Hollis Corrugated Hose
Hollis See all Hollis items
Top Rated Gear

Hollis Corrugated Hose

SKU: HLSCH
4.6
Be the first to review this item


Your Price

$19.95
Buy more and save
QTYPRICE

Discount will be reflected in Cart

Product Options

Call an Expert
Add to List Get Sale Alert

Please select size
In Stock  & Ready to Ship
Calculate Shipping Ship starting at

See all shipping options

Key Features

  • Designed for Hollis BCD power inflators
  • Made from quality rubber corrugated hose
  • Easy to use and install
See More Product Details
Hollis : Picture 1 regular

Hollis Corrugated Hose

Overview

About Hollis Corrugated Hose

Featured Reviews

See all 8 reviews
 

Suitable replacement - oval shape - sturdy (thick) rubber

By Edward S.

 -  Charlottesville, VA, US

Length as described. Oval cross section and thicker rubber than the hose I was replacing. That made it a little challenging to get through the hose keeper webbing on my wing but I managed.

 

Hollis Hose Replacement

By CHRIS C.

Great product - I used it to replace a hose on a Hollis BC - in order to make it longer.

Having the right spares on-hand when out diving can make or break a dive. Don't let a malfunctioning BCD corrugated hose ruin a day-of-diving, always carry a spare. This Hollis Gear rubber corrugated hose can get you out of a bind when you really need it. The hose is available in multiple lengths depending on your BCD requirements. Hose comes in 3-lengths of 13", 16" and 19" (33 cm, 40.6 cm and 48.3 cm). Don't forget to have a few spare tie-wraps for proper installment on-hand (see SKU: AQUTW10). Hose makes a great save-a-dive-kit item.

This product can only be shipped to U.S. addresses.

Warranty Information

This product has a limited warranty of 12 months.

http://www.hollisgear.com/support_warranty.asp

510-729-5110

Hollis Corrugated Hose Features

  • Designed for Hollis BCD Power Inflators
  • Don't Let a Malfunctioning BCD Corrugated Hose Ruin a Day-of-Diving
  • Always Carry a Spare
  • High Quality Rubber Corrugated Hose
  • Available in 3-Lengths: 13", 16" and 19" (33cm, 40.6cm and 48.3cm)
  • Note: Installation Requires Tie Wraps (see SKU: AQUTW10)
  • Great Save-a-Dive Kit item
Specs
Reviews (8)

Reviews about this item

Review Summary

Q&A

Questions & Answers

Questions about this item:

Shopper  will this hose work on an aqualung deminsion bc to replace its corrugated inflator hose?
Brice H  Yes it should work. I replaced the corrugated inflation hose on s seaports BCD.
RON R  I used this hose for my Oceanic BC to a Scuba Pro air 2 they use a 1 inch diameter hose need to check the size of your equipment you are attaching to. Im sure Aqualung can give you the diameter of the valve openings.
MARTIN M  I used it on my OMS wing. It fit perfectly.
ADAM P  I do not know the exact dimensions but most likely not. ECh manufactuer designs their part to fit their own devices. So an AquaLung BC should use an AquaLung Hose not A Hollis Hose.
CHRIS C  Sorry, I'm not sure - I used it to replace a Hollis hose - making it longer.
Shopper  Will the Hollis corrugated 16” hose fit my oceanic Hera bcd with atomic ssi inflator?
KEN H  According to my caliper, it will fit BCD/inflator connections with outside diameters of 1 inch (not including the protrusion that serves to hold the hose firmly in place).
Michael M  Is the length measured end to end or is it the corrugated section?
KENNETH F  I just measured it, answer is end to end.
Nathan R  I had to buy one a couple years ago, not sure about Hollis measurements but the one I bought was end to end.
JAMES E  End to end, total length.
JOHN R  End to end.
KEN H  Mike, The length is end to end. Ken
KWANGSU K  Hello! i use sms100. But broken my BC's jabara. is this[13'] same the jabara hose?
DAVID D  Im unsure of which hose is on your BC however I purchased this to replace the hose on my Scuba Pro X-Tec as I needed something a little longer. My concern at first was not seeing it and then getting a hose that was not made well. I received this hose via UPS and when I opened I found it is made very well and actually heavier then the Scuba Pro.
MICHAEL S  Hi, This hose is available id different length, you will need to select the one you need. Could you give more information about "jabara hose" What is it? This hose is a corrugated hose which connects your BCD inflator to the elbow valve of your BCD.
GARY M  As far as I know the if the hose diameter is the same it should work , I used same hose to replace my inflator hose in my old pst bcd and it works fine Hope the info is helpful
AARIN-CONRAD A  Would this replacement corrugated hose fit on an AquaLung BCD?
BRAD B  I have a zeagle ranger bcd and the stated length was the same as mine. When I got it it was a tad shorter than the one I replaced. My old one was also secured by two zippy ties, this one has one but it seems secure.
ELLEN BAUMAN Z  I suspect it will but you will have to re-string the cable from the inflator to the release value on your BC if you want that feature to work. Since my application was on a back plate that was not an issue.
JOE S  Should fit no problem
KEN H  If the fittings that the hose attaches to on your BCD and inflator are 1 inch outside diameter it will fit. The inside diameter of the hose is about .9 inch so that it stretches to fit snugly.
CHRIS C  I used it for a Hollis SMS 50 for sidemount diving. It was a different diameter hose than the SMS 50 had, but worked just fine. The SMS 50 had a hose that was almost oval shaped or an elongated "O", so I was nervous. But, it fit right on there no problem. I've since taken it to Truk and Palau with many dives - no issue.
GARY M  Yes , as long as it is the proper length and diameter .
SUE K  Don't know for sure just from the brand - the key here is the 1" internal dimension of this hose. If the external dimension of your fittings are 1", it should be the right diameter. The length is determined by the cable inside the hose that activates the upper (shoulder) purge valve on the BC, which is usually determined by a crimp on connector that forms the end loop.
Compare
top
Share this item: