Failure to complete Diver Certification prior to use of this product, may result in injury or death
Average Customer Review: based on 5 reviews.Rating: NON-continous use
I need to know if you can send the compressor to Merida, Yucatan Mexico.
Hello Victor, yes you can order a compressor from us and have it shipped to Mexico. If you add all the items into your cart and the when you are ready to checkout. You are going to want to use the Amazon checkout. Then you are going to enter the billing and shipping information. Once you have all of that information you are going to hit the recalculate button and it will tell you what your shipping and duties will be to your location. If you have any other questions please feel free to give us a call at 1.800.347.2822.
How difficult would it be to ship this type of unit to the Philippines?
Please veiw our international shipping rates at http://www.scuba.com/ads/shipping.aspx#intshipping
If I want the Max Air 35 with the single phaze electric motor does it come "plug and play" or do I have to do some wiring? Also, how much is it with the electric motor?
I am looking for a compressor to be installed on a boat. Only place big enough is the engineroom. Whats your opinion on an 220v aplication being used when engineroom cool and air braught in from outside. Its a spacious stand up engineroom on large sportsfish.
Hello Nick, if you are going to be running it down in the engine room. Then you are going to need to make sure the the exhaust from anything be taken inside the air intake of the compressor. As long as that happens I do not see why you would not be able to fill a few tanks. Just to let you know this compressor is not designed to be running on a continued base. If you are only filling a few tank then turning it off to let it cool down before running it again. If you would like to place an order or have any other questions please feel free to give us a call at 1.800.347.2822.
if this compressor wasnt meant for continuous use, how many bottles can be filled before needing to shut down for cool down? @ approx 3 tanks an hour.
Curious if anyone has experience running the 110 V. electric version powered by twin Honda generators producing a 30 amp circuit when paired? Any problem with such a setup? I would like the versatility of either electric or gas (via generators that I already own.) Thanks!
Im considering purchasing this unit for use in a diesel vehicle. Id rather not carry gasoline - the vehicle will have a robust battery system and alternator. I can easily outfit the vehicle with an inverter to power the Max Air 35. Of course, a DC option would be ideal - is such an option available? If not, what would be your recommendation regarding use with an inverter? Id likely go for a 220V unit, standard voltage in my region, but Im uncertain what the practical difference between a single-phase and three-phase motor would be. Any experience with such an install?
What is the max wattage (likely the start-up wattage) of the single phase electrical version of this compressor? Id like to know if my generator has the capacity to run the electrical version.
Is there an adaptor for this compressor to use on 300 DIN valves. I have DIN and yoke valves.
Hello Shawn, to make this so it would fit both a Din and Yoke style tank you would need these two part also. http://www.scuba.com/scuba-gear-161/031768/Sherwood-Din-Fill-Adapter-with-Bleed-Valve.html and http://www.scuba.com/scuba-gear-37/034161/XS-Scuba-Din-To-Yoke-Regulator-Adapter.html.
I have 4 hp 120 tanks that I use on weekend trips regularly and my buddy has two. While we will mos often be filling two tanks then done sometimes we will have six tanks to fill is this unit acceptable for that use? I will be running 220 single phase.
Hello, this compressor is only able to fill to 3000psi.
HAve been reading up on the Max35. what would you recommend as I dont think this one will work. I usually fill 10 tanks at the end of the day, 80, 100, and a few 120s. My other compressor I had it to shut down at 3400PSI. would like to put more than 3000PSI in them. I had a double hook up where I could fill two tanks at a time. I have a secondary lawerance factor filter system as well. Thoughts would be appreciated. thanks
The Max Air 35 is designed more for personal use. Typically 1 or 2 tanks at a time once or twice a day. The Max Air 55 will meet your needs, but that''s stretching it a bit. It really isn''t designed for daily use but is more intended for weekend use. If that is a daily number or cylinders being filled, you''d be best served by the Max Air 90.
Max-Air® 35 STD Electric
4.2 scfm (7.1 m3/hr) / 4800 psi (330 bar)
(Single or Three Phase)
A compact, personal portable, high pressure, breathing air supply.
The Max-Air® 35 Standard is the most reliable, compact and portable compressor available today.
Ideal for home or boat use (8kW generator minimum required).
Economical to run and easy to maintain, the Max-Air® 35 will give years of high quality breathing air in locations where dive centers or air stations are not available.
ALSO AVAILABLE WITH STAINLESS STEEL FRAME!
Don’t forget to look at our ACCESSORIES!
Standard Features Included in Base Price
4.2 scfm (7.1 m3/hr)** – Fills an 80cft tank in approx 22 min*
Reliable 3HP, Single Phase 110V or 220V, 60 Hz electric motor
Truly portable at only 100 lbs (46 kg)
Dimensions: Length 28” x Depth 13” x Height 15”
Mounted on a durable powder coated steel frame with convenient carry handles
Oil/water separating chambers (manual drains)
Tri-chem breathing air purification system with activated carbon / 13X molecular sieve/ hopcalite
Disposable purification cartridge is convenient and easy to replace
Pressure maintaining valve for optimum air processing and prolonged cycle life
Final pressure relief valve
Oil filled pressure gauge 0~5800psi(400bar)
Filling hose with On/Off valve and bleed (SCUBA yoke, SCBA, DIN300 or Paintball)
12 oz.(0.35L) MaxLube 501 synthetic compressor oil
Spare parts list and owners manual
One year warranty
Factory Options not included in base price:
MI-4000 Air line visual moisture/CO indicator
CALL US!! All Stainless Steel Frame, Belt Guard and Fan Cover
Specifications Pumping Group
Construction: Air cooled, four stage, four cylinder high pressure, non-continuous duty, compressor, all stainless steel interstage and final stage coolers
Max. Pressure 4800psig (330bar)
Approx. Output: 3.5 F.A.D., 4.2 scfm (7.1 m3/hr) charging rate**
Max R.P.M.: 2800
Lubrication: Splash lubrication with oil thrower pin
Oil Capacity / Type: 12 oz.(0.35L) MaxLube 501 synthetic compressor oil
Drive Motor: Single Phase 3 HP 110VAC or 220VAC 60Hz Electric Motor
Noise Level: 87 dB at 3 meters
*Time required to fill an 80 cu. ft. cylinder from 500 to 3000 psig **Based on charging an 80 cu. ft. cylinder from 500 to 3000 psig *** Specifications and prices subject to change without notice