 people found this review helpful.

Rating: Awesome
Reviewer: Brad S.
This is my first dry suit and I love it! It has made winter diving possible in the Pacific NW. Great investment! No leaks, goes great with bare super hi-loft thermal.

Did this Review help?
No
Yes

391 out of 653 people found this review helpful.

Questions and Answers for Bare Nex-Gen Pro Drysuit:


  • Kf:

    Do u have stock for small size? And how long does it take to be delivered to hong kong?

    Bob  (Certified Scuba Instructor at Scuba.com):

    For questions about product availability please contact our instructors at info@scuba.com or 800-34SCUBA

  • MARCEL:

    Hi. My measures are: 6,03 ft 200 lbs chest 46 waist 38 I think the XL is short for my chest and 2xl is very big. What do you think? Wich is the correct size for me? Please, help me. Thanks a lot!

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Marcel, the 2XL would be a better fit on you. Plus you will have some extra room to put on undergarments if you choose to do so.

  • Shayne:

    Can one hookah dive with a drysuit? If so, is there a special suit or bcd that must be used?

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Shayne, yes you can dive with a hookah in a dry suit, but if you want to inflate the dry suit you will need to carry a pony bottle to inflate the suit.

  • Chetan:

    Why do certain things in the description talk about Neoprene? From the technical details it seemed like there was no neoprene involved. Like even the seals were latex. Im severely allergic to Neoprene and I just want something completely free of neoprene.

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Chetan, the dry suit socks are made of neoprene.

  • MARCEL:

    Hi. I am very interested in this drysuit. But not sure about the size. My measurements are: height: 6,03 ft weight: 200 lbs chest: 46 inch waist: 38. What is the best for me? L or XL? Thanks a lot.

    Aaron  (Certified Scuba Instructor at Scuba.com):

    Hi MARCEL, we would recommend the XLarge-Tall.

NEX GEN PRO DRY - MENS

OVERVIEW

Offered with many popular features as standard, this suit offers style and durability at an excellent price. LIFETIME GUARANTEE.

STORY

At BARE we take our commitment to product quality seriously. Our drysuits in particular are legendary for their durability and longevity with many of our customers getting a full lifetime of use out of their BARE drysuit before passing it on to a friend or family member. This has allowed us to offer something that no other drysuit manufacturer has been able to do: a Lifetime Guarantee on seams and workmanship. Much more than a warranty, BARE is the fi rst and only drysuit manufacturer to offer a Lifetime Guarantee. Except for normal wear and tear, misuse or negligence, BARE will honor all claims against seams and workmanship for the life of the drysuit worldwide. Even if you’re not the original owner, you’re covered.

In a category where the next closest competitor only offers a 7-year warranty, we think you’ll agree that the BARE Guarantee says something quite extraordinary about the quality of the workmanship, materials and technology that goes into each and every one of our drysuits. We stand behind our workmanship like no one else because you deserve a product like no other.

FEATURES AND BENEFITS

Trimmable latex neck seal
360 degree swivel inflator valve (default placement on the
center of the chest)
Adjustable low-profile exhaust valve (default valve
placement on upper left arm)
HD Bottleneck latex wrist seals with talc bag
MELCO T5500 knee protection with 1mm neoprene
backing providing added padding for comfort
Delivered with compression-resistant Soft Boot
Screened graphics
LIFETIME GUARANTEE*

TECHNICAL SPECIFICATIONS + SIZING

Material:
BARE's exclusive lightweight, waterproof Nex-Gen welded
fabric (abrasion resistant nylon/polyurethane bilaminate)
Innovation:
Exclusive SWT (Seam Welded Technology)
Entry:
Easy entry back zipper with internal protective flap
Sizing Chart
Sizes: S, MShort, M, MTall, MLShort, ML, MLTall, LShort, L, LTall, XLShort, XL, XLTall, 2XLShort, 2XL, 3XL

WATERSPORTS//SUPPORT//CONSUMER//MAINTENANCE AND CARE FAQS
DRYSUITS

BARE offers divers a series of drysuits manufactured from a wide range of materials including Neoprene, Butyl Trilaminate and Polyurethane. This range offers the diver the choice of basic suit material and construction that best meets his or her requirements.

How do I maintain the zipper on my drysuit?

Before each dive lubricate the zipper, follow the instructions on the container of zipper lubricant supplied with your suit.

Open and close the zipper a few times after the lubricant is applied to the zipper chain. The friction caused by the slider traveling over the teeth heats the lubricant causing it to flow into the teeth.

Apply a small amount of silicone grease to the sealing surface of where the slider completes the closure of the zipper. This is called the docking end of the zipper. The rubber ridges that can be seen on the inside of the docking end are where the grease should be applied. Also make sure that this area is clean and free of any other materials that may affect the seal.

Note: Always inspect the zipper for any foreign material that may affect its ability to close and create a watertight seal.

What do I need to do after the dive?

Close the zipper and rinse the outside of your drysuit with clean, fresh water. Rinse any of the inner surfaces that may have come in contact with salt water, such as the neck seal and wrist seals. Make sure that any sand, dirt, or gravel is washed away from the teeth of the zipper.

Open the zipper and hang the suit (if possible) over a piece of plastic pipe. A drysuit hanger can easily be made by passing a rope through a plastic pipe of about 3 to 4 inches in diameter and fastening both ends of the rope to an area where you can leave your suit to dry.

Note: Never leave your drysuit in direct sunlight. Ultraviolet radiation from the sun or florescent lighting will deteriorate neoprene and rubber materials (seals) very quickly. Prolonged exposure to direct sunlight will substantially lessen the life of all scuba equipment.

How should I store my drysuit?

The best way to store your drysuit is to leave it on its drying hanger in a cool, dry, dust-free area. If the suit must be stored otherwise; once it is completely dry inside and out, lay it on the floor with the zipper facing downward. Turn the boots inward and loosely rollup the legs and torso to the base of the neck seal. Bring the arms together over the top of the rolled suit so that the open zipper forms an arch as it does while you are wearing the suit. Slide the suit into its carrying bag and store it so that nothing else will be put on top of the bag.

Note: Both Neoprene and Butyl and Butyl Trilaminate materials can be damaged by exposure to petrochemical products such as gasoline/petrol, many industrial solvents, and cleaning solutions containing solvents. Avoid exposure to these chemicals during use of the drysuit and when cleaning.

Should the suit become heavily soiled, or exposed to grease, oil, etc., DO NOT CLEAN THE SUIT WITH SOLVENTS OR SOLVENT BASED CLEANERS OR DEGREASERS. You may use warm water and detergent based soaps to remove the stains. Be sure to rinse all the soap residue out with clean fresh water. Failure to follow these instruction can result in delamination and degradation of the materials.

What do I do about a leak in my drysuit?

There are many variables that must be investigated when dealing with leaks in a drysuit. Very often a leaking drysuit is not the fault of the suit itself. Usually, but not always, the cause of a leak can be determined when all of the events related to the doffing, donning, and diving with the drysuit are carefully and objectively reviewed.

For example, a diver may discover that her left foot is wet after a dive. The immediate and natural conclusion is that the suit is leaking in the left boot. The suit is checked for a leak in the left boot but no leak is found. The next time the suit is used the divers left foot stays dry. This is a very common occurrence. What often happens in this situation is that the undergarment, either a sock or an attached underwear booty is wet prior to putting it into the boot of the drysuit. During the dive the moisture eventually travels through the layers and appears as if it became wet during the dive.

The underwear boot could have become wet from being in contact with a wet piece of equipment during transport, or from stepping on wet ground prior to putting on the drysuit. Another possible cause could be water that entered the suit when it was rinsed after the last dive. Often a leak in a drysuit is clearly visible when the suit is tested, but sometimes other factors that may be determined from objective analysis are the cause.

Troubleshooting Leaks

Zipper

Problem: Wet arm, shoulder area, and crotch
Possible Cause:

Zipper not totally closed
Undergarment caught in zipper teeth
Zipper dirty (grit, lint, sand, salt, etc.)
Zipper is worn-out, damaged or broken
Other Causes:

Leaking wrist seal (water is migrating to zipper area)
Leaking neck seal
Leaking exhaust valve
Possible Solutions:

Make sure zipper is completely closed
Check undergarment for signs of being caught in the zipper
Make sure the zipper (inner teeth and outer chain) are free from debris and well lubricated
Check zipper for missing teeth, worn-through areas, or if the zipper is broken
Seals

Problem: Wet arm(s), chest and shoulder area, and crotch
Possible Cause:

Neoprene seal not tucked inward enough or at all
Undergarment disrupting the integrity of the seal
Seals may not be the correct size
Seals may be torn, split, delaminated from suit or punctured
Hair under the neck seal
May be other leak, see rest of troubleshooting
Possible Solutions:

Review instructions in the “Donning and Doffing” section of this manual
Replace the seals if they are damaged or stretched far beyond their original size, or have them altered to fit correctly
Valves

Problem: Wet arm(s), chest and shoulder area, and crotch
Possible Cause:

Valve not tightened securely to suit
Valve port delaminating from the suit
Valves are dirty or contaminated with lint from underwear
Internal diaphragm of exhaust valve damaged or displaced
May be another leak, see rest of troubleshooting
Possible Solutions:

Tighten the valve to the suit by holding the outer section and turning (clockwise) the inner section
Re-glue the valve port to the suit or return the suit for service

View all Bare Dry Suits

Choose Currency:

Scuba.com, 1752 Langley Avenue, Irvine CA 92614

US and Canada 800.347.2822
International 001.949.221.9300