|
|
|
Use the scroll bar on the right to scroll down and see more products -->
|
Mfg Part Number : Max-Air 35-E1-110-SCUBA (3000psi) |
Customer reviews
- Time required to fill an 80 cu. ft. cylinder from 500 to 3000 psi - 20 min
- Only 85 LBS with Carrying Handles
- 3.5 CFM @ 3200 PSI
- Oil/water separating chambers
- Tri-Chem breathing air purification system
- Disposable purification cartridge is convenient and easy to replace.
- Digital hour/tachometer standard on gasoline model
- Final Pressure Gauge (liquid filled, stainless steel)
- Pressure maintaining valve (Priority valve)
- Pressure Relief valves
- One (1) filling hose with on/off valve and push-button bleed for SCUBA yoke or DIN300
- Intake filter
- 6-foot Intake Hose with fittings (gas model)
- LUBRICATION: Splash lubrication with oil thrower pin
- OIL TYPE: Max-Air #101 oil synthetic compressor oil
- OIL CAPACITY: 12 oz
- DIMENSIONS: 28" L x 13" D x 15" H
- Honda Engine
- Electric-See below to upgrade
- Electric 3 Phase is for Industrial and Yacht, 1 Phase/110 is for homes, 1 Phase 220 is for Industrial, and Gas is portable
FULL MANUFACTURER'S WARRANTY
Failure to complete Diver Certification prior to use of this product, may result in injury or death
For more information click here
| | Retail: $3,595.00
You Pay:
$3,154.95
You Save:
$440.05
|
|
Mfg Part Number : Max-Air 90 STD-D |
- Tri-chem breathing air purification system
- Disposable purification cartridge is convenient and easy to replace
- Manual condensate drains
- Pressure maintaining valve
- Pressure relief valve on all stages
- Intake filter
- 51 oz. (1.5 Lt) break-in oil
- 51 oz. (1.5 Lt) Max-Air 101 synthetic compressor oil
- Spare parts list and owners manual
- (2) Filling hose with on/off valve push button bleed (SCUBA yoke or DIN300 or SCUBA)
- 6' intake hose with fittings (gas/diesel models only)
- One year warranty
- Mounted on a free standing, shock mounted frame of heavy duty, powder coated steel
- MAX PRESSURE: 5000psig-340bar
- APPROX. OUTPUT: 9.0 F.A.D. 10.8 scfm charging rate
- Drive motors AC electric motors in single or three phase 9 hp Honda gasoline or 9 hp Yanmar diesel
- Time required to fill an 80 cu. ft. cylinder from 500 to 3000 psig - 7.5 min
- WEIGHT: 336 lbs
- Note: Diesel Compressors cannot be shipped by air
FULL MANUFACTURER'S WARRANTY
| | $9,794.95
|
|
Mfg Part Number : Max-Air 55e1 |
- Time required to fill an 80 cu. ft. cylinder from 500 to 3000 psig - 12 min
- Tri-chem breathing air purification system
- Disposable purification cartridge is convenient and easy to replace
- Manual condensate drains
- Pressure maintaining valve
- Pressure relief valve on all stages
- Intake filter
- 51 oz. (1.5 Lt) break-in oil
- 51 oz. (1.5 Lt) Max-Air 101 synthetic compressor oil
- 6' intake hose with fittings (gas models only)
- One year warranty
- Mounted on a free standing, shock mounted frame of heavy duty, powder coated steel
- MAX PRESSURE: 5000psig-340bar Approx. Output: 5.5 F.A.D. 6.6 scfm charging rate
- Drive motors AC electric motors in single or three phase 6.5 hp Honda gasoline
- WEIGHT: Gas - 256 lbs, Single phase - 320 lbs, Three phase - 268 lbs
- Electric 3 Phase is for Industrial and Yacht, 1 Phase 220 is for Industrial, and Gas is portable
FULL MANUFACTURER'S WARRANTY
Click here to order Compressor Oil
Failure to complete Diver Certification prior to use of this product, may result in injury or death
| | $7,295.95
|
|
Mfg Part Number : Max-Air 180 Twin |
- High capacity breathing air compressor system from MAX-AIR designed for total efficiency
- The Max-Air 180 Twin is designed specifically for fire departments, dive centers, industrial, marine, police and military applications who demand high volume with fail-safe redundancy
- Consisting of two totally independent air systems in one fully enclosed sound attenuated cabinet
- You will not find a more compact 18.0 F.A.D., 21.6 scfm compressor anywhere
- (2) electric, 7.5 hp, 220/440Volt AC, three phase motors available in 50 or 60hz
- (2) Independent, tri-chem breathing air purification systems with activated carbon/molecular sieve/hopcalite
- Durable powder coated, fully enclosed, sound attenuated cabinet
- Dual, deluxe main control panels
- Exclusive Dial-A-Pressure (D.A.P.) final pressure switch and gauge assembly allows for quick finger tip pressure settings and automatic shut off
- (2) Hour meters
- (2) Magnetic starters with thermal overload protection
- (2) External oil level sight glass indicators with oil drain
- (2) Automatic and Manual Purge (A.M.P.) condensate drain systems with collectors
- (1) Final pressure gauge (0~5800psig)
- (2) Pressure maintaining valves
- Pressure relief valves at all stages
- (4) High pressure filling hoses with on/off valve and push button bleed for SCUBA or SCBA
- One year warranty
- Mounted in a sound attenuated, powder coated steel cabinet
- Max Pressure: 5000psig-340bar
- Approx. Output: 18 F.A.D. (21.6 scfm charging rate)
- Drive motors: Two - 7.5hp 220./440 volt AC electric motors in three phase 50 or 60hz
- Time required to fill an 80 cu. ft. cylinder from 500 to 3000 psig - 3.7 min
- WEIGHT: 700 lbs
- DIMENSIONS: Length 35" x Depth 33 1/2" x Height 53"
- Electric 3 Phase is for Industrial and Yacht
FULL MANUFACTURER'S WARRANTY
Click here to order Compressor Oil
Failure to complete Diver Certification prior to use of this product, may result in injury or death
| | $19,595.95
|
|
Mfg Part Number : Max-Air 90SFD-6000E1 |
- Fully automatic
- Continuous duty unit
- Capable of filling up to 6000psi
- Cascade storage cylinder compatible or 4500psi SCBA's
- Designed to refill SCUBA, SCBA
- Disposable tri-chem breathing air purification system (65 hours between changes)
- Dual fill outlets - one for direct fill, one for cascade bottles - cascade bottles sold separately
- Two each fill hose assemblies for SCBA or SCUBA with on/off valves and bleeder valves
- Automatic and manual condensation purge/drain system
- Seamless stainless steel plumbing throughout
- Automatic off/auto switch, automatically refill cascade as needed
- Final automatic shut off pressure switch
- Digital hour counter
- Pressure safety relief valve at all stages
- Time required to fill an 80 cubic foot cylinder from 500 to 3000 psi - 7.5 minutes
- MOTOR: 7.5hp electric motor
- VOLTAGE: Available in single phase 208/230 volt AC or three phase 208/230/460 volt AC 60Hz (see below to order)
- MAX PRESSURE: 6000psi
- APPROXIMATE OUTPUT: 9.0 F.A.D. 10.8 scfm charging rate
- LUBRICATION: Splash lubrication
- OIL TYPE: MaxLube 501 synthetic compressor oil
- NOISE LEVEL: 81 decibels at 3 meters
- COMPRESSOR RPM: 1550 RPM
- OIL CAPACITY: 57oz.
- DIMENSIONS: 48-3/4" x 28" x 36"
- WEIGHT: 500 lbs
FULL MANUFACTURER'S WARRANTY
Failure to complete Diver Certification prior to use of this product, may result in injury or death
| | $15,194.95
|
|
Mfg Part Number : Max-Air 90SE1-5000 |
- Fully automatic
- Continuous duty unit
- Capable of filling up to 5000psi
- Cascade storage cylinder compatible
- Designed to refill SCUBA, SCBA(separate fill adapter required) and Paintball (separate fill adapter required) cylinders
- Disposable tri-chem breathing air purification system
- Dual fill outlets - one for direct fill, one for cascade bottles - cascade bottles sold separately
- Two fill hose assemblies for SCBA or SCUBA with on/off valves and bleeder valves
- Automatic and manual condensation purge/drain system with 1 gallon liquid container
- Seamless stainless steel plumbing throughout
- Automatic off/auto switch, automatically refill cascade as needed
- Final automatic shut off pressure switch
- Digital hour counter
- Pressure safety relief valve at all stages
- Time required to fill an 80 cubic foot cylinder from 500 to 3000 psi - 7.5 minutes
- MOTOR: 7.5hp electric motor
- VOLTAGE: Available in single phase 208/230 volt AC or three phase 208/230/460 volt AC 60Hz (see below to order)
- MAX PRESSURE: 5000psi
- APPROXIMATE OUTPUT: 9.0 F.A.D. 10.8 scfm charging rate
- LUBRICATION: Splash lubrication with oil thrower pin
- OIL TYPE: MaxLube 501 synthetic compressor oil
- NOISE LEVEL: 81 decibels at 3 meters
- COMPRESSOR RPM: 1550 RPM
- OIL CAPACITY: 57oz.
- DIMENSIONS: 44" x 28" x 35"
- WEIGHT: 480 lbs
FULL MANUFACTURER'S WARRANTY
Failure to complete Diver Certification prior to use of this product, may result in injury or death
| | $11,494.95
|
|
Mfg Part Number : Max-Air 90SE3-FD5000 |
- Fully automatic
- Continuous duty unit
- Capable of filling up to 5000psi
- Cascade storage cylinder compatible - sold seperately
- Designed to refill SCUBA, SCBA (separate fill adapter required) and Paintball (separate fill adapter required) cylinders
- Disposable tri-chem breathing air purification system
- Dual fill outlets - one for direct fill, one for cascade bottles - cascade bottles sold separately
- Two fill hose assemblies for SCBA or SCUBA with on/off valves and bleeder valves
- Automatic and manual condensation purge/drain system with 1 gallon liquid container
- Seamless stainless steel plumbing throughout
- Automatic off/auto switch, automatically refill cascade as needed
- Final automatic shut off pressure switch
- Digital hour counter
- Pressure safety relief valve at all stages
- Deluxe interstage gauge panel with stainless steel gauges
- Low oil shut down switch with fault indicator light
- High temperature shut down switch with fault indicator light
- Carbon monoxide/moisture visual indicator mouted on gauge panel
- Time required to fill an 80 cubic foot cylinder from 500 to 3000 psi - 7.5 minutes
- MOTOR: 7.5hp electric motor
- VOLTAGE: Available in single phase 208/230 volt AC or three phase 208/230/460 volt AC 60Hz (see below to order)
- MAX PRESSURE: 5000psi
- APPROXIMATE OUTPUT: 9.0 F.A.D. 10.8 scfm charging rate
- LUBRICATION: Splash lubrication with oil thrower pin
- OIL TYPE: MaxLube 501 synthetic compressor oil
- NOISE LEVEL: 81 decibels at 3 meters
- COMPRESSOR RPM: 1550 RPM
- OIL CAPACITY: 57oz.
- DIMENSIONS: 44" x 28" x 35"
- WEIGHT: 480 lbs
FULL MANUFACTURER’S WARRANTY
Failure to complete Diver Certification prior to use of this product, may result in injury or death
| | $12,594.95
|
|
Mfg Part Number : Max-Air 90D-ES STD |
- Time required to fill an 80 cu. ft. cylinder from 500 to 3000 psig - 7.5 min
- Tri-chem breathing air purification system
- Disposable purification cartridge is convenient and easy to replace
- Manual condensate drains
- Pressure maintaining valve
- Pressure relief valve on all stages
- Intake filter
- 51 oz. (1.5 Lt) break-in oil
- 51 oz. (1.5 Lt) Max-Air 101 synthetic compressor oil
- 6' intake hose with fittings (gas/diesel models only)
- One year warranty
- Mounted on a free standing, shock mounted frame of heavy duty, powder coated steel
- MAX PRESSURE: 5000psig-340bar
- APPROX. OUTPUT: 9.0 F.A.D. 10.8 scfm charging rate
- Drive motors AC electric motors in single or three phase 9 hp Honda gasoline or 9 hp Kohler diesel
- WEIGHT: Gas - 276 lbs, Diesel - 336 lbs, Single phase - 336 lbs, Three phase - 276 lbs
- Electric 3 Phase is for Industrial and Yacht, 1 Phase 220 is for Industrial, and Gas is portable
FULL MANUFACTURER'S WARRANTY
Failure to complete Diver Certification prior to use of this product, may result in injury or death
| | $7,219.95
|
|
Mfg Part Number : YP35DF-M |
- Time required to fill an 80 cu. ft. cylinder from 500 to 3000 psi - 22 min
- 3.5 CFM @ 3200 PSI
- Fully automated system-user just connects tank and turns on
- Automatic shutdown when tank reaches target fill pressure (5000psi max)
- TEFC (Totally Enclosed Fan Cooled) motor keeps airborne elements
like salt air out of the motor and therefore lasting much longer
-
-
Fills up to four tanks simultaneously
-
Stainless steel pressure gauge
-
Kevlar reinforced high-pressure hoses with stainless steel fittings
-
Four filling hose with on/off valve and twist bleed for SCUBA yoke
-
Digital Frequency Drive - ramps up the compressors speed, eliminating the power in-rush characteristic of starting an electric motor
-
Advanced dual filtration system capable of processing 15,000 cubic feet of air to CGA Grade E standard (approximately 190 80cu.ft tanks)
-
Disposable purification cartridges are convenient and easy to replace
-
-
Compatible with 200-240v, 50 or 60Hz, 1 or 3 phase electric service
- OIL TYPE: CF-2000 synthetic compressor oil
- OIL CAPACITY: 12 oz
- DIMENSIONS: 36" L x 16" D x 17" H
- WEIGHT: Approx 150 lbs
-
Failure to complete Diver Certification prior to use of this product, may result in injury or death
| | $14,950.00
|
|