Highland by XS Scuba Miflex Two Gauge Console

$220.00
$199.95
Availability: In Stock
Highland by XS Scuba's Miflex Two Gauge Console is a low profiled and ergonomically designed to fit in the hand comfortably, and is easy to read at a glance with...
QTY:
Availability: In Stock

Key Features

Ergonomically designed two gauge console
Easy to read graphics
Pressure gauge readout of 0 to 5,000 psi
Oil filled depth gauge
Depth gauge readout of 0 to 220 ft

Product Overview

Highland by XS Scuba's Miflex Two Gauge Console is a low profiled and ergonomically designed to fit in the hand comfortably, and is easy to read at a glance with its outstanding graphics. The pressure gauge has a chromed brass housing for strength and durability, and a luminescent gauge face for easy reading when night diving or in low light conditions. This compact gauge measuring a mere 1.96" (5cm) in diameter and is 0.55" (1.4cm) thick. Gauge has readout of 0 to 5,000 psi and the air-spool comes standard with Viton O-rings so its nitrox ready out of the box.

Highland by XS Scuba's depth gauge capsule is also a compact gauge measuring a mere 1.95" (5cm) in diameter and is 0.90" (2.3cm) thick. This very accurate oil filled depth gauge reads depth from 0' to 220' and comes equipped with a maximum depth indicator needle (MDIN). The MDNI will remain at the maximum depth reached for the duration of the dive to indicate the diver's deepest depth reached during the dive. This feature allows the diver to not record that depth while diving, yet will be available upon surfacing for later calculations for repetitive dives.

The Highland by XS Scuba's depth gauge capsule, is durable with its chromed brass housing ring. The depth gauge has a luminescent gauge face for easy reading when night diving or in low light conditions. Compact, low profile and tough as nails, this is one great gauge. Both gauges are housed in a durable non-corrosive thermoplastic boot with 2 loops for attachment of a clip or lanyard.

Dive gear weighs a lot and can get bulky. If there is a way to streamline it and make it weigh less it's a plus for the diver. Streamlining reduces water resistance, conserves air, and is less likely to get snagged on something. If your gear weighs less it's easier to transport to and from the boat or dive site, and with weight restrictions when we fly every ounce (gram) counts. XS Scuba's Miflex high pressure (HP) carbon hoses address both these issues. Hose is 35% thinner than traditional rubber HP hoses 0.3" (7.8mm), this streamlined design lowers your profile, reducing water resistance, is less likely to snag and helps conserve air due to less effort when fining. Hose is 50% lighter than traditional rubber hoses and measures 32" (81.3cm) in length, less weigh, better travel and transport.

The graphite carbon color hoses are factory cleaned and nitrox ready with Viton O-rings out-of-the-box. Hose has a durable abrasion resistant nylon exterior layer. High pressure gauge hose is a lightweight, pliable design that provide a much more enjoyable scuba experience. The hose is durable, compact and much easier-to-pack in a regulator bag than a traditional rubber hose. Hoses are equipped with standard 7/16-20 UNF male and 7/16-20 UNF female threaded ends. Hose fittings are made from durable corrosion resistant marine grade brass with electro-less nickel plating and the swivel end has a 0.55" (14mm) deep air-spool well. The XS Scuba Miflex Carbon HP Hose has a working pressure of 4,500 psi (300 bars) and a burst pressure of 29,000 psi (2,000 bars).

Warranty Information

This product has a limited warranty of 24 months.
866-977-2822

Features

  • Low Profiled & Ergonomically Designed
  • Fits-In-Hand Comfortably
  • Easy to Read at a Glance w/Outstanding Graphics
  • Durable Noncorrosive Thermoplastic Boot
  • 2 Loops for Attachment of Clip or Lanyard
  • Pressure Gauge:
  • Chromed Brass Housing
  • Strong & Durable Design
  • Luminescent Gauge Face
  • Readout: 0 to 5,000 psi
  • Diameter: 1.96 (5cm)
  • Thickness: 0.55 (1.4 cm)
  • Air-Spool w/Viton O-Rings
  • Nitrox Ready Up to 40% Oxygen Out-of-the-Box
  • Depth Gauge:
  • Oil Filled Depth Gauge
  • Very Accurate
  • Readout: 0' to 220'
  • Maximum Depth Indicator Needle (MDIN)
  • MDIN:
    Extremely Handy for Logging Dive Information
    Follows Depth Needle to Deepest Point Reached on Dive
    Marks Maximum Depth Reached
  • Chromed Brass Housing Ring
  • Tuff-As-Nails
  • Diameter: 1.95 (5cm)
  • Thickness: .90 (2.3cm)
  • Hose:½:XS Scuba Miflex High Pressure Carbon Hose
  • Flexible, Durable, & Light Weight HP Hose
  • Compact, Easier-to-Pack-In Regulator Bag than Traditional Rubber Hose
  • Working Pressure: 4,500 psi (300 bar)
  • Burst Pressure: 29,000 psi (2,000 bars)
  • Standard 7/16-20 UNF Male and 7/16-20 UNF Female Threaded Ends
  • Hose Fittings: Durable Corrosion Resistant Electro-Less Nickel-Plated Marine Grade Brass
  • Length: 32 (81.3cm)
  • O.D. 0.3 (7.8mm)
  • 35% Thinner than Traditional Rubber HP Hoses
  • Streamlined Design Lowers your Profile, Reducing Water Resistance
  • 50% Lighter than Traditional Rubber Hoses
  • Better Travel and Transport
  • Durable Abrasion Resistant Nylon Exterior Layer
  • Factory Cleaned: Nitrox Ready w/Viton O-Rings Out-of-the-Box
  • 0.55 (14mm) Deep Air-Spool Well
  • Color: Carbon
best price guarantee icon
Best Price Guaranteed
Submit a price match

Product ID

• SKU:
• MFR:

Key Features

• Ergonomically designed two gauge console
• Easy to read graphics
• Pressure gauge readout of 0 to 5,000 psi
• Oil filled depth gauge
• Depth gauge readout of 0 to 220 ft

What's in the Box

• Pressure Gauge - Depth Gauge - Gauge Boot and HP Hose

Specifications

Gauge Materials Chromed Brass Housing Ring
Depth Readout 0' to 220'
Gauge Luminous Dial Yes
Max Depth Indicator Yes
Dimensions Pressure Gauge: (D½:a x D) 1.96 x 0.55 ( cm x 1.4cm)
Depth Gauge: (Dia. x D) 1.95 0.90 (5cm x 2.3cm)

Customer Reviews

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)