Average Customer Review: based on 3 reviews.Rating: Amazing FFM for the professional
If I wanted the ocean reef visor light on the space raptor, how much would it cost? Also, what kind of miflex hose would I want to get for it, and how long, to be connected to a DIN 1st stage with 5th port routing on a swiel turrent. thanks
Could you please help me with several questions: -is it now with the discount and the price for it is 555.95 USD? -do you have mask with the 1st stage not Yoke, but DIN for 300 bar. -do you have in set with mask the 2n stage? -how much is the ligher for it that is set into the mask? -how much is the mask ( Neptun Raptor) with the communicators? -and question is about delivery? What price and amount of days will be for delivery 1. Russian federation, Kaliningrad, 236000 2.Russian federation, Moscow 3. Belgium , Waregem. Thank you in advance/ Julia
For more detailed answers, including current pricing and availability please contact our instructors at firstname.lastname@example.org The Ocean Reef Masks come with the 2nd Stage integrated into the mask. The 1st Stage is available in DIN or Yoke and is offered separate.
Can the Raptor be used with surface-supplied rigs like cage diving operators use, or is it strictly for use with a cylinder?
This mask is set up for use with scuba tanks (140psi). The hookah mask can be use off a compressor set for about 50-60psi. http://www.scuba.com/scuba-gear-124/029052/Ocean-Reef-Neptune-Space-Full-Face-Scuba-Dive-Mask-with-Hookah-2nd-Stage.html
Hi, Does the raptor requires to buy the SAV like the other neptune space masks? I am confused because I am reading that it is integrated thanks Gustavo
hi, i was about to place an order to buy a space raptor mask, along with lp hose,1st stage regulator and swivel however reading the manual it says that the sl35tx 1st stage is not compatible with nitrox. if so, what other 1st stage is nitrox compatible and i can use with the raptor? thanks for your reply gustavo
Hello Gustavo, yes the 1st you are asking about is not Nitrox ready. They do make a Nitrox only 1st. This would be Nitrox ready up to 40% out of the box. But if you would ever use standard air on the Nitrox 1st stage you would need to get that unit O2 cleaned before you can you Nitrox on that 1st stage.
The 1st stage that can be added is that just a hose and the part that hooks to the tank or is it a part of the mask like the front part
can the lens be adapted for vision precp. or how is poor vision remidied
Hello Kenneth, you would need to buy the: http://www.scuba.com/scuba-gear-124/028083/Ocean-Reef-Optical-Lense-Support.html. This is the frame you would have to have your lens installed in this then you would be able to mount these inside your Ocean Reef mask and have optical quality lens inside your mask.
Neptune Space Raptor
product code: OR025001 (S/M)
product code: OR025002 (M/L)Neptune Space Raptor
The RAPTOR is an O2 cleaned mask. The o-rings are composed of Viton and the o-ring lubricant is a Christo-lube oxygen compatible grease. The Neptune Space Raptor includes a Limited Lifetime Warranty. The Raptor distinguishes itself by the black Ixef ® polyaramide cover and the black orinasal mask, making it the ALL BLACK MASK.
State-of-the-art integrated regulator
Excellent visual field
Premium grade silicone rubber bellows-type skirt
Durable, scratch resistant visor
Newly designed quick release system
4 position adjustable exhaust valve
Patented 3-D equalization system
Six strap head harness with low elasticity and FRB (Fast Rotating Buckle)
Integrated surface air valve
Easy access purge button
Techpolymer protection treatments allow for use in extreme conditions
Total weight of 970 g (2.13 lbs) & a positive buoyancy of 296 g (0.65 lbs)
Can be used with a communication unit and Neptune System accessories
The Neptune Space visor is made of transparent polycarbonate. It is designed to be wider and sit
closer to the face than previous full face masks. This design maximizes the visual field, particularly
the peripheral area. The visible light transfer of the visor is 92%.
Required field of vision (effective) >40% of the natural field of vision – Space masks 71.80%.
Required field of vision (binocular) >50% of binocular natural field of vision – Space masks 80.68%
Italcert certification PPE-05 Rif 1332/05
The insert photos show the visual field of the Neptune Space compared with two competitor’s full
Durability and scratching resistance
The visor of the Neptune Space can resist the impact of a 6.35 mm steel ball traveling at speeds
of 540 kph (335 mph). The visor is coated on both sides with a siloxane resin to increase the
scratching and chemical resistance.
Tested by STANAG 4296 = resistance to the impact of a 325mg metal fragment with a speed of
240 m/s and Impact resistance test: 39.3 mm/254 g sphere from 1300 mm, no cracking or added
protection during transport, the Neptune Space comes with a removable protective shield (to be
removed before diving).
The head harness and FRB II
The head harness is directly attached to the face shield, allowing pressure to be distributed equally along the mask skirt.
The six straps of the head harness hold the mask in a firm position due to their low elasticity. The tip of each strap (rubber)
is wider, making them easier to grasp while wearing neoprene
gloves. The FRB II (Raptor and Space Fast Rotating Buckle) allows the mask to be donned and doffed quickly. Predator and
IRON MASK use an AISI 316 stainless steel with surface electric
treatment and AISI 316 stainless steel rollers.
The Neptune Space air circulation system is designed to minimize fogging and reduce the amount of CO and CO2
buildup. The silicone orinasal pocket is built with two one way valves through which air is inhaled. Exhaled air is directed through a valve under
the orinasal pocket, limiting the mixing of this air (containing high amounts of CO2) with the fresh air from the regulator. The direction of exhaled air is controlled by
a directional exhaust valve. This adjustable valve allows
exhaust to flow in four possible directions:
A - To the left
B - To the right
C - Both (direction of least resistance)
D - No exhaust
Position D, the “off” position is used when the diver is in a “head-down” position which, due to pressure on the
second stage, causes the regulator to free flow. Placing the exhaust valve in the off position causes pressure to
build in the mask, preventing free flow and returning the system to an “air on demand” situation.
Surface air valve
The Neptune Space is equipped with a surface air valve that allows the diver to breathe ambient air
while at the surface. The surface air valve is easily adjustable with large air vents. Draining and pressure equalization
Water that may seep into the mask is easily eliminated by exhaling or pushing the “purge” button on the 2nd
stage. Mask squeeze, a common problem for conventional masks, will not occur with the Neptune Space because the
pressure inside the mask is equal to the pressure outside the mask.
The 3-D equalization system
The patented OCEAN REEF 3-D equalization system is designed to allow easy equalization during a dive. The
system consists of a movable plate and two eccentric blocks (these blocks move close to the nostrils when the
upper part of the visor is pressed). When equipped with Visor Lights (see after), use the regulator to push the
mask toward your face, creating a nasal seal. The blocks plug the diver’s nose allowing equalization.
Before donning the mask, the blocks may be moved up or down depending on the length of the diver’s nose.
They may also be adjusted to fit wide or narrow noses. The system also includes three pairs of extenders (3,
6, 10mm long) which allow the distance between the blocks and the nose to be modified to accommodate
the diver’s face. The 3-D equalization system makes diving more comfortable and inhibits any undesired pressure during a dive.
The Neptune masks are equipped with a pneumatically balanced second stage providing a consistent ease of breath
at any tank pressure. An inhalation adjustment feature allows the diver to control air delivery under a variety of
diving conditions. The system works with 2 coaxial springs.
The Dive/Pre-dive (Venturi) lever reduces free flow on the surface and provides maximum air flow while at depth.
The Neptune Space mask complies with CE Certification in accordance with 89/689/EEC directives under the UNI
EN250 standard rules for underwater activities, including low temperatures (<50°F/ <10°C).