Zeagle Sar BC 7807RK 005665

Mfg Part #: 7807RK

Zeagle Sar BC

Options: 
 $1,544.00 
  • FREE split saddle harness crotch strap included
  • Integrated Ripcord Weight System - 40 lb capacity (Diver releasable)
  • 1050 Denier Ballistic Nylon
  • 65lb lift Ballistic bladder
  • Ten stainless D-rings (two adjustable)
  • Two zippered utility pockets
  • Built in lifting harness
  • Twin tank bands for single tanks included
  • Adjustable Sternum Strap
  • Lumbar Pad
  • Two storage pockets on bladder for extra long alternative air sources
  • SIZES: Small-XLarge
  • FULL MANUFACTURER'S WARRANTY

 

Customer Reviews for Zeagle Sar BC:

See the top 20 most helpful scuba gear reviews

No reviews found for this product.

Questions and Answers for Zeagle Sar BC:


  • Jeff:

    How does the Sar outperform the 911 Zeagle BCD? Would this Sar be too modified or over-loaded with extras for a beginner tech diver?

    Bob  (Certified Scuba Instructor at Scuba.com):

    For product comparisons and information on alternate products please contact our instructors at info@scuba.com. For information regarding the suitability of any bcd for a beginner or a learning environment it's always best to contact your instructor for advice on the particular gear for the specialty you are preparing to engage in.

p/n 7807RK SAR BC

The SAR BC, along with the 911 BC, was introduced in 1997 in response to many requests from Public Safety divers for systems designed to fit their needs.

The SAR BC is identical to the 911, except for the addition of a permanently installed lifting harness for helicopter, cliff, or swiftwater work.

It is based on the Tech BC platform, with a twin buckle front closure, but has additional features. These include SOLAS standard symbols on buckles, reflective trim on the bladder, additional D-rings, pockets for long octopus hose storage on each bladder wing, and an included split saddle harness.

The SAR has been proven to be a durable and flexible platform by a large number of public safety and military agencies in the US and abroad. Contact your Zeagle dealer for more information.

PFS sizing system
Single or twin cylinder capability
Two double pull waist buckles in front
1050 Denier Ballistic Nylon
65lb lift Ballistic bladder
36lb capacity Ripcord weight system
20lb capacity rear trim weight pockets
Adjustable sternum strap
Four Stainless Steel D-rings on shoulders,two adjustable
11' spaced grommets for mounting twin cylinder backplates
Two zippered utility pockets
Full integral lumbar pad
Six stainless steel D-rings on vest
Integral lifting harness and saddle strap
SOLAS reflective symbols on buckles
Reflective 3M ScotchLite® trim on bladder
Two hose storage pockets on the bladder
Airlock buckles
Articulated shoulder to reduce binding in the underarm and chest area as well as increase freedom of movement

Are Zeagle BC’s worn differently?
Yes. Because of the uniqueness of the design, the Zeagle System will fit quite differently from a conventional BC. The waistband will be lower, well below the diaphragm (so it won’t restrict your breathing), the front of the BC is open, reducing restrictions further, and the buoyancy is low down on the back and sides, where it can expand outward without compressing your chest. The result is greater comfort and a more balanced attitude in the water.

Why do you put the weights in the BC?
Including the weights as part of the buoyancy system improves balance and comfort in the water- it keeps your body from being pulled in different directions by the opposing forces of lift and weights. All Zeagle BC’s since 1982 have been designed to be weight integrated.

How do you drop the weights in an emergency?
Zeagle’s patented Ripcord system allows for a single point instantaneous release of the weights from almost any position in the water. When compared to a weightbelt release or the two handed systems used on many other weight integrated BC's the Ripcord is far simpler and more reliable. Some BC's offer a more economical pull out system that requires a two sided release to drop all the weights.

Isn’t it too heavy to lift?
In most circumstances we recommend that the diver put on their BC first, then place the weights in the weight pockets. This avoids having to lift the entire scuba system and weights together.

What’s the Personal Fit System?
People come in more than five sizes- the Personal Fit System is a system of interchangeable components that allows your Zeagle dealer to custom fit a buoyancy system to your body and your style of diving. In addition to fitting waist size, chest size, and torso length independently, we can adjust the style of various components and the amount of lift in the buoyancy system to match the type of diving you do.

Do you make BC's for women?
Zeagle’s Personal Fit System was designed with women in mind. It’s very common for women to fit a size smaller in the shoulder section of a Zeagle BC than they fit in the waist size- a medium waist with small shoulders, for example. On our heavy duty BC's we offer narrower women's shoulder sections with smaller buckles that will fit women's upper bodies better. Of course the advantages of weight integration and doing away with the weightbelt are often even greater for women than for men. The greatest difficulty in properly sizing a woman's Buoyancy System is not finding a smaller size, or allowing for the bust, but lies in the fact that women's bodies have a defined waist where a waistband must fasten in order to secure the BC. At the same time, women tend to have both a shorter torso length and a lower center of buoyancy compared to men. So conventional buoyancy systems,which would ideally be worn lower for best balance and comfort, must be worn higher, around the narrowest part of the waist, in order to be secure. Zeagle has two BC models specifically designed with these considerations in mind; - The Zena is an extremely light and comfortable BC, ideally suited for warmer water diving. It is designed and constructed to be worn over a bathing suit or light warm water suit. The Zena's twin waist and hip band system provides a way for women to securely position the weights and buoyancy below waist level, around the body's center of buoyancy. - The LaZer is a heavier-duty BC with the same ideal fit for a woman's body shape. It is still considered to be a travel BC and can be worn over a bathing suit, but it is also made to be worn over a wetsuit or drysuit that might be needed in local diving conditions. It has all the features of the very popular Stiletto BC, but with a vest that is scooped at the rear to comfortably accommodate a shorter torso and wider hips than a Stiletto.

Will it float you face down?
Zeagle BCs are designed to fit low on the body so the lift is positioned near the body’s center of buoyancy. This results in a very neutral surface flotation, leaving the diver free to assume any position in the water. Many non-Zeagle rear flotation BC’s fit high on the chest, the same way most nonintegrated jacket style BC’s fit. In addition to being less comfortable, this volume of lift high on the back can cause the diver to be rotated forward when attempting to stay upright on the surface.

Can I wear a weightbelt with a Zeagle?
It isn’t necessary, and it adds bulk and weight.

Which BC is best for me?
Zeagle makes buoyancy systems for everyone– from the occasional vacation diver to the most professional Search and Recovery divers. Your dealer can help you select a system and appropriate accessories based on you size, experience, diving environment, the kind of diving you do, and the kind of diving you want to do in the future.

What about construction and warranty?
All Zeagle Buoyancy Systems are hand sewn from the best available materials and heavily reinforced at all stress points. Our style of construction is labor intensive and expensive, but it results in a more durable, better fitting BC. Individual components of the system are replaceable or repairable if damaged. This quality of construction makes it possible for us to offer a limited lifetime warranty to the original purchaser. If a defect appears or the system fails at any time while you own it, Zeagle will repair or replace the system free of charge.

Where can I get user's guides for Zeagle Products?
We have available downloadable versions of product owner's manuals. These are in PDF format, which is a file format that can be viewed and printed from virtually any computer platform. If you don't have Adobe Acrobat Reader (necessary to view the files) it can be downloaded free of charge here.

BCs-

LIMITED LIFETIME GUARANTEE TO THE ORIGINAL OWNER, OFFERED THROUGH MANUFACTURER

Your BC is guaranteed against defects in materials and workmanship. This guarantee does not cover damages from accident, abuse, neglect, alterations, improper usage, normal wear & tear or failure to provide reasonable care. To validate your warranty you must fill out and return your warranty registration by regular mail or e-mail, within 30 days of purchase. All warranty claims will be handled through Zeagle, or an authorized Zeagle Dealer.

here is the serial number on my BC?
In 2009 we began serializing the bladder assembly of our BCs. To find the serial number look at the left side (your right if you were wearing the BC) in between the vest and bladder. Roughly where the top tank band is inserted into the vest you should see a 1.5' long white tag with the serial number stamped onto it. If you do not see this tag you can select 'My product does not have a serial number' when registering your BC.

How can I set my BC up for Twin Cylinders?
All Zeagle Heavy-Duty Ballistic BCs (Ranger, Ranger LTD, Tech, 911, SAR) as well as backplate systems, can be used with twin tanks. The easiest method is to use the Twin Cylinder Mounting Plates.

View all Zeagle Buoyancy Compensators

Choose Currency:

Scuba.com, 1752 Langley Avenue, Irvine CA 92614

US and Canada 800.347.2822
International 001.949.221.9300