About Apeks WTX BC Pocket Cargo
The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver. A full range of TEK pockets have been designed to complement the WTX range. They can be attached to your WTX system or any other BC/Wing and/or dry suit. The system is modular so you can attach one pocket to the other if space is at a premium. A separate stainless-steel hardware kit is available for this.
The Large Cargo Pocket has bellow construction, a zipper closure and capability to attach directly to waistband grommets. It can also slide over the harness waistband even after the diver is suited up. 4 front brass grommets allow the smaller cargo pocket or the mesh pocket to be attached using screw and barrel set (see SKU: APXBNK). 4 rear brass grommets allow the pocket to attach directly to the WTX Harness (see SKU's: APXWTXH and APXOPWH) waistband using hardware kit (see SKU: APXBNK). Has a large web loop to slide over a BC lobe and two smaller web loops to slide over standard 2" (5cm) waistband webbing.
The Small Cargo Pocket can be fit to the front of the Large Cargo Pocket or directly to the WTX harness (see SKU's: APXWTXH and APXOPWH). It is an excellent size for carrying slates, floats, line markers or extra weights. The small pocket employs a hook n' loop closure that is easy and fail-safe. 4 rear brass grommets allow the pocket to attach directly to the WTX harness waistband using hardware kit. Small pocket comes equipped with a side attachment D-ring and a front pull D-ring for fast pocket access. Has two web loops to slide over standard 2" (5cm) waistband webbing. Both pockets are made from durable 1050D ballistic nylon, have internal loops for bungee cord attachment, and bottom brass drain grommet.
Warranty Information
This product has a limited warranty of 12 months.
https://us.aqualung.com/pages/warrantypolicy
760-597-5000
Apeks WTX BC Pocket Cargo Features
- APEKS WTX BC Pocket Cargo:
- Unparalleled Versatility, Modular Nature of System
- Full Range of TEK Pockets Designed to Complement WTX Range
- Can Be Attached to WTX System or Any Other BC/Wing and/or Dry Suit
- System: Modular Attach One Pocket to Another If Space Is-At-A-Premium
- Construction: Durable 1050D Ballistic Nylon
- Internal Loops for Bungee Cord Attachment
- Bottom Drain Grommet
- All Grommets Brass Construction
- 4 Rear Grommets: Allows Pocket to Attach Directly to WTX Harness
- Two Sizes to Choose From
- Large Cargo Pocket:
- Bellows Construction, w/Zipper Closure
- Capability to Attach Directly to Waistband Grommets
- Can Be Slid Over Harness Waistband Even After Diver is Suited Up
- 4 Front Grommets: Allows Smaller Cargo or Mesh Pocket to Be Attached
- WTX Harness: (see SKU's: APXWTXH and APXOPWH)
- Large Web Loop to Slide Over BC Lobe
- Two Smaller Web Loops to Slide Over Standard 2" (5cm) Waistband Webbing
- Small Cargo Pocket:
- Attaches Directly to WTX Harness (see SKU's: APXWTXH and APXOPWH)
- Excellent Size for Carrying Slates, Floats, Line Markers or Extra Weights
- Hook N' Loop Closure, Easy and Fail-Safe Design
- Side Attachment D-Ring
- Front Pull D-Ring for Fast Pocket Access
- Two Web Loops to Slide Over Standard 2" (5cm) Waistband Webbing