Innovative Fin Spring Strap (Pair) For Scubapro Twin Jet Fins RB-4551 012232

Mfg Part #: RB-4551

Innovative Fin Spring Strap (Pair) For Scubapro Twin Jet Fins

Options: 
Retail:
 $35.95 
You Pay:
$26.95
You Save:
$9.00
5 Questions
5 Answers
  • Retrofit your ScubaPro Twin Jet fins with this easy to use kit
  • Automatically adjust to the divers feet
  • Compensates for depth and compression of boot material
  • Unbreakable strap provides an amazing comfort and peace of mind
  • Rugged rubber grip with finger loop is easy to access, even with thick gloves
  • COLORS: Black, Grey, Blue, Yellow
  • Does NOT work with ScubaPro Twin Jet Max fins
  • FULL MANUFACTURER'S WARRANTY

Customer Reviews for Innovative Fin Spring Strap (Pair) For Scubapro Twin Jet Fins:

See the top 20 most helpful scuba gear reviews

Average Customer Review: based on 52 reviews.

Rating: Good And Easy
Reviewer: Brian A.
These are the easiest way to put your fins on period. If you do allot of beach diving like i do you know the importance of getting yours fins on and getting out of the surf zone.The only thing I found is to order a size smaller than your fin is. I have X-large fins and the large strap works great.

Did this Review help?
No
Yes

4 out of 8 people found this review helpful.

Rating: Great Straps!
Reviewer: Thomas C.  -  View all my reviews
these color-coordinated spring straps have received very good reviews on this site but i found them to exceed all reasonable expectations. fins are so much more easy to put on/take off now. these straps are very comfortable, holding your fins to booties just tight enough. installation will take about three seconds just unfasten your old, rubber straps and click these bad boys into place! comes will replacement strap assemblies for your fins but i used the ones that came with my twin jet fins with no problems.

Did this Review help?
No
Yes

16 out of 34 people found this review helpful.

Rating: Fantastic utility, but get ready to repair
Reviewer: adam k.  -  View all my reviews
Spring straps are everything people say they are. Fuss-free and immediate donning and removal of fins. However, the pull-loop on these particular straps does not look like its going to last very long. For the price, absolutely worth it though, and I already plan to replace them with strong nylon parachute cord and a soft plastic hose protector the moment they rip. Get these and be happy.

Did this Review help?
No
Yes

74 out of 151 people found this review helpful.

Rating: Spring fiin strap
Reviewer: Dawn F.
I have been wearing spring fin straps for 5 years so when my strap finally broke from constant use, I was determined to fin replacements ASAP. Thank you for delivering so quickly and these spring straps are performing beautifully.

Did this Review help?
No
Yes

35 out of 67 people found this review helpful.

Rating: Extended life for me and my Twin Jet fins.
Reviewer: Donald Rankin
I have enjoyed my Scubapro Twin jet fins for years, but with continued use in salt water dives the adjustable straps became stubborn, resulting in extra effort needed for putting on and taking off of the fins on scuba dives. With the Fin Spring Straps I am back to fully enjoying all of the positive aspects of the split fin design, better acceleration with less effort, longer swim times without fatigue and now added wear comfort on extended dives and really easy on and off with no struggle, which is important on a shore dive with surf and air tank attempting to upset me. D. Rankin, 70 years young.

Did this Review help?
No
Yes

55 out of 105 people found this review helpful.

Rating: fin spring straps
Reviewer: Jana M.
love them - I have been struggling with the WRONG straps sold by a dive shop and these are the right one!

Did this Review help?
No
Yes

7 out of 13 people found this review helpful.

Rating: A must have
Reviewer: Jorge S.
This add-on is a must have! Makes everything easy and safe! Totally recommended for twin jet fins!

Did this Review help?
No
Yes

10 out of 20 people found this review helpful.

Rating: springs for Scubapro Twin Jet Fins
Reviewer: Christopher Geller
Excellent item! They work great, however when you purchase them consider buying the springs one size smaller than your fin size. This comes in handy if you do a lot of warm water dives where you use a thinner booty. I am not saying anything negative about these springs, they are great!!

Did this Review help?
No
Yes

120 out of 271 people found this review helpful.

Rating: Innovative Fin Straps
Reviewer: Gary Doubleday
I purchase Two sets of the Fin strap , One for myself and the other set for my brother, what can i say about them . Wish i got them earlyer , they fit the scubapro Twin jet fins and they are so easy to put your fins on and to take them off . I have broken two set of Fin straps in the past , now i dont need to buy any more . you wont go wrong with these Innovative Fin Strap

Did this Review help?
No
Yes

147 out of 276 people found this review helpful.

Rating: Makes putting on fins much easier
Reviewer: Douglas H.
With heavy gloves and pounding surf, grabbing ScubaPro heel straps can be difficult. The Innovative springs go on much faster and easier. Hook a finger on the back loop and pull. Installing them is a cinch. Unbuckle the straps and buckle in the springs.

Did this Review help?
No
Yes

219 out of 391 people found this review helpful.

See all 52 customer reviews...

Questions and Answers for Innovative Fin Spring Strap (Pair) For Scubapro Twin Jet Fins:


  • Philip:

    Ref:Innovative Fin Spring Strap (Pair) For Scubapro Twin Jet Dive Fins Can you please inform me the length of size M and L.Thank you Regards Philip

    Bob  (Certified Scuba Instructor at Scuba.com):

    Unfortunately the true length is a measurement the manufacturer does not provide us. They are designed to match accordingly with the fin sizes to accomodate the users shoe size. Med is for men's size 8-10, Lrg is for men's size 9-12

  • Michael:

    My wife wears a size 7.5 shoe, has a pair of small scuba pro twin jets. What size spring strap should she get and is there a difference in sizes between the actuall scuba-pro model as opposed to the innovative for scuba pro.

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Michael, you are going to order the same size as your wifes fins. Going with an after market strap or the scuba pro strap they will both work for your wifes fins.

  • Lois:

    I have one of the orignal scubapro twin jet fins. Will this fit into the clamps for those?

    Elliott  (Certified Scuba Instructor at Scuba.com):

    Yes.

  • cesar:

    I owned a pair of Cressi Frog Plus fins M-L size and I was wondering if the following fin spring strap would fit: Innovative Fin Spring Strap (Pair) For Scubapro Twin Jet Fins. If not, What are my options? Thank you

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Cesar, you would need the: http://www.scuba.com/scuba-gear-113/012023/XS-Scuba-Universal-Spring-Fin-Straps.html. These are the ones that will fit your fins.

Spring Fin Straps

These stainless steel fin straps come with a limited lifetime warranty and are available in 5 attachment styles. All styles are available with either the rubber 'Comfort Grip' puller (provides heel cushioning and large grip for pulling straps on/off) or with black Tech Diver heel guard. Each style is available in 4 sizes.

ScubaPro Twin Jet: Comes with the mating ScubaPro male side of the buckle (ScubaPro female side is attached to the fin).

Older Twin Jet Fins have different female buckles mounted on the fins which do not mate with the newer male buckles installed on our spring fin straps. Our RB0521 4-piece replacement buckle pack is available to retrofit these fins with up to date female buckles which mate with our buckles.

View all Innovative Fins

Choose Currency:

Scuba.com, 1752 Langley Avenue, Irvine CA 92614

US and Canada 800.347.2822
International 001.949.221.9300